Carryboy Sport Lid SX-VWAD

NOVISauto care spray "TONNO TONIC"  for all luggage compartment covers and tarpaulins made of ABS hard plastic and vinyl. Tonno Tonic cares, cleans and gives your cover a fresh shine in a single step -  it effectively protects against UV light. Tonno Tonic has been thoroughly tested and is 100% suitable for protecting all ABS hard plastic and vinyl covers.  Remember to take care of your cover regularly!  - she will thank you with a good, fresh appearance and a long life! Tonno Tonic protects against harsh weather, cold winter and hot summer days. For care, simply spray Tonno Tonic on the previously cleaned tarpaulin. Wipe the surface dry with a clean cloth. Feel free to use Tonno Tonic to clean your tires - please wait 5 minutes after spraying before you can wipe the tire surface dry. Your rims will not be damaged. Tonno Tonic is available in a 0.47 liter spray bottle or as a 6-pack for dealers.

NOVISauto - pre-compressed, permanently elastic joint sealing tape  for sealing the joint between the hard top or load compartment cover and the vehicle load box. Seals reliably with joint widths between 4 mm and 9 mm when expanded. The foam rubber is placed on the cleaned bottom edge of the upright hard top / tonneau cover  glued on, previously trimmed a little at the ends.  Then the hard top / cargo area cover is carefully aligned on the upper edge of the vehicle cargo box and fixed using the existing aluminum clamps. A detailed assembly description is enclosed with the delivery.

NOVISAUTO pickup tailgate seal MAXSEAL for all common EU and US pickup vehicles: NOVISauto tailgate seal "MAX SEAL" keeps your pickup loading area free from dust, rain and snow - this EPDM sealing tape (ethylene propylene diene)  is a foil-shaped, synthetic rubber, a material according to DIN EN 13956 that is often used for roof and facade seals,  used for pond sealing.  The tailgate seal MAX - SEAL is up to 500% stretchable, permanently elastic (even at temperatures between -40 degrees Celsius and +120 degrees) and has a life expectancy of decades. The MAX - SEAL tailgate seals are resistant to aging and ozone without additional surface protection. They are UV and IR stable and resistant to a variety of chemical media.  (Source: from Wikipedia). Max Seal is easy to install in minutes using a do-it-yourself method - simply cut and glue the ends! - The band is long enough and suitable for  all pickup trucks with a tonneau cover or hard top. Equip your pickup with a tailgate seal from CARRYBOY / NOVISAUTO. This means that water and dust no longer have any chance of entering the pickup cargo area. The easy, quick and convenient way to seal your tailgate yourself.

NOVISauto - knee-friendly anti-slip mat, padded and insulated for workshop or garden work VERSATILE USE - Work mat for professional or DIY needs dimensionally stable, extremely hard-wearing and durable Generous foaming - therefore well padded and insulated towards the bottom Waterproof and quick drying Comfortable non-slip surface with coarse polypropylene needle felt (ideal for kneeling or lying down) Easily remove dirt with a garden hose or by knocking it out Practically stowed - folds in the middle Unfolded 60cm*120cm in size Ultra tough product made from 100% recyclable polypropylene  

NOVISauto – B-Light / B-Light  is the ultra-bright lighting for your pick-up loading area made of 8 brightly lit LED units, each with 6 LED bulbs. B-Light fits all pickup trucks and models - B-Light brightly illuminates the entire cargo area of your pickup - There is only one switch for the whole light system. B light is suitable for all pickups with any cargo area covers or hardtop.  To protect against slipping loads, B-Light should be mounted under the U-rail on the side.

Saddlebag -  Tool storage bag for all pick-up holds, soft material The ultra-practical storage bag for tools, sporting goods and lots of small items for the driver's side of your pick-up The Novisauto saddlebag has been specially made for each open-rail pick-up bed and is mounted on the rails of selected bed covers for maximum compatibility. Alternatively, the stowage bag can also be attached to the inside edge of the cargo area using clamps. With some vehicles (e.g. Nissan Navara) the lashing system can also be used to attach the tool storage bag if the loading sill is covered. The Saddlebag consists of two loading levels. The lower level features a zip closure and exterior pockets. Heavy-duty inserts ensure lasting strength and a tailored appearance. Lift, take off and take away  in a single operation, always and at hand on every occasion. You take the saddlebag with you to your workplace - together with all inserted tools and assembly parts! In the platform, you fix the storage box to save space on the side between the platform flap and the wheel housing.   

CARRYBOY - aluminum cross member elliptical shape for mounting on all CARRYBOY hardtops with roof rails Length of the crossbars 125 cm Sturdy aluminum with a satin finish Including rubber insert Including attachments (matching feet) for the hardtop roof rails Can be attached to the hardtop without drilling When ordering, please name the built-in hardtop / cargo area roller blind - model The crossbars are ideal for attaching the CARRYBOY roof baskets - available in 5 different sizes.

NOVISauto - bed mat model BedMat in universal size for all common and non-common pickup models (also for special editions, extended vehicles) The NOVISAuto anti-slip pickup floor mat for the loading area is a perfect addition to your pickup. The anti-slip mat from NOVISAuto not only impresses with its properties as a non-slip accessory for the loading area, but also as an instrument for visually enhancing your loading area. The Bedmat is an integrated system made of permanently stable and durable materials. The surface of the anti-slip mat is covered with a comfortable but easy-care artificial carpet. This carpet provides the anti-slip properties and can be kept clean with a high-pressure cleaner or a hand brush. The base of the anti-slip mat for your pickup is made from 100% recycled polypropylene. The material is foamed and applied in 3 separate layers. In combination with the carpet surface, this ensures a unique protection factor against chemicals, dust & dirt, impacts and point loads. The padding and underlay also make work on the loading area easier. The surface prevents objects that are transported on the loading area from slipping. The NOVISAuto Bedmat model can be universally installed in all pickup vehicles. Perforations for US - full-size pickups (e.g. Dodge RAM, Ford F150) are already in place. For other less common vehicles, the mat can easily be cut to size with a sharpened box cutter. The dimensions of 170cm width and 250cm length allow installation in almost all pickup - loading areas. It can be installed either on a cargo area liner, on a spray coating or on the bare surface of the cargo floor. Appropriate adhesive pads with Velcro are included in the delivery. Ideally suited for extra cab or singlecab pickups (Toyota Hilux singlecab, VW Amarok singlecab, Ford Ranger singlecab, Ford Ranger extra cab, Toyota Hilux extra cab, Nissan Navara extra cab, Isuzu D-Max extra cab) or individual loading area extensions (e.g. by the company Veeth in the Netherlands ). universally applicable for all models Dimensionally stable, extremely hard-wearing and durable - therefore the best protection against scratches and damage to the loading area Protection against negative environmental influences (e.g. chemicals, acids, rust, etc.) easy to assemble - no drilling required in the vehicle platform ideally suited for an exceptionally long service life stable and easy to use continuous fabric between loading area and tailgate against unwanted deposits Anti-slip surface for safe transport This is the most innovative and unique load compartment liner there is. You get the look and comfort of a rug in an ultra-tough 100% polypropylene product. Thus, your loading area is not only protected against impacts and damage, but the bed liner also withstands stresses from gravel to battery acid.  

NOVISauto - SwingCase tool box for VW Amarok 2010-2020 Ultra-practical box for tools, sporting goods and many small parts You can reach your tools and small parts by effortlessly detaching your SwingCase box from the holder with just one movement and swiveling it towards you. No slouching or "bunk climbing"  is more needed! NOVISauto, the market leader in selling popular Volkswagen Amarok accessories, builds these versatile storage boxes from impact-resistant ABS hard plastic for your convenience - strong enough for a long Amarok truck life. SwingCase is "tough", it is waterproof, space-saving and therefore ideally suited for your Volkswagen Amarok. - The purchase of two SwingCases for both sides of your VW Amarok platform wall is the best choice - space-saving, absolutely tight and easy to handle! Raise, lift off and take with you in a single operation, always ready to hand on any occasion: You take the SwingCase with you to your construction site or workplace - together with all the packed tools and assembly parts!  SwingCase can be parked lying down or standing as usual. To save space, fix the SwingCase tool box to the side of the Volkswagen Amarok between the platform door and the wheel housing. SwingCase for your VW Amarok truck on the passenger side can be swung out , and thus fills the previously unused platform space between the wheel housing and tailgate - adapted for every pickup of all vehicle manufacturers, models and years of construction. The box can be locked with a rotary lock and permanently locked with a key. SwingCase is made of tough and durable ABS rigid plastic, strong enough to hold a weight of up to 34kg. The tool box is resistant to UV radiation and does not fade. In addition, the tool box can be secured to the vehicle with a small padlock. This locking device is already included in many new swing case storage box series. This means that removing the VW Amarok is no longer possible. The tool box (tool box) and storage box is an essential VW Amarok accessory for every tradesman or hobby - do-it-yourselfers. The initial installation takes only about 15 minutes with 6 self-tapping sheet metal screws. Please note that the swing case cannot be installed in combination with an extendable loading floor. In the case of Volkswagen Amarok pickups with an inserted load compartment tub, this must be cut out in two places to ensure that the swing case tool box is held securely. This is the only way to ensure that the bracket fits perfectly on the vehicle.

Trunk liner for Volkswagen Amarok Double Cab 2010-2020 dimensionally stable, extremely hard-wearing and durable - therefore the best protection against scratches and damage to the loading area Protection against negative environmental influences (e.g. chemicals, acids, rust, etc.) precisely fitting and easy to assemble - no drilling required in the vehicle platform Including screw points for original lashing rails on the sides of the loading area ideally suited for an exceptionally long service life stable and easy to use for a variety of commercial uses made of durable polyethylene (HDPE) Economical in daily use, as it protects the paintwork at low cost Made in the USA - no re-import from the Far East. Accesories Tailgate protection with edge protection included assembly description with the necessary mounting accessories

Item No. CB-550x CARRYBOY - roof basket made of stainless steel, light and very stable aluminum with matching crossbars Available in 4 different sizes and 2 colors (silver or black): CB-550x-00    100*100cm CB-550x-01    100*120cm CB-550x-02    100*160cm CB-550x-03    100*130cm   The luggage rack can be mounted on most cars, SUVs, VANs, pickups, trucks and Carryboy hardtops with suitable fasteners (self-assembly is possible). - No drilling required! - Dimensionally stable, unbreakable and resilient - easy to assemble - do it yourself - - available in different dimensions - secure supply of spare parts The roof basket is supplied with crossbars and can be attached to the roof rails using the mounting kit supplied. Appropriate fasteners (roof racks) are required for attachment to SUVs and pickup truck cabs. If you have any questions, please contact us by telephone on 02151-393593 or by e-mail at info@carryboy.de Please ask for delivery times for additional sizes.

NOVISauto - load compartment liner, non-slip model BedRug BFRRD12 for Ford Ranger Double Cab 2012+ dimensionally stable, extremely hard-wearing and durable - therefore the best protection against scratches and damage to the loading area Protection against negative environmental influences (e.g. chemicals, acids, rust, etc.) precisely fitting and easy to assemble - no drilling required in the vehicle platform ideally suited for an exceptionally long service life it is stable and easy to use continuous fabric-like PP plastic between loading area and tailgate, this effectively protects the hinges of the platform flap Anti-slip surface for safe transport  The innovative and unique BEDRUG load compartment liner made of 100% polypropylene not only protects against impact and damage, but also withstands stress from gravel to battery acid.  

Equip your pickup truck of any brand with an Elevate Rack crossbar from NOVISauto. Expand your storage space with accessories from the storage and transport solutions section. Our accessories adapt seamlessly to your vehicle. The assembly kit and installation instructions are included. If required, we can carry out the professional installation of the accessories ourselves. Our employees are technically skilled, professionally competent and practically experienced. Your NOVISauto accessories at a glance: For all brands of all years NOVISauto accessories manufactured by Realt Truck Truxedo Can be combined with load compartment covers with rail system or T-slot system More space, more joy - Elevate Rack crossbar system is an ideal storage and transport solution The Elevate Rack is a unique solution for your pickup truck. Expand your cargo space with raised crossbars at cab height. This means no cargo space is lost on the bed. On the contrary - new chances and opportunities arise. More cargo space, more room. We offer various accessories to optimise the loading options. Choose between a roof basket, kayak holder, load securing and lashing clamps. Our unique solution can be combined with load area covers. So don’t hesitate and use this unique product!

Carryboy - full bed pull-out shelf  -  Pull-out shelf cut out of aluminum checker plate according to the contour of the wheel housing This extendable loading floor is also available in combination with a drawer system in different sizes (CB-800). - Load capacity up to 350 kg! - Easy loading and unloading - you save time with it! - Non-slip, hard-wearing, easy-to-clean loading surface made of aluminum checker plate - best quality in processing and design - dimensionally stable, unbreakable and loadable up to approx. 350 kg - secure supply of spare parts - Simple assembly according to video and written assembly instructions - Convenient securing of the load with the integrated lashing eyes - The ball-bearing loading floor is unlocked with the handle - The loading area is almost completely filled - Wheel housings are cut out A notice:  these products are so-called selection products, which are individually manufactured to your order. This pull-out drawer is divided into S / M / L categories in terms of dimensions. Due to the rectangular shape, the loading floor fits on different vehicles. As an option, the loading floor can be fully adapted to the vehicle. The area of the accessory drawer is expanded to include the area behind the wheel arches. When ordering, please indicate the vehicle in question so that we can assign you the right vehicle. You can also choose between the pull-out loading floor in aluminum or covered with an anti-slip rubber coating.

CARRYBOY ROOF TENT CB-102-2P for all common pickups, SUVs and mid-size cars: Material:   Materials from the outside:   Oxford polyester with silver coating and UPF50+ (absorbs more than 98% of UV rays)   Material from inside:   190 g/sqm rip-stop polyester with PU 2000mm   Bottom material:          210 Denier Oxford Nylon with PU 2000mm Interior:   rust-free aluminum struts ensure structure and comfortable lying   6 cm foam mattress can be removed and cleaned    6 large windows with insect screens   2 shoe bags at the entrance - the dirt stays outside Comfort: Self-deploying within a few seconds using gas pressure springs spacious room for 2-3 people Protected against wind, weather and rain Foam mattress 6cm 2 extra shoe boxes Entry ladder can be extended by a maximum of 2m, fixed to the tent and foldable Fly screens in front of the windows Reliable UV protection tent size:   Unfolded & erected:           1,340 x 2,165 x 1,343mm   folded:             1,340 x 2,165 x 300mm   Weight:                               56 kg (together with ladder)    

Novisauto Pathfinder-1 roof tent The Novisauto roof tent for every pickup or at least mid-range SUV is one of the first innovative electrically controllable roof tents. You can straighten it up and down with a simple push of a button, alternatively you can also do it by hand. The tent is set up on the vehicle using clamps on cross members. Comfort : Self-erecting by remote control within 60 seconds Power supply via socket of the vehicle (3m cable) spacious interior with enough space for 2 people Reliable protection against wind and rain with extendable telescopic aluminum ladder - loadable up to 150kg with 6cm foam mattress. The cotton cover can be removed and washed. 2 extra hanging pockets for storing shoes, for example double fly screens in front of the windows and the entrance Tent size :   unfolded & erected (inside):      1,200(W) x 2,000(L) x 1,100(H) mm   Weight:                                       56 kg (together with ladder)   Material :   Material outside:   Oxford polyester with silver coating and UPF50+ *   Materials inside:   190 g/sqm ripstop polyester with 2000 mm water column   Bottom material:   210 Denier Oxford Nylon with 2000mm hydrostatic head Interior :   Stainless steel struts provide structure.   6 cm foam mattress can be removed with cover   6 windows with insect screen and privacy screen   2 additional shoe bags  

Carryboy - Slide Floor Universal  -  Pull-out shelf made of aluminum checker plate with a three-sided frame for all mid-size pickup trucks This extendable loading floor is also available in combination with a drawer system in different sizes (CB-800). - Load capacity up to 350 kg! - Easy loading and unloading - you save time with it! - Non-slip, hard-wearing, easy-to-clean loading surface made of aluminum checker plate - best quality in processing and design - dimensionally stable, unbreakable and loadable up to approx. 350 kg - secure supply of spare parts - Simple assembly according to video and written assembly instructions - Convenient securing of the load with the integrated lashing eyes - The ball-bearing loading floor is unlocked with the handle. A notice:  these products are so-called selection products, which are individually manufactured to your order. This pull-out drawer is divided into S / M / L categories in terms of dimensions. Due to the rectangular shape, the loading floor fits on different vehicles. As an option, the loading floor can be fully adapted to the vehicle. The area of the accessory drawer is expanded to include the area behind the wheel arches. The universal loading floor CB-778 is available as an accessory for these pickup vehicles with the following dimensions: Size S (1020*1380*208) - Toyota Hilux Revo, Isuzu Dmax, Mitsubishi L200, Fiat Fullback Size M (1080*1380*208) - Ford Ranger, Nissan Navara NP300, Renault Alaskan Size L (1200*1440*208) - VW Amarok Size XL - with the appropriate width, but 1700 mm length for single and extracab pickups. When ordering, please indicate the vehicle in question so that we can assign you the right vehicle. You can also choose between the pull-out loading floor in aluminum or covered with an anti-slip rubber coating.

Der vielseitige Offroad - Ladeflächenaufbau für Ihren europäischen Pickup!Unser Offroad - Profi - Rack für alle gängigen europäischen Pickups (Ford Ranger, Toyota Hilux, VW Amarok, Isuzu D-Max, Mitsubishi L200, Maxus T90, Nissan Navara) ist eine vielseitige Platform für alle Anwendungen von Gewerbe bis Freizeit. Verwandeln Sie Ihre Ladefläche Ihres Pickups zu einer Multifunktionsplattform mit unendlichen Anwendungsmöglichkeiten.Der Ladeflächenträger XRS für den Ford Ranger und Toyota Hilux benutzt die bewährte 4-CORE Technologie. Diese erlaubt es, Schrauben oder Nutensteine auf jeder Seite der Trägerschiene zu befestigen - so kann fast jedes Zubehörteil am Ladeflächenträger XRS Rack befestigt werden.Der robuste Ladeflächenaufbau Modell XRS für Pickups wie den Ford Ranger und Toyota Hilux besticht durch folgende Eigenschaften: Kombination der Materialien Stahl und Aluminium - besonders stabil bei vergleichsweise geringem GewichtTrägerkonstruktion aus Stahl / Befestigungselemente und Querträger aus Aluminiumträgern mit 4-CORE Technologie Belastbar bis 270kg statisch - 135kg Offroad - somit ideal geeignet für Dachzelte und Camping Ausstattung einfache Montage ohne Bohren - Klemmbefestigung mattschwarze Oberflächenbeschichtung Reichlich Quertäger zur Befestigung von ZubehörGroße Anzahl von Befestigungslöchern für Zubehör und Licher an der TrägerkonstruktionMultifunktionale Befestigungsplatte im Set enthalten (1x) - zur Befestigung von Ausrüstung, Werkzeug, Zubehör, Wassertanks uvm. - kann in jeder Position entlang der Querträger angeschraubt werden.Ausstattungen des XRS Ford Ranger / Toyota Hilux / Isuzu D-Max Rack wird Ihnen im Zubehörbereich weiter unten angezeigt:Zusätzliche XRS Befestigungsplatten (montierbar an allen 3 Außenseiten sowie Innenseiten)Abklappbare und verriegelbare XRS Arbeitsplattform (inklusive extra Befestigungsplatte an der Außenseite - verdoppelt die Staumöglichkeiten und schützt innenliegendes Transportgut)XRS Haltegriffe / Klampen zum Einstieg oder Befestigung von SpanngurtenXRS Bodenplatten für Dach (erlaubt auch Befestigung von kleinen Gegenständen, die sonst durch die Querträger fallen würden)XRS Halter für Camping - KlapptischeXRS Kit zur Erweiterung der Dachfläche (Überhang - Kit für die Kabine zur Befestigung von weiteren Plattformen oder langen Dachzelten)XRS Verzurrösen im Set von 4 StückXRS MarkiesenhalterungenXRS Schnellbefestigungen für DachzelteXRS zu SRM Dachplatform - Konnektoren Statten Sie Ihren Pickup mit einem hochwertigen Ladeflächenträger von NOVISauto aus. Das XRS Rack bietet die ideale Grundlage für eine vielseitige und individualisierte Nutzung. Alle Teile des Ladeflächensystems sind auf eine intensive Offroad Nutzung ausgelegt und damit für jegliche Nutzungsmöglichkeit - inklusive Gewerbeanwendung - geeignet. Der XRS Rack wird inklusive einer Befestigungsplatte, Montagekit und Anleitung geliefert. Benötigen Sie für Ihre Ausflüge eine hochwertige Plattform für Ihre Camping Ausstattung? Kein Problem!Bauen Sie Ihr Dachzelt mit den Schellbefestigungen in einigen Minuten ohne Werkzeuge auf die Ladefläche auf. Für besonders große Dachzelte sowie viel Transportgut kann das XRS Rack mit einem zusätzlichen Adapter nochmals um 140cm über die Kabine oder nach hinten verlängert werden. Die Tischgarnitur für den Naturausflug kann mit Hilfe zusätzlicher Halter direkt auf der Unterseite des Racks befestigt werden und nimmt keinen wertvollen Platz weg. Auch die Markise kann bequem an der Seite des Ladeflächenträgers befestigt werden. Die Halterung hierfür ist so geformt, dass die Markiese nicht im Weg ist.Der zusätzlich erhältliche Klapptisch bietet zweierlei Vorteile. Zunächst ist dieser so gestaltet, dass ausreichend Platz zur Befestigung von schmalen Kanistern oder Werkzeug zwischen Tisch und Rack vorhanden ist. Der Klapptisch kann verschlossen werden, um das Transportgut dahinter vor Diebstahl zu schützen. Auf der Außenseite des Klapptisches ist eine Befestigungsplatte vorhanden, um weiteres Gut daran zu befestigen. Die nutzbare Fläche ist somit verdoppelt! Gleichzeitig bietet der Tisch durch seine Aluminiumoberfläche eine Arbeits-, und Stauplattform im ausgeklapptem Zustand. Unser Angebot runden wir ab mit unserem Ersatzteilservice und einer hervorragenden Beratung.  

Carryboy tool drawer model CB-800 Tool drawers and pull-out shelf with three-sided frame  for all European midsize pickups. (Ford Ranger, Nissan Navara, VW Amarok, Mercedes X, Mitsubishi L200, Renault Alaskan, Fiat Fullback, Toyota Hilux, Isuzu D-Max) - Load capacity of the pulled-out drawers/loading floor up to 100 kg! - Easy loading and unloading - you save time with it! - Non-slip, durable, easy-to-clean loading surface - best quality in processing and design - dimensionally stable, unbreakable and resilient - secure supply of spare parts - easy assembly - fits in every pick-up, depending on the size - Lockable drawers for extra security - recommended size for installation with hardtop - p

The basic version of the Huckepack camping pickup structure combines everything you need to experience a short adventure. Drive to the North Sea for the weekend and listen to the sound of the waves. How about a 4 to 5 day short trip to the Black Forest and enjoy the peace and quiet while the forest and nature embrace you?  Our motto "Freedom on wheels" is our motto. Enjoy the opportunity to go anywhere. Even the basic version is generously equipped and covers all your basic needs so that nothing stands in the way of your trip. The structure can be packed and unpacked quickly and easily - you can travel from one place to another in just a few minutes. The Aqualon tent provides reliable protection from wind and weather, allows light and solar heat to pass through - at the same time it is a tried and tested material from sailing ship construction. The main function of the basic version - a good night's sleep and good rest - is taken care of. A hammock and mattresses are included. The side, retractable entry ladder makes it easy to enter and exit the structure. Our high quality ensures a very long service life over several pickups. We only use the best materials such as stainless steel, use high-precision machines for perfect laser cutting and intelligent solutions such as a floor with water drainage. In addition, all exterior materials are powder-coated black and the interior is powder-coated gray. Of course, your safety should not be neglected. A fire extinguisher and a smoke and CO2 alarm are naturally included. Make your dreams come true and let there be no limits to your freedom!

Carryboy hardtop model SO with tinted folding windows on the side Accessory for Volkswagen Amarok crew cab - available in all vehicle colors side tinted hinged windows with lock Tinted all-glass rear door with heated rear window Front sliding window All side flaps and the tailgate are frameless! Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manually adjustable Automatic on/off switch when opening/closing the tailgate when you close the hardtop rear door, you also close the platform hatch the black aluminum roof rails have been tested with a load capacity of 80 kg Spoiler with 3rd brake light in LED technology Hinges in stainless steel Mounting kit and description are included in the delivery The CARRYBOY hardtop SO-VWAD for the VW Amarok is characterized by its unique design. The tinted glass side flaps of the hard top form a unit with the shell of the hard top. The incomparable design is not insignificantly influenced by the frameless side flaps and the frameless tailgate. No more annoying frames that would disturb the design line of the hardtop and the VW Amarok pickup! The CARRYBOY hardtop SO is the ideal VW Amarok accessory for anyone who wants to access the load compartment from all sides, but at the same time would like to benefit from maximum storage volume. In addition to the hardtop, we also recommend other VW Amarok accessories from CARRYBOY for commercial businesses: MAX-SEAL tailgate seal swing-out storage boxes SWINGCASE for driver and passenger side Load compartment tub in carpet design or as a hard-shell tub pull-out loading floor with integrated drawer system CB-800. For even better illumination of the Amarok loading space, we offer our proven BLight lighting system with 6 practical LED lights that can be attached under the edge of the loading area. The wiring can be connected to the permanent power supply of the hard top.  

Carryboy hardtop model SO56 a side tinted folding window and a sliding window for Volkswagen Amarok double cab 2010-2020 - available in all body colors tinted folding window on the driver's side tinted sliding window on the passenger side sliding front window Tinted all-glass rear door without rear window heating Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manually adjustable when you close the hardtop rear door, you also close the platform hatch the black, removable roof rails have been tested with a load capacity of 80 kg Hardtop facelift with improved contours and 3rd brake light integrated in the roof Hardened stainless steel hinges Mounting kit and description are included in the delivery  

Carryboy hardtop model SO(N)R with tinted folding windows on the side for Volkswagen Amarok crew cab - available in all body colors side tinted hinged window with lock and connection ZV Tinted all-glass rear door with rear window heating and ZV connection Front sliding window All side flaps and the tailgate are frameless! Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manually adjustable Automatic on/off switch when opening/closing the tailgate when you close the hardtop rear door, you also close the platform hatch the black aluminum roof rails have been tested with a load capacity of 80 kg 3. Brakes with indicated GRP spoiler Hinges in stainless steel Mounting kit and description are included in the delivery The CARRYBOY hardtop SONR-VWAD for the VW Amarok is characterized by its unique design. The tinted glass side flaps of the hard top form a unit with the shell of the hard top. The incomparable design is not insignificantly influenced by the frameless side flaps and the frameless tailgate. No more annoying frames that would disturb the design line of the hardtop and the VW Amarok pickup! The CARRYBOY hardtop SO is the ideal VW Amarok accessory for anyone who wants to access the load compartment from all sides, but at the same time would like to benefit from maximum storage volume. In addition to the hardtop, we also recommend other VW Amarok accessories from CARRYBOY for commercial businesses: MAX-SEAL tailgate seal swing-out storage boxes SWINGCASE for driver and passenger side Load compartment tub in carpet design or as a hard-shell tub pull-out loading floor with integrated drawer system CB-800. For even better illumination of the Amarok loading space, we offer our proven BLight lighting system with 6 practical LED lights that can be attached under the edge of the loading area. The wiring can be connected to the permanent power supply of the hard top.  

CARRYBOY hardtop model SLR with side tinted folding windows for VW Amarok double cab 2023+ available in all vehicle colors SUV-style side tinted folding windows (with no visible fasteners throughout) Tinted all-glass rear door with heating (SUV style) bow window Bow sliding window optionally available (additional costs) The rear door can also be opened from the inside for safety Interior headliner made of robust, close-meshed black and gray woven fabric no vinyl! - therefore no risk of mildew, easy to clean and repair Interior lamp 3-way manual  adjustable Automatic on-off switch when opening and closing the rear door When you close the hardtop rear door, you close the platform flap at the same time The roof rails have been tested with a load capacity of 70 kg GRP spoiler with paint Hinges in stainless steel Assembly kit and description are included in the delivery  

Carryboy hardtop model S6 with tinted vent windows on the side for VW Amarok double cab 2010-2020 - available in all body colors Lateral, tinted hinged windows in one piece up to the driver's cabin Tinted all-glass rear door with heated rear window sliding front window the rear door can also be opened from the inside for safety 3rd brake light integrated in the rear window Roof lining made of robust, close-meshed black-grey  woven fabric No vinyl!!! and therefore no risk of mold stains, easy to clean and repair Interior lamp 3-fold manually adjustable from the inside When you close the hardtop rear door, you also lock the platform hatch Airline roof rail - tested to 80kg for extra loading capacity Stainless steel hinges Mounting kit and description included Spare parts guaranteed even after years

One of our BEST for the Volkswagen Amarok Double Cab 2010-2020 ! our Carryboy professional hardtop model WM - VWAD - Workman, finished in universal white - but also available in any other color. The robust first-class professional hardtop from Carryboy for trade, commerce, sports, leisure and the public sector, an ideal hardtop for the Volkswagen Amarok and the entire pickup vehicle fleet! Front window untinted for maximum ease of loading and unloading thanks to wing flaps the hardtop with the highest through-loading height in our range! Both from behind and from the sides. available in white (painted finish - top coat is clear coat) also available in all vehicle colors from the world market leader Carryboy side GfK wing flaps Tinted all-glass rear window for visibility securely lockable rear door and side flaps with rotary lock and cylinder (optional ZV connection) Hardtop closes the entire cargo area and the tailgate at the same time Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair bright LED interior lamp indicated spoiler with 3rd brake light in LED technology robust hinges in stainless steel on the tailgate and side flaps Mounting kit and description are included in the delivery Equip your Volkswagen Amarok double cab (2010 - 2020) with a high-quality hardtop from CARRYBOY. The WM offers the ideal basis for commercial use. Maximum through-loading height from the sides and rear, as well as the particularly robust design maximize the available hard top interior volume. All components of the hardtop for the VW Amarok were designed and tested for the stressful and frequent use in daily business. The roof rails on this model have been removed in favor of the hardtop height. However, it is possible to install a complete roof rack system on the hard top as an additional accessory. If desired, this can also extend beyond the driver's cab of the VW Amarok. It is available in the sizes 1200x1900mm and 1200x2400mm. Check with us for availability and price. An even more convenient operation of the VW Amarok WM hardtop is possible by connecting it to the vehicle's central locking system. All three flaps are locked or unlocked at the touch of a button on the vehicle key. We round off our offer with our spare parts service. For CARRYBOY hardtops, we will continue to offer the right spare parts for years and decades, even beyond the service range of the vehicle manufacturers.    

One of our BEST for the Volkswagen Amarok Doublecab 2023+! our Carryboy professional hardtop model WM-Workman, finished in universal white - but also available in any other color. Carryboy's robust first-class professional hardtop for trade, commerce, sports, leisure and the public sector, an ideal hardtop for the vehicle fleet! Bow sliding window optionally available (additional costs) for maximum convenience in loading and unloading available in universal white (painted finish - top coat is clear coat) also available in all vehicle colors from the world market leader Carryboy side GfK flaps Tinted all-glass rear door lockable rear door (chrome lock) the tailgate can be opened from the inside Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manual  adjustable Automatic on/off switch when opening/closing the tailgate when you close the hardtop rear door, you also close the platform hatch Spoiler with 3rd brake light Hinges in stainless steel Mounting kit and description are included in the delivery

Carryboy hardtop model 560 with tinted sliding windows on the side for Volkswagen Amarok Double Cab 2010-2020 - in all body colors. tinted sliding side windows sliding front window Tinted all-glass rear door with heated rear window Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manually adjustable Automatic on/off switch when opening/closing the tailgate when you close the hardtop rear door, you also close the platform hatch the black aluminum roof rails have been tested with a load capacity of 80 kg Spoiler with 3rd brake light Hinges in stainless steel Mounting kit and description are included in the delivery   The CARRYBOY Hardtop 560-VWAD for the VW Amarok is characterized by its unique design. The tinted glass sliding hardtop windows form a unit with the hardtop shell. The frame of the sliding window adapts perfectly to the contour of the hard top. No more protruding window frames that would disturb the design line of the hardtop and the VW Amarok pickup! The CARRYBOY Hardtop 560 is the ideal VW Amarok accessory for all dog owners. Your animal will thank you. The large sliding windows on all sides ensure sufficient air supply in the hard top. In order to be able to open the windows completely, we offer specially developed dog guards for installation on the windows. The Hardtop 560 also offers ideal properties for everyday use for all other users. Convenient use, durability, plenty of light in the cargo area and fuel savings of up to 10%! In addition, we ensure the supply of spare parts for all our hardtops for many years. Even in the event of damage, the GRP material used is characterized by its high user and repair friendliness. An even more convenient operation of the VW Amarok hardtop is possible with an optional connection to the vehicle's ZV!  

Carryboy hardtop model 560 without side window for Volkswagen Amarok double cab 2010-2020 - available in all body colors. Standard version: without side windows, closed sides in one piece bow sliding window 2-component primer tinted all-glass rear door with heated rear window Headliner made of robust, close-meshed black-grey woven fabric, no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3 times manually adjustable from the inside, automatic on/off switch when Opening/closing the tailgate when you lock the hardtop rear door, you also lock the platform hatch the black, removable roof rails have been tested up to 80 kg Spoiler with 3rd brake light Hinges in stainless steel Construction without drilling. Installation with load compartment tray possible Mounting kit and description are included in the delivery The CARRYBOY hardtop without side windows for the Volkswagen Amarok is ideal for commercial use. Robust GRP material, high-quality paintwork and privacy protection from both sides also allow valuable goods to be transported on the loading area of your Amarok. The hardtop 560oS for the VW Amarok has a glass rear window with rear window heating for an unobstructed view to the rear, this can also be replaced with a painted tailgate if desired. With CARRYBOY hardtops you also secure our spare parts service. Benefit from a secure supply of spare parts beyond the manufacturer's service range.

The high-quality CARRYBOY hardtop model SR5oS from Carryboy is the perfect extension for your double cab pickup VW Amarok 2023+. Benefit from our strong CARRYBOY hardtop model SR5 from Carryboy for your Volkswagen Amarok double cab.  Our hardtop for your Amarok 2023+ double cab (Doublecab) adapts seamlessly to your vehicle. The hardtop offers your pickup high-quality and comfortable protection. High-quality CARRYBOY design in SUV style available in all colors. Choose a custom-made hardtop in the color of your car, which comes with a mounting kit and installation instructions. If you have any questions, you can contact us at any time. We can professionally assemble the hardtop if necessary. Our employees are technically skilled, technically competent and practically experienced ! All equipment at a glance: no windows on the side / closed hardtop All-glass rear window : Large and tinted for maximum ease of loading and unloading, including rear window heating Untinted front window manual lock , optionally with automatic central locking Integrated spoiler with built-in 3rd brake light in LED technology (on vehicles without a 3rd brake light in the tailgate) Available in all vehicle colors No vinyl! The interior headliner is made of robust, close-meshed, black and gray woven fabric. This means there is no risk of mildew and the fabric is easy to clean and repair Rear door with robust stainless steel hinges Roof rails Mounting kit and instructions for your hardtop are included Hardtop at cabin height Bright LED interior lamp with automatic function Our recommendation for your Volkswagen Amarok 2023+ double cab Best service from a single source - before and after the purchase Take advantage of our first-class service! Questions or uncertainties? Talk to us by email or telephone! We would be happy to advise you in detail and in a customer-oriented manner . We work in the office AND warehouse every day. We have a wealth of experience spanning 16 years of practical performance. You can look forward to technically skilled, technically competent and practically experienced employees. Our unique spare parts (service) offers you spare parts for at least 10 years after product purchase! Our hardtop SR5 perfectly complements your VW Amarok double cab (Doublecab) built in 2023+. Protect your environment by using our products for life! Hardtops from CARRYBOY! Are you worried about sustainability or long-term use? No problem! Our products achieve sustainability through lifelong usability. The high-quality parts used are very robust. Quality hardtop model SR5 for your VW Amarok double cab 2023+ fully equipped from CARRYBOY The hardtop has cabin height . A smooth transition between the cabin and the hardtop increases the visual and stylistic value. Our SR5-VRD for your VW Amarok double cab (Doublecab) fully equipped includes an untinted front window . This does not affect your view to the rear. The particularly large, tinted all-glass rear window on our hardtop model SR5 for your Volkswagen Amarok 2023+ double cab enables convenient loading and unloading. At the same time, the large rear window allows for good visibility. Robust and rust-free hinges are used to attach the rear door. Our hardtop for your VW Amarok has a manual lock . Two keys are included for convenient opening and locking of the new Volkswagen Amarok double cab hardtop. The SR5 contains an integrated spoiler with a third brake light in LED technology (if the vehicle does not have a brake light in the tailgate). At the customer's request, we paint the SR5 hardtop in any vehicle color and many desired colors . Alternatively it can be supplied primed. You can rely on high-quality materials not only on the outside, but also on the inside. A bright LED interior lamp illuminates our hardtop model SR5 for your Amarok double cab 2023+. We do not use vinyl for the interior headliner of your VW Amarok Hardtop Double Cab (Doublecab) built in 2023+! We only use robust, close-meshed, black and gray woven fabric . We do not use vinyl headliners, so there is no risk of mildew, is easy to clean and repair, and looks high quality. The shell of all our Carryboy hardtops are made of GRP (fiberglass plastic). The material has a number of advantages over alternative materials. GRP is light, robust and easy to repair and maintain. For example, in recreational shipbuilding, it is preferred and used as standard due to these advantages. The ideal base material for your VW Amarok hardtop!

Carryboy chassis body  Aluminum tray model the perfect service structure on your pickup chassis Standard version: powder coated steel brackets roll bar in front Floor made of non-slip aluminum profiles integrated dirt trap Aluminum rear light guard (optional) All aluminum construction flap safety relatively easy assembly nevertheless: we recommend  assembly by a body shop Mounting kit included Secured supply of spare parts  from the "Authorized Dealer" (Carryboy Germany). We prefer collection by our customers, but we are also happy to deliver as a kit, protected in professional packaging in a wooden frame in outer packaging at an attractive delivery price - please ask about the freight costs.

  Carryboy chassis body  CSV-Tradesman model for VW Amarok double cab - the perfect service structure for your pickup chassis  - Available in all body colors. Standard version: - Standard universal white - galvanized chassis substructure - 3-sided apron made of GfK fiberglass - Base plate made of non-slip aluminum checker plate - Roof lining made of robust, easy-care woven fabric - Three bright LED interior lights - 3rd brake light (LED) - Stabilus gas shock absorbers - stainless steel rear footboards - certified rear lights protected by stainless steel protective grilles - detailed assembly description - relatively easy assembly (initial assembly 1 man day),  nonetheless:  we recommend  assembly by a body shop - Mounting kit included Secured supply of spare parts  from the "Authorized Dealer" (Carryboy Germany). In addition, on request, the complete interior equipment with storage compartments and shelves to secure your tools, equipment and load (according to separate offer) see accessories. We prefer collection by our customers, but we also deliver protected in professional packaging in a wooden frame in outer packaging at an attractive delivery price - please ask about the freight costs.

  Carryboy chassis body  CSV-Tradesman model for VW Amarok double cab - the perfect service structure for your pickup chassis  - Available in all body colors. Standard version: - Standard universal white - galvanized chassis substructure - 3-sided apron made of GfK fiberglass - Base plate made of non-slip aluminum checker plate - Roof lining made of robust, easy-care woven fabric - Three bright LED interior lights - 3rd brake light (LED) - Stabilus gas shock absorbers - stainless steel rear footboards - certified rear lights protected by stainless steel protective grilles - detailed assembly description - relatively easy assembly (initial assembly 1 man day),  nonetheless:  we recommend  assembly by a body shop - Mounting kit included Secured supply of spare parts  from the "Authorized Dealer" (Carryboy Germany). In addition, on request, the complete interior equipment with storage compartments and shelves to secure your tools, equipment and load (according to separate offer) see accessories. We prefer collection by our customers, but we also deliver protected in professional packaging in a wooden frame in outer packaging at an attractive delivery price - please ask about the freight costs.