Carryboy hardtop with hinged window S6-BXD

NOVISauto care spray "TONNO TONIC"  for all luggage compartment covers and tarpaulins made of ABS hard plastic and vinyl. Tonno Tonic cares, cleans and gives your cover a fresh shine in a single step -  it effectively protects against UV light. Tonno Tonic has been thoroughly tested and is 100% suitable for protecting all ABS hard plastic and vinyl covers.  Remember to take care of your cover regularly!  - she will thank you with a good, fresh appearance and a long life! Tonno Tonic protects against harsh weather, cold winter and hot summer days. For care, simply spray Tonno Tonic on the previously cleaned tarpaulin. Wipe the surface dry with a clean cloth. Feel free to use Tonno Tonic to clean your tires - please wait 5 minutes after spraying before you can wipe the tire surface dry. Your rims will not be damaged. Tonno Tonic is available in a 0.47 liter spray bottle or as a 6-pack for dealers.

NOVISauto - pre-compressed, permanently elastic joint sealing tape  for sealing the joint between the hard top or load compartment cover and the vehicle load box. Seals reliably with joint widths between 4 mm and 9 mm when expanded. The foam rubber is placed on the cleaned bottom edge of the upright hard top / tonneau cover  glued on, previously trimmed a little at the ends.  Then the hard top / cargo area cover is carefully aligned on the upper edge of the vehicle cargo box and fixed using the existing aluminum clamps. A detailed assembly description is enclosed with the delivery.

NOVISAUTO pickup tailgate seal MAXSEAL for all common EU and US pickup vehicles: NOVISauto tailgate seal "MAX SEAL" keeps your pickup loading area free from dust, rain and snow - this EPDM sealing tape (ethylene propylene diene)  is a foil-shaped, synthetic rubber, a material according to DIN EN 13956 that is often used for roof and facade seals,  used for pond sealing.  The tailgate seal MAX - SEAL is up to 500% stretchable, permanently elastic (even at temperatures between -40 degrees Celsius and +120 degrees) and has a life expectancy of decades. The MAX - SEAL tailgate seals are resistant to aging and ozone without additional surface protection. They are UV and IR stable and resistant to a variety of chemical media.  (Source: from Wikipedia). Max Seal is easy to install in minutes using a do-it-yourself method - simply cut and glue the ends! - The band is long enough and suitable for  all pickup trucks with a tonneau cover or hard top. Equip your pickup with a tailgate seal from CARRYBOY / NOVISAUTO. This means that water and dust no longer have any chance of entering the pickup cargo area. The easy, quick and convenient way to seal your tailgate yourself.

NOVISauto - knee-friendly anti-slip mat, padded and insulated for workshop or garden work VERSATILE USE - Work mat for professional or DIY needs dimensionally stable, extremely hard-wearing and durable Generous foaming - therefore well padded and insulated towards the bottom Waterproof and quick drying Comfortable non-slip surface with coarse polypropylene needle felt (ideal for kneeling or lying down) Easily remove dirt with a garden hose or by knocking it out Practically stowed - folds in the middle Unfolded 60cm*120cm in size Ultra tough product made from 100% recyclable polypropylene  

NOVISauto – B-Light / B-Light  is the ultra-bright lighting for your pick-up loading area made of 8 brightly lit LED units, each with 6 LED bulbs. B-Light fits all pickup trucks and models - B-Light brightly illuminates the entire cargo area of your pickup - There is only one switch for the whole light system. B light is suitable for all pickups with any cargo area covers or hardtop.  To protect against slipping loads, B-Light should be mounted under the U-rail on the side.

Saddlebag -  Tool storage bag for all pick-up holds, soft material The ultra-practical storage bag for tools, sporting goods and lots of small items for the driver's side of your pick-up The Novisauto saddlebag has been specially made for each open-rail pick-up bed and is mounted on the rails of selected bed covers for maximum compatibility. Alternatively, the stowage bag can also be attached to the inside edge of the cargo area using clamps. With some vehicles (e.g. Nissan Navara) the lashing system can also be used to attach the tool storage bag if the loading sill is covered. The Saddlebag consists of two loading levels. The lower level features a zip closure and exterior pockets. Heavy-duty inserts ensure lasting strength and a tailored appearance. Lift, take off and take away  in a single operation, always and at hand on every occasion. You take the saddlebag with you to your workplace - together with all inserted tools and assembly parts! In the platform, you fix the storage box to save space on the side between the platform flap and the wheel housing.   

CARRYBOY - aluminum cross member elliptical shape for mounting on all CARRYBOY hardtops with roof rails Length of the crossbars 125 cm Sturdy aluminum with a satin finish Including rubber insert Including attachments (matching feet) for the hardtop roof rails Can be attached to the hardtop without drilling When ordering, please name the built-in hardtop / cargo area roller blind - model The crossbars are ideal for attaching the CARRYBOY roof baskets - available in 5 different sizes.

NOVISauto - bed mat model BedMat in universal size for all common and non-common pickup models (also for special editions, extended vehicles) The NOVISAuto anti-slip pickup floor mat for the loading area is a perfect addition to your pickup. The anti-slip mat from NOVISAuto not only impresses with its properties as a non-slip accessory for the loading area, but also as an instrument for visually enhancing your loading area. The Bedmat is an integrated system made of permanently stable and durable materials. The surface of the anti-slip mat is covered with a comfortable but easy-care artificial carpet. This carpet provides the anti-slip properties and can be kept clean with a high-pressure cleaner or a hand brush. The base of the anti-slip mat for your pickup is made from 100% recycled polypropylene. The material is foamed and applied in 3 separate layers. In combination with the carpet surface, this ensures a unique protection factor against chemicals, dust & dirt, impacts and point loads. The padding and underlay also make work on the loading area easier. The surface prevents objects that are transported on the loading area from slipping. The NOVISAuto Bedmat model can be universally installed in all pickup vehicles. Perforations for US - full-size pickups (e.g. Dodge RAM, Ford F150) are already in place. For other less common vehicles, the mat can easily be cut to size with a sharpened box cutter. The dimensions of 170cm width and 250cm length allow installation in almost all pickup - loading areas. It can be installed either on a cargo area liner, on a spray coating or on the bare surface of the cargo floor. Appropriate adhesive pads with Velcro are included in the delivery. Ideally suited for extra cab or singlecab pickups (Toyota Hilux singlecab, VW Amarok singlecab, Ford Ranger singlecab, Ford Ranger extra cab, Toyota Hilux extra cab, Nissan Navara extra cab, Isuzu D-Max extra cab) or individual loading area extensions (e.g. by the company Veeth in the Netherlands ). universally applicable for all models Dimensionally stable, extremely hard-wearing and durable - therefore the best protection against scratches and damage to the loading area Protection against negative environmental influences (e.g. chemicals, acids, rust, etc.) easy to assemble - no drilling required in the vehicle platform ideally suited for an exceptionally long service life stable and easy to use continuous fabric between loading area and tailgate against unwanted deposits Anti-slip surface for safe transport This is the most innovative and unique load compartment liner there is. You get the look and comfort of a rug in an ultra-tough 100% polypropylene product. Thus, your loading area is not only protected against impacts and damage, but the bed liner also withstands stresses from gravel to battery acid.  

NOVISauto – SwingCase for Nissan Navara D23 NP300 / Renault Alaskan and Mercedes X-Class Pickup The ultra-practical box for tools, sporting goods and lots of small parts! You can reach your tools and small parts by effortlessly detaching your SwingCase box from the holder with just one movement and swiveling it towards you. No slouching or "bunk climbing"  is more needed! NOVISauto, the market leader in selling popular accessories for the 2016+ Nissan Navara D23 / Renault Alaskan and Mercedes X-Class, builds these versatile storage boxes from high-impact ABS hard plastic for your convenience - strong enough for a long Navara truck life. SwingCase is "tough", it is waterproof, space-saving and therefore ideally suited for your Nissan Navara / Alaskan and X-Class. - Purchasing two SwingCases for both sides of your Navara D23 NP300 Alaskan and the X-Class platform wall is the best choice - space-saving, absolutely tight and easy to handle! Raise, lift off and take with you in a single operation, always ready to hand on any occasion: You take the SwingCase with you to your construction site or workplace - together with all the packed tools and assembly parts!  SwingCase can be parked lying down or standing as usual. To save space, fix the SwingCase tool box on the side of the Nissan Navara between the platform door and the wheel housing. SwingCase for your Nissan Navara D23/ Renault Alaskan and Mercedes X-Class can be swung out and thus fills the previously unused platform space between the wheel housing and tailgate - adapted for every pick-up of all vehicle manufacturers, models and years of construction. The box can be locked with a rotary lock and permanently locked with a key. SwingCase is made of tough and durable ABS rigid plastic, strong enough to hold a weight of up to 34kg. The tool box is resistant to UV radiation and does not fade. In addition, the tool box can be secured to the vehicle with a small padlock. This locking device is already included in many new swing case storage box series. This means that it is no longer possible to remove the storage box from the Navara pickup. The tool box (tool box) and storage box is an essential Nissan Navara accessory for every tradesman or hobby - do-it-yourselfers. The initial installation takes only about 15 minutes with 6 self-tapping sheet metal screws. Please note that the swing case cannot be installed in combination with an extendable loading floor. In the case of Nissan Navara pick-ups with an inserted load compartment tub, this must be cut out in two places to ensure that the swing case tool box is held securely. This is the only way to ensure that the bracket fits perfectly on the vehicle.

Bedliner for Nissan Navara D23 and Renault Alaskan Double Cab from 2016 dimensionally stable, extremely hard-wearing and durable - therefore the best protection against scratches and damage to the loading area Optimum utilization of the loading area (directly adjacent to the side panel of the vehicle, therefore maximum loading width utilised) Protection against negative environmental influences (e.g. chemicals, acids, rust, etc.) precisely fitting and easy to assemble - no drilling required in the vehicle platform ideally suited for an exceptionally long service life including tailgate protection stable and easy to use for a variety of commercial uses made of durable polyethylene (HDPE) Economical in daily use, as it protects paintwork at low cost Made in the USA - no re-import from the Far East! Accesories Tailgate protection included assembly description including cut-out for lashing rails  

Load compartment liner over edge for Mercedes X-Class double cab 2018-2020 dimensionally stable, extremely hard-wearing and durable - therefore the best protection against scratches and damage to the loading area Protection against negative environmental influences (e.g. chemicals, acids, rust, etc.) precisely fitting and easy to assemble - no drilling required in the vehicle platform Including screw points for original lashing rails on the sides of the loading area ideally suited for an exceptionally long service life stable and easy to use for a variety of commercial uses made of durable polyethylene (HDPE) Economical in daily use, as it protects the paintwork at low cost Made in the USA - no re-import from the Far East. Accesories Tailgate protection with edge protection included assembly description with the necessary mounting accessories

Item No. CB-550x CARRYBOY - roof basket made of stainless steel, light and very stable aluminum with matching crossbars Available in 4 different sizes and 2 colors (silver or black): CB-550x-00    100*100cm CB-550x-01    100*120cm CB-550x-02    100*160cm CB-550x-03    100*130cm   The luggage rack can be mounted on most cars, SUVs, VANs, pickups, trucks and Carryboy hardtops with suitable fasteners (self-assembly is possible). - No drilling required! - Dimensionally stable, unbreakable and resilient - easy to assemble - do it yourself - - available in different dimensions - secure supply of spare parts The roof basket is supplied with crossbars and can be attached to the roof rails using the mounting kit supplied. Appropriate fasteners (roof racks) are required for attachment to SUVs and pickup truck cabs. If you have any questions, please contact us by telephone on 02151-393593 or by e-mail at info@carryboy.de Please ask for delivery times for additional sizes.

NOVISauto - load compartment liner, non-slip model BedRug BRNND16 for Nissan Navara NP300 Double Cab 2016+ Dimensionally stable, extremely hard-wearing and durable - therefore the best protection against scratches and damage to the loading area Protection against negative environmental influences (e.g. chemicals, acids, rust, etc.) precisely fitting and easy to assemble - no drilling required in the vehicle platform ideally suited for an exceptionally long service life it is stable and easy to use continuous fabric between loading area and tailgate against unwanted deposits Anti-slip surface for safe transport Protection of the tailgate hinges from granular loads and dust from above - reduces wear   This is the most innovative and unique load compartment liner there is. You get the look and comfort of a rug in an ultra-tough 100% polypropylene product. Thus, your loading area is not only protected against impacts and damage, but the bed liner also withstands stress from gravel to battery acid.  

Equip your pickup truck of any brand with an Elevate Rack crossbar from NOVISauto. Expand your storage space with accessories from the storage and transport solutions section. Our accessories adapt seamlessly to your vehicle. The assembly kit and installation instructions are included. If required, we can carry out the professional installation of the accessories ourselves. Our employees are technically skilled, professionally competent and practically experienced. Your NOVISauto accessories at a glance: For all brands of all years NOVISauto accessories manufactured by Realt Truck Truxedo Can be combined with load compartment covers with rail system or T-slot system More space, more joy - Elevate Rack crossbar system is an ideal storage and transport solution The Elevate Rack is a unique solution for your pickup truck. Expand your cargo space with raised crossbars at cab height. This means no cargo space is lost on the bed. On the contrary - new chances and opportunities arise. More cargo space, more room. We offer various accessories to optimise the loading options. Choose between a roof basket, kayak holder, load securing and lashing clamps. Our unique solution can be combined with load area covers. So don’t hesitate and use this unique product!

Carryboy - full bed pull-out shelf  -  Pull-out shelf cut out of aluminum checker plate according to the contour of the wheel housing This extendable loading floor is also available in combination with a drawer system in different sizes (CB-800). - Load capacity up to 350 kg! - Easy loading and unloading - you save time with it! - Non-slip, hard-wearing, easy-to-clean loading surface made of aluminum checker plate - best quality in processing and design - dimensionally stable, unbreakable and loadable up to approx. 350 kg - secure supply of spare parts - Simple assembly according to video and written assembly instructions - Convenient securing of the load with the integrated lashing eyes - The ball-bearing loading floor is unlocked with the handle - The loading area is almost completely filled - Wheel housings are cut out A notice:  these products are so-called selection products, which are individually manufactured to your order. This pull-out drawer is divided into S / M / L categories in terms of dimensions. Due to the rectangular shape, the loading floor fits on different vehicles. As an option, the loading floor can be fully adapted to the vehicle. The area of the accessory drawer is expanded to include the area behind the wheel arches. When ordering, please indicate the vehicle in question so that we can assign you the right vehicle. You can also choose between the pull-out loading floor in aluminum or covered with an anti-slip rubber coating.

CARRYBOY ROOF TENT CB-102-2P for all common pickups, SUVs and mid-size cars: Material:   Materials from the outside:   Oxford polyester with silver coating and UPF50+ (absorbs more than 98% of UV rays)   Material from inside:   190 g/sqm rip-stop polyester with PU 2000mm   Bottom material:          210 Denier Oxford Nylon with PU 2000mm Interior:   rust-free aluminum struts ensure structure and comfortable lying   6 cm foam mattress can be removed and cleaned    6 large windows with insect screens   2 shoe bags at the entrance - the dirt stays outside Comfort: Self-deploying within a few seconds using gas pressure springs spacious room for 2-3 people Protected against wind, weather and rain Foam mattress 6cm 2 extra shoe boxes Entry ladder can be extended by a maximum of 2m, fixed to the tent and foldable Fly screens in front of the windows Reliable UV protection tent size:   Unfolded & erected:           1,340 x 2,165 x 1,343mm   folded:             1,340 x 2,165 x 300mm   Weight:                               56 kg (together with ladder)    

Novisauto Pathfinder-1 roof tent The Novisauto roof tent for every pickup or at least mid-range SUV is one of the first innovative electrically controllable roof tents. You can straighten it up and down with a simple push of a button, alternatively you can also do it by hand. The tent is set up on the vehicle using clamps on cross members. Comfort : Self-erecting by remote control within 60 seconds Power supply via socket of the vehicle (3m cable) spacious interior with enough space for 2 people Reliable protection against wind and rain with extendable telescopic aluminum ladder - loadable up to 150kg with 6cm foam mattress. The cotton cover can be removed and washed. 2 extra hanging pockets for storing shoes, for example double fly screens in front of the windows and the entrance Tent size :   unfolded & erected (inside):      1,200(W) x 2,000(L) x 1,100(H) mm   Weight:                                       56 kg (together with ladder)   Material :   Material outside:   Oxford polyester with silver coating and UPF50+ *   Materials inside:   190 g/sqm ripstop polyester with 2000 mm water column   Bottom material:   210 Denier Oxford Nylon with 2000mm hydrostatic head Interior :   Stainless steel struts provide structure.   6 cm foam mattress can be removed with cover   6 windows with insect screen and privacy screen   2 additional shoe bags  

Carryboy - Slide Floor Universal  -  Pull-out shelf made of aluminum checker plate with a three-sided frame for all mid-size pickup trucks This extendable loading floor is also available in combination with a drawer system in different sizes (CB-800). - Load capacity up to 350 kg! - Easy loading and unloading - you save time with it! - Non-slip, hard-wearing, easy-to-clean loading surface made of aluminum checker plate - best quality in processing and design - dimensionally stable, unbreakable and loadable up to approx. 350 kg - secure supply of spare parts - Simple assembly according to video and written assembly instructions - Convenient securing of the load with the integrated lashing eyes - The ball-bearing loading floor is unlocked with the handle. A notice:  these products are so-called selection products, which are individually manufactured to your order. This pull-out drawer is divided into S / M / L categories in terms of dimensions. Due to the rectangular shape, the loading floor fits on different vehicles. As an option, the loading floor can be fully adapted to the vehicle. The area of the accessory drawer is expanded to include the area behind the wheel arches. The universal loading floor CB-778 is available as an accessory for these pickup vehicles with the following dimensions: Size S (1020*1380*208) - Toyota Hilux Revo, Isuzu Dmax, Mitsubishi L200, Fiat Fullback Size M (1080*1380*208) - Ford Ranger, Nissan Navara NP300, Renault Alaskan Size L (1200*1440*208) - VW Amarok Size XL - with the appropriate width, but 1700 mm length for single and extracab pickups. When ordering, please indicate the vehicle in question so that we can assign you the right vehicle. You can also choose between the pull-out loading floor in aluminum or covered with an anti-slip rubber coating.

Carryboy tool drawer model CB-800 Tool drawers and pull-out shelf with three-sided frame  for all European midsize pickups. (Ford Ranger, Nissan Navara, VW Amarok, Mercedes X, Mitsubishi L200, Renault Alaskan, Fiat Fullback, Toyota Hilux, Isuzu D-Max) - Load capacity of the pulled-out drawers/loading floor up to 100 kg! - Easy loading and unloading - you save time with it! - Non-slip, durable, easy-to-clean loading surface - best quality in processing and design - dimensionally stable, unbreakable and resilient - secure supply of spare parts - easy assembly - fits in every pick-up, depending on the size - Lockable drawers for extra security - recommended size for installation with hardtop - p

The basic version of the Huckepack camping pickup structure combines everything you need to experience a short adventure. Drive to the North Sea for the weekend and listen to the sound of the waves. How about a 4 to 5 day short trip to the Black Forest and enjoy the peace and quiet while the forest and nature embrace you?  Our motto "Freedom on wheels" is our motto. Enjoy the opportunity to go anywhere. Even the basic version is generously equipped and covers all your basic needs so that nothing stands in the way of your trip. The structure can be packed and unpacked quickly and easily - you can travel from one place to another in just a few minutes. The Aqualon tent provides reliable protection from wind and weather, allows light and solar heat to pass through - at the same time it is a tried and tested material from sailing ship construction. The main function of the basic version - a good night's sleep and good rest - is taken care of. A hammock and mattresses are included. The side, retractable entry ladder makes it easy to enter and exit the structure. Our high quality ensures a very long service life over several pickups. We only use the best materials such as stainless steel, use high-precision machines for perfect laser cutting and intelligent solutions such as a floor with water drainage. In addition, all exterior materials are powder-coated black and the interior is powder-coated gray. Of course, your safety should not be neglected. A fire extinguisher and a smoke and CO2 alarm are naturally included. Make your dreams come true and let there be no limits to your freedom!