Carryboy load compartment cover aluminum roller blind 789-MNDF
Fiat Fullback Double Cab 2016+
€2,250.00*
Available in 90 days
Delivery from April
Notes on purchase? Please enter here!
Product number: CB-789-S-MNDF
Product information "Carryboy load compartment cover aluminum roller blind 789-MNDF"
Carryboy roll cover aluminum roll cover CB-789-MNDF
for Fiat Fullback Double Cab 2016-2020
- Roller Lid - Alupanzer Aluminum roller blind rustproof and easy to use
- Roller cover can be ordered in black or silver
- Ergonomic, ribbed grip strip makes operation easier and ensures a good grip even in the rain
- with lock and key, also locks tailgate
- weatherproof and moisture resistant, no backwater
- Save up to 15% on fuel with Carryboy
- ideally suited for an exceptionally long service life
- Convenient pull tab ensures convenient operation
- for a variety of commercial uses
- Can be used with lower edge - load compartment tub
- detailed assembly description - assembly kit included
- only suitable without front protection grille, stainless steel bracket
The Rollerlid 789 for the Fiat Fullback Doublecab is an aluminum roller blind for retrofitting on your Fiat Fullback Doublecab. The flat roller blind, which ends flush with the loading sill, is attached to the vehicle using fastening rails. All required components are included in the scope of delivery. Permanent installation with a weld seam is recommended to ensure the best seal, but is not mandatory.
The aluminum roller blind from CARRYBOY for the Fiat Fullback double cab is available with slats in aluminum color or completely in matt black. The double-walled aluminum slats are each firmly connected with an articulated hinge with retracted seals. Due to the double-walled design of the individual slats, the roller blind is particularly robust and resilient. The ergonomic grip bar for operating the Fiat Fullback roller blind has a good grip thanks to the ribbing - even in wet weather!
The Rollerlid 789 for the fullback double cab is installed flat at the height of the loading sill. Rainwater that falls on the Fiat Fullback's cargo area is safely kept away from the cargo area via drain hoses on the roller blind box and on the tailgate. The CARRYBOY roller blind has a rotary lock with integrated locking hooks for the tailgate. The closure forms a unit with the tailgate of the Fiat Fullback double cab and is therefore a secure and flexible closure. The aluminum blind 789 is an attractive and flexible Fiat Fullback accessory.
Properties "Carryboy load compartment cover aluminum roller blind 789-MNDF"
| Assembly: | clamping bracket |
|---|---|
| Construction year: | 2017, 2018, 2019, 2020, 2021 |
| Make/Model: | Fiat Fullback |
| Variant - color slats: | Silver slats |
| ⓘ Cross arches/slats: | Aluminium |
| ⓘ Frame: | side rails |
| ⓘ Height above edge of cargo area: | on approx. inside edge line |
| ⓘ Latch and lock: | two-point-lock |
| ⓘ Loading area fully accessible: | yes |
| ⓘ Materials: | Aluminium |
| ⓘ Tension control: | automatic |
| ⓘ approximate assembly time: | 45-60 min |
| ⓘ control: | manual |
| ⓘ installation type: | fastening rails and clamps |
| ⓘ keep open while driving: | yes |
| ⓘ special feature: | Flat cover at the height of the loading area, versatile use |
| type of coverage: | Roll cover without bracket |
| Untertitel: | Fiat Fullback Double Cab 2016+ |
| Serie: | Aluminiumrollo 789 |
| Art der Abdeckung: | Rollcover ohne Bügel |
| Delivery Time: | approx. 1-4 weks |
Do you have any questions or need further information? Then please give us a call.
Expert advice by phone +49 (0) 2151-393593 or by e-mail: info@carryboy.de
Compare product
Image
Name
Carryboy load compartment cover aluminum roller blind 789-MNDF
Carryboy cargo area cover model GRX-MNDF
CARRYBOY load compartment cover with motor lift SMX-MNDF
Carryboy Soft Lid cargo area cover tarpaulin 743-MNDF
Carryboy Sport Lid model SX-MNDF
Link
Description
Carryboy roll cover aluminum roll cover CB-789-MNDF
for Fiat Fullback Double Cab 2016-2020
- Roller Lid - Alupanzer Aluminum roller blind rustproof and easy to use
- Roller cover can be ordered in black or silver
- Ergonomic, ribbed grip strip makes operation easier and ensures a good grip even in the rain
- with lock and key, also locks tailgate
- weatherproof and moisture resistant, no backwater
- Save up to 15% on fuel with Carryboy
- ideally suited for an exceptionally long service life
- Convenient pull tab ensures convenient operation
- for a variety of commercial uses
- Can be used with lower edge - load compartment tub
- detailed assembly description - assembly kit included
- only suitable without front protection grille, stainless steel bracket
The Rollerlid 789 for the Fiat Fullback Doublecab is an aluminum roller blind for retrofitting on your Fiat Fullback Doublecab. The flat roller blind, which ends flush with the loading sill, is attached to the vehicle using fastening rails. All required components are included in the scope of delivery. Permanent installation with a weld seam is recommended to ensure the best seal, but is not mandatory.
The aluminum roller blind from CARRYBOY for the Fiat Fullback double cab is available with slats in aluminum color or completely in matt black. The double-walled aluminum slats are each firmly connected with an articulated hinge with retracted seals. Due to the double-walled design of the individual slats, the roller blind is particularly robust and resilient. The ergonomic grip bar for operating the Fiat Fullback roller blind has a good grip thanks to the ribbing - even in wet weather!
The Rollerlid 789 for the fullback double cab is installed flat at the height of the loading sill. Rainwater that falls on the Fiat Fullback's cargo area is safely kept away from the cargo area via drain hoses on the roller blind box and on the tailgate. The CARRYBOY roller blind has a rotary lock with integrated locking hooks for the tailgate. The closure forms a unit with the tailgate of the Fiat Fullback double cab and is therefore a secure and flexible closure. The aluminum blind 789 is an attractive and flexible Fiat Fullback accessory.
CARRYBOY - Load compartment cover lid with bracket GRX-MNDF
for Fiat Fullback double cab from 2016
- with painted roll bar / protective bar with stainless steel inserts
- can be moved with ease, thanks to gas springs
- The cover is insensitive in robust, commercial use
- ideally suited for an exceptionally long service life
- Base material GRP, therefore particularly stable and easy to repair
- Offer in white primer, also available in body color
- securely lockable - two keys incl.
- locks the entire loading area
- Save up to 15% on fuel with CARRYBOY
- Can also be used with over-edge and under-edge load compartment tub
- detailed assembly description - assembly kit included
The GRX cargo area cover from CARRYBOY for the Fiat Fullback double cab from 2016 is a stylish, but at the same time functional cover. This Fiat Fullback accessory combines the appealing element of a painted tonneau cover with a polished stainless steel styling bar for contrast. The optimal mix for the most elegant design on the market!
The GRX flat cover for the Fiat Fullback double cab adapts seamlessly to the vehicle thanks to the paint finish in the vehicle color. The edges of the load compartment lid are curved over the edge of the vehicle. This ensures that the entire loading area is securely closed. All around seals lay on the cargo area of your vehicle and keep water and dust out of the cargo area. Rain flows freely over the lid on the edge of your Fiat Fullback double cab pickup.
The rotary lock with cylinder and set of keys enables the entire loading area to be locked securely. Since the GRX load compartment cover for the fullback is made in one piece together with the roll bar, there are no rattling parts, unnecessary points for water entry or unsightly seams.
The cargo area of your fullback double cab can be brightly lit with the lid! The integrated interior light with 2 rows of bright LED lights provides good lighting in the loading area. If this is still not sufficient, the loading space can be equipped with our lower edge light system Blight as a further Fiat Fullback accessory. The styling bar / roll bar of the cover is shaped in such a way that the 3rd brake light on the driver's cab is always reliably visible.
Be on the safe side with the GRX load compartment cover for the Fiat Fullback double cab from 2016. We guarantee you a secure supply of spare parts beyond the service range of the vehicle manufacturer.
CARRYBOY - load compartment cover Model SMX-MNDF
for Fiat Fullback Double Cab 2016-2019
- Two electric motors - semi-automatic operation
- Save up to 15% on fuel with CARRYBOY
- The cover is insensitive in robust use
- ideally suited for an exceptionally long service life
- it is stable and easy to use
- for a variety of commercial uses
- Paintwork in body color possible
- lockable - two keys incl.
Carryboy - Softlid 743 cargo area cover Vinyl tarpaulin with Velcro fastener
for Fiat Fullback double cab from year of construction 2016
- Cargo area tarpaulin - plastic-laminated, waterproof and robust
- Lateral drainage rails for rainwater - water is drained off via the tailgate
- weatherproof and moisture resistant
- The tarpaulin is attached with Velcro / can be driven open
- Save up to 15% on fuel with CARRYBOY
- ideally suited for an exceptionally long service life
- it is stable and easy to use
- for a variety of commercial uses
- detailed assembly description - assembly kit included
The CARRYBOY vinyl tarpaulin-type cargo area cover for the Fiat Fullback double cab combines ease of use with an unbeatable price-performance ratio. The cargo area tarpaulin for the Fiat Fullback pickup impresses with its elegant appearance and functionality.
The simple Velcro system of the vinyl tarpaulin for the Fiat Fullback double cab guarantees that the cargo area tarpaulin can be opened and closed quickly. Fastening straps with high-quality lightning fasteners reliably secure the tarpaulin for the loading area of the Fiat Fullback, so that it is also possible to drive with the tarpaulin open.
The surface of Carryboy's soft lid consists of a dark gray knobbed surface, which makes this vinyl tarpaulin for the Fiat Fullback pickup unmistakable. In addition, the tarpaulin provides effective protection against dust and water for your fullback pickup cargo area. All-round seals and a drainage system for rainwater keep this reliably away from the cargo area.
The Carryboy CB-743 soft lid for the Fiat Fullback double cab (2016+) can be combined with the current design of the loading area, which has remained unchanged since 2016 and beyond 2020. The different heights of the Fiat Fullback loading area are cleverly used for the installation of a rainwater drainage system. To do this, two black drain rails are attached directly to the sheet metal of the vehicle. Water that collects on the vinyl tarpaulin for the fullback is reliably drained away via the tailgate via these rails - this keeps the cargo area reliably dry.
Please note that the Carryboy Softlid CB-743 must be attached directly to the inner panel of the loading sill for installation. We recommend blind rivet nuts for this. As an alternative to shipping the tarpaulin, we also offer an on-site installation service.
* Please note: The original Mitsubishi L200 / Fiat Fullback load compartment liner with edge protection (MOPAR) requires additional, minor adjustments. For installation with a MOPAR liner, the clamped / screwed lashing eyes on the upper edge of the vehicle must be removed. The sloping edges of the loading tray at the front end of the loading area must be cut out. There is no vehicle sheet metal underneath these. Finally, the small "bulge" of the loading tray at the rear end just before the bend (in front of the tailgate) must be removed. All adjustments can be made in a short time with a milling cutter or Dremel, as well as an Allen key.
Carryboy Sportlid SX - Lid made of GRP adjustable with gas springs
for Fiat Fullback Double Cab 2016+
- can be moved with ease, thanks to gas springs.
- Save up to 15% on fuel with Carryboy
- The cover is insensitive in robust use
- ideally suited for an exceptionally long service life
- it is stable and easy to use
- for a variety of commercial uses
- Paintwork in body color possible
- lockable - two keys incl.
- The lid also closes the loading area at the same time
Price
€2,250.00*
€2,850.00*
€2,500.00*
€570.00*
€1,775.00*
Assembly
-
-
-
Construction year
Make/Model
Variant - color slats
-
-
-
-
ⓘ Cross arches/slats
-
-
-
-
ⓘ Frame
-
-
-
ⓘ Height above edge of cargo area
-
ⓘ Latch and lock
ⓘ Loading area fully accessible
-
-
-
ⓘ Materials
ⓘ Tension control
-
-
-
ⓘ approximate assembly time
ⓘ control
ⓘ installation type
-
ⓘ keep open while driving
-
-
-
ⓘ special feature
type of coverage
ⓘ color
-
-
ⓘ lockable
-
-
ⓘ particularly suitable for
-
cabin length vehicle
-
Variant - central locking
-
-
-
-
Variant - type of drive
-
-
-
-
ⓘ Surface finish
-
-
-
-
Zubehör
Only 2 available
Huckepack camping construction base for pickups
for all pickups
Camping Aufbau Level: Basisausstattung
The basic version of the Huckepack camping pickup structure combines everything you need to experience a short adventure. Drive to the North Sea for the weekend and listen to the sound of the waves. How about a 4 to 5 day short trip to the Black Forest and enjoy the peace and quiet while the forest and nature embrace you? Our motto "Freedom on wheels" is our motto. Enjoy the opportunity to go anywhere. Even the basic version is generously equipped and covers all your basic needs so that nothing stands in the way of your trip. The structure can be packed and unpacked quickly and easily - you can travel from one place to another in just a few minutes. The Aqualon tent provides reliable protection from wind and weather, allows light and solar heat to pass through - at the same time it is a tried and tested material from sailing ship construction. The main function of the basic version - a good night's sleep and good rest - is taken care of. A hammock and mattresses are included. The side, retractable entry ladder makes it easy to enter and exit the structure. Our high quality ensures a very long service life over several pickups. We only use the best materials such as stainless steel, use high-precision machines for perfect laser cutting and intelligent solutions such as a floor with water drainage. In addition, all exterior materials are powder-coated black and the interior is powder-coated gray. Of course, your safety should not be neglected. A fire extinguisher and a smoke and CO2 alarm are naturally included. Make your dreams come true and let there be no limits to your freedom!
Product number: SW10230.1
Price on request
Available in 90 days
Delivery from April
Care spray for tarpaulins - cargo area covers EX-TONNO TONIC
for all truck cargo area covers and tarpaulins
NOVISauto care spray "TONNO TONIC" for all luggage compartment covers and tarpaulins made of ABS hard plastic and vinyl. Tonno Tonic cares, cleans and gives your cover a fresh shine in a single step - it effectively protects against UV light. Tonno Tonic has been thoroughly tested and is 100% suitable for protecting all ABS hard plastic and vinyl covers. Remember to take care of your cover regularly! - she will thank you with a good, fresh appearance and a long life! Tonno Tonic protects against harsh weather, cold winter and hot summer days. For care, simply spray Tonno Tonic on the previously cleaned tarpaulin. Wipe the surface dry with a clean cloth. Feel free to use Tonno Tonic to clean your tires - please wait 5 minutes after spraying before you can wipe the tire surface dry. Your rims will not be damaged. Tonno Tonic is available in a 0.47 liter spray bottle or as a 6-pack for dealers.
Product number: EX-TONNO TONIC
€35.00*
Available in 90 days
Delivery from April
Only 3 available
NOVISauto EX-CCLEATS lashing clamps for all pickup models
for the pick-up platform
NOVISauto lashing clamps "CARGO CLEATS" - an ingeniously simple lashing system for your pickup loading box - installed in minutes ! the optimal alternative for backup of your transported goods! No drilling is required to attach the cleats anywhere on the top edge of the cargo box side walls. No damage to paint or sheet metal during installation and under load. The cleats are made of plastic-coated glass, so they are extremely durable and will not rust. Loads of up to around 200 kg are possible and can also be used for most of our luggage compartment covers. Additional CARGO CLEADS are required for larger loads: always use more CARGO CLEATS to secure your cargo than necessary! - - Sold in pairs, information on attachment and application options, such as tips for knotting, for optimal loading is included. To note: CARGO CLEATS cannot be used with load compartment tubs that are over the edge (overrail tubs) - unless the tub is cut out at the relevant attachment points. CARGO CLEATS is not suitable for plastic-coated cargo boxes.
Product number: EX-CCLEATS
€42.25*
Available in 90 days
Delivery from April
NOVISauto joint sealing tape model MA sealing tape
between hardtop and pick-up platform - all brands - all models - all years of construction
NOVISauto - pre-compressed, permanently elastic joint sealing tape for sealing the joint between the hard top or load compartment cover and the vehicle load box. Seals reliably with joint widths between 4 mm and 9 mm when expanded. The foam rubber is placed on the cleaned bottom edge of the upright hard top / tonneau cover glued on, previously trimmed a little at the ends. Then the hard top / cargo area cover is carefully aligned on the upper edge of the vehicle cargo box and fixed using the existing aluminum clamps. A detailed assembly description is enclosed with the delivery.
Product number: MA-Dichtband
€58.00*
Available in 90 days
Delivery from April
Tailgate Seal MAX-SEAL - Dust and splash protection
seals, keeps dust, rain and snow out of your truck bed
NOVISAUTO pickup tailgate seal MAXSEAL for all common EU and US pickup vehicles: NOVISauto tailgate seal "MAX SEAL" keeps your pickup loading area free from dust, rain and snow - this EPDM sealing tape (ethylene propylene diene) is a foil-shaped, synthetic rubber, a material according to DIN EN 13956 that is often used for roof and facade seals, used for pond sealing. The tailgate seal MAX - SEAL is up to 500% stretchable, permanently elastic (even at temperatures between -40 degrees Celsius and +120 degrees) and has a life expectancy of decades. The MAX - SEAL tailgate seals are resistant to aging and ozone without additional surface protection. They are UV and IR stable and resistant to a variety of chemical media. (Source: from Wikipedia). Max Seal is easy to install in minutes using a do-it-yourself method - simply cut and glue the ends! - The band is long enough and suitable for all pickup trucks with a tonneau cover or hard top. Equip your pickup with a tailgate seal from CARRYBOY / NOVISAUTO. This means that water and dust no longer have any chance of entering the pickup cargo area. The easy, quick and convenient way to seal your tailgate yourself.
Product number: MAX-SEAL
€67.50*
Available in 90 days
Delivery from April
Only 8 available
NOVISauto workshop mat / gardening mat padded and waterproof
Work mat for everyday use
NOVISauto - knee-friendly anti-slip mat, padded and insulated for workshop or garden work VERSATILE USE - Work mat for professional or DIY needs dimensionally stable, extremely hard-wearing and durable Generous foaming - therefore well padded and insulated towards the bottom Waterproof and quick drying Comfortable non-slip surface with coarse polypropylene needle felt (ideal for kneeling or lying down) Easily remove dirt with a garden hose or by knocking it out Practically stowed - folds in the middle Unfolded 60cm*120cm in size Ultra tough product made from 100% recyclable polypropylene
Product number: BR-TW2x4MAT
€70.00*
Available in 90 days
Delivery from April
Pickup storage bag Saddlebag cargo area driver's side
for all pickup vehicles
Saddlebag - Tool storage bag for all pick-up holds, soft material The ultra-practical storage bag for tools, sporting goods and lots of small items for the driver's side of your pick-up The Novisauto saddlebag has been specially made for each open-rail pick-up bed and is mounted on the rails of selected bed covers for maximum compatibility. Alternatively, the stowage bag can also be attached to the inside edge of the cargo area using clamps. With some vehicles (e.g. Nissan Navara) the lashing system can also be used to attach the tool storage bag if the loading sill is covered. The Saddlebag consists of two loading levels. The lower level features a zip closure and exterior pockets. Heavy-duty inserts ensure lasting strength and a tailored appearance. Lift, take off and take away in a single operation, always and at hand on every occasion. You take the saddlebag with you to your workplace - together with all inserted tools and assembly parts! In the platform, you fix the storage box to save space on the side between the platform flap and the wheel housing.
Product number: TX-SADDLEBAG
€140.00*
Available in 90 days
Delivery from April
Only 4 available
Carryboy SlingUp model CB-777-MN tailgate cable
Tailgate cable for Mitsubishi L200 / Fiat Fullback from year 2015
The innovative Carryboy tailgate cable tailgate spring simplifies opening and closing the tailgate of your pick-up! The slingup helps you open and close the tailgate. The spring system dampens the downward movement of the tailgate. When closing the pickup tailgate of the Mitsubishi L200 / Fiat Fullback, this traction is used again. You will notice significant cushioning in both the up and down movement. The damping can be continuously adjusted as required. The slingup for the Mitsubishi L200 / Fiat Fullback is available for all vehicle lengths. The installation takes place without drilling and is also possible in combination with a load compartment tub. With the help of the assembly parts supplied, assembly is successfully completed in just a few minutes. The tailgate damper can be combined with a variety of other pickup accessories. If necessary, please inquire in advance.
Product number: CB-777-MN
€155.00*
Available in 90 days
Delivery from April
Only 3 available
CARRYBOY cross member model 558
for all Carryboy hardtops
CARRYBOY - aluminum cross member elliptical shape for mounting on all CARRYBOY hardtops with roof rails Length of the crossbars 125 cm Sturdy aluminum with a satin finish Including rubber insert Including attachments (matching feet) for the hardtop roof rails Can be attached to the hardtop without drilling When ordering, please name the built-in hardtop / cargo area roller blind - model The crossbars are ideal for attaching the CARRYBOY roof baskets - available in 5 different sizes.
Product number: CB-558-00
€275.00*
Available in 90 days
Delivery from April
Only 5 available
NOVISauto padded anti-slip mat BEDMAT - can be cut to size universal size 250cm*170cm
for all pickup vehicles
NOVISauto - bed mat model BedMat in universal size for all common and non-common pickup models (also for special editions, extended vehicles) The NOVISAuto anti-slip pickup floor mat for the loading area is a perfect addition to your pickup. The anti-slip mat from NOVISAuto not only impresses with its properties as a non-slip accessory for the loading area, but also as an instrument for visually enhancing your loading area. The Bedmat is an integrated system made of permanently stable and durable materials. The surface of the anti-slip mat is covered with a comfortable but easy-care artificial carpet. This carpet provides the anti-slip properties and can be kept clean with a high-pressure cleaner or a hand brush. The base of the anti-slip mat for your pickup is made from 100% recycled polypropylene. The material is foamed and applied in 3 separate layers. In combination with the carpet surface, this ensures a unique protection factor against chemicals, dust & dirt, impacts and point loads. The padding and underlay also make work on the loading area easier. The surface prevents objects that are transported on the loading area from slipping. The NOVISAuto Bedmat model can be universally installed in all pickup vehicles. Perforations for US - full-size pickups (e.g. Dodge RAM, Ford F150) are already in place. For other less common vehicles, the mat can easily be cut to size with a sharpened box cutter. The dimensions of 170cm width and 250cm length allow installation in almost all pickup - loading areas. It can be installed either on a cargo area liner, on a spray coating or on the bare surface of the cargo floor. Appropriate adhesive pads with Velcro are included in the delivery. Ideally suited for extra cab or singlecab pickups (Toyota Hilux singlecab, VW Amarok singlecab, Ford Ranger singlecab, Ford Ranger extra cab, Toyota Hilux extra cab, Nissan Navara extra cab, Isuzu D-Max extra cab) or individual loading area extensions (e.g. by the company Veeth in the Netherlands ). universally applicable for all models Dimensionally stable, extremely hard-wearing and durable - therefore the best protection against scratches and damage to the loading area Protection against negative environmental influences (e.g. chemicals, acids, rust, etc.) easy to assemble - no drilling required in the vehicle platform ideally suited for an exceptionally long service life stable and easy to use continuous fabric between loading area and tailgate against unwanted deposits Anti-slip surface for safe transport This is the most innovative and unique load compartment liner there is. You get the look and comfort of a rug in an ultra-tough 100% polypropylene product. Thus, your loading area is not only protected against impacts and damage, but the bed liner also withstands stresses from gravel to battery acid.
Product number: BR-BMX00D
€375.00*
Available in 90 days
Delivery from April
Only 1 available
CARRYBOY roof basket model CB-550x-00
made of aluminium
Item No. CB-550x CARRYBOY - roof basket made of stainless steel, light and very stable aluminum with matching crossbars Available in 4 different sizes and 2 colors (silver or black): CB-550x-00 100*100cm CB-550x-01 100*120cm CB-550x-02 100*160cm CB-550x-03 100*130cm The luggage rack can be mounted on most cars, SUVs, VANs, pickups, trucks and Carryboy hardtops with suitable fasteners (self-assembly is possible). - No drilling required! - Dimensionally stable, unbreakable and resilient - easy to assemble - do it yourself - - available in different dimensions - secure supply of spare parts The roof basket is supplied with crossbars and can be attached to the roof rails using the mounting kit supplied. Appropriate fasteners (roof racks) are required for attachment to SUVs and pickup truck cabs. If you have any questions, please contact us by telephone on 02151-393593 or by e-mail at info@carryboy.de Please ask for delivery times for additional sizes.
Product number: GR-5934048T
€750.00*
Available in 90 days
Delivery from April
Only 2 available
NOVISauto trunk tub anti-slip and padded BRMD16
Mitsubishi L200 / Fiat Fullback double cab from year 2016+
NOVISauto - load compartment liner, non-slip model BedRug BRMD16 for Mitsubishi L200 and Fiat Fullback 2015+ double cab Dimensionally stable, extremely hard-wearing and durable - therefore the best protection against scratches and damage to the loading area Protection against negative environmental influences (e.g. chemicals, acids, rust, etc.) precisely fitting and easy to assemble - no drilling required in the vehicle platform ideally suited for an exceptionally long service life it is stable and easy to use continuous fabric between loading area and tailgate against unwanted deposits Anti-slip surface for safe transport Protection of the tailgate hinges from granular loads and dust from above - reduces wear The innovative and unique bedliner for your Mitsubishi L200 double cab pickup. You get the look and comfort of a rug in an ultra-tough 100% polypropylene product. Thus, your loading area is not only protected against impacts and damage, but the bed liner also withstands stress from gravel to battery acid.
Product number: BR-BRM16DCK
€825.00*
Available in 90 days
Delivery from April
Only 2 available
Tip
Crossbar system increases ELEVATE RACK FS
for all pickup trucks
Variante - Modell: Elevate Rack CS - Midsize EU Trucks
Equip your pickup truck of any brand with an Elevate Rack crossbar from NOVISauto. Expand your storage space with accessories from the storage and transport solutions section. Our accessories adapt seamlessly to your vehicle. The assembly kit and installation instructions are included. If required, we can carry out the professional installation of the accessories ourselves. Our employees are technically skilled, professionally competent and practically experienced. Your NOVISauto accessories at a glance: For all brands of all years NOVISauto accessories manufactured by Realt Truck Truxedo Can be combined with load compartment covers with rail system or T-slot system More space, more joy - Elevate Rack crossbar system is an ideal storage and transport solution The Elevate Rack is a unique solution for your pickup truck. Expand your cargo space with raised crossbars at cab height. This means no cargo space is lost on the bed. On the contrary - new chances and opportunities arise. More cargo space, more room. We offer various accessories to optimise the loading options. Choose between a roof basket, kayak holder, load securing and lashing clamps. Our unique solution can be combined with load area covers. So don’t hesitate and use this unique product!
Product number: TX-1118513
€1,395.00*
Available in 90 days
Delivery from April
Only 1 available
CARRYBOY loading floor pull-out rectangular 350kg double cab Ranger / Navara €1,700.00*
for all EU pickups and loading area lengths (selectable)
Dimensions: M (UNIV.) - Ranger / Navara double cab
Carryboy - Slide Floor Universal - Pull-out shelf made of aluminum checker plate with a three-sided frame for all mid-size pickup trucks This extendable loading floor is also available in combination with a drawer system in different sizes (CB-800). - Load capacity up to 350 kg! - Easy loading and unloading - you save time with it! - Non-slip, hard-wearing, easy-to-clean loading surface made of aluminum checker plate - best quality in processing and design - dimensionally stable, unbreakable and loadable up to approx. 350 kg - secure supply of spare parts - Simple assembly according to video and written assembly instructions - Convenient securing of the load with the integrated lashing eyes - The ball-bearing loading floor is unlocked with the handle. A notice: these products are so-called selection products, which are individually manufactured to your order. This pull-out drawer is divided into S / M / L categories in terms of dimensions. Due to the rectangular shape, the loading floor fits on different vehicles. As an option, the loading floor can be fully adapted to the vehicle. The area of the accessory drawer is expanded to include the area behind the wheel arches. The universal loading floor CB-778 is available as an accessory for these pickup vehicles with the following dimensions: Size S (1020*1380*208) - Toyota Hilux Revo, Isuzu Dmax, Mitsubishi L200, Fiat Fullback Size M (1080*1380*208) - Ford Ranger, Nissan Navara NP300, Renault Alaskan Size L (1200*1440*208) - VW Amarok Size XL - with the appropriate width, but 1700 mm length for single and extracab pickups. When ordering, please indicate the vehicle in question so that we can assign you the right vehicle. You can also choose between the pull-out loading floor in aluminum or covered with an anti-slip rubber coating.
Product number: CB-778-00-A
Variants from €1,675.00*
Available in 90 days
Delivery from April
Only 1 available
CARRYBOY loading floor pull-out rectangular 350kg
for all EU pickups and loading area lengths (selectable)
Carryboy - Slide Floor Universal - Pull-out shelf made of aluminum checker plate with a three-sided frame for all mid-size pickup trucks This extendable loading floor is also available in combination with a drawer system in different sizes (CB-800). - Load capacity up to 350 kg! - Easy loading and unloading - you save time with it! - Non-slip, hard-wearing, easy-to-clean loading surface made of aluminum checker plate - best quality in processing and design - dimensionally stable, unbreakable and loadable up to approx. 350 kg - secure supply of spare parts - Simple assembly according to video and written assembly instructions - Convenient securing of the load with the integrated lashing eyes - The ball-bearing loading floor is unlocked with the handle. A notice: these products are so-called selection products, which are individually manufactured to your order. This pull-out drawer is divided into S / M / L categories in terms of dimensions. Due to the rectangular shape, the loading floor fits on different vehicles. As an option, the loading floor can be fully adapted to the vehicle. The area of the accessory drawer is expanded to include the area behind the wheel arches. The universal loading floor CB-778 is available as an accessory for these pickup vehicles with the following dimensions: Size S (1020*1380*208) - Toyota Hilux Revo, Isuzu Dmax, Mitsubishi L200, Fiat Fullback Size M (1080*1380*208) - Ford Ranger, Nissan Navara NP300, Renault Alaskan Size L (1200*1440*208) - VW Amarok Size XL - with the appropriate width, but 1700 mm length for single and extracab pickups. When ordering, please indicate the vehicle in question so that we can assign you the right vehicle. You can also choose between the pull-out loading floor in aluminum or covered with an anti-slip rubber coating.
Product number: CB-778-01
€1,700.00*
Available in 90 days
Delivery from April
Only 1 available
Carryboy roof tent for 2-3 people Series 1
Roof tent 2-3 people for mid-size / pickup / SUV
CARRYBOY ROOF TENT CB-102-2P for all common pickups, SUVs and mid-size cars: Material: Materials from the outside: Oxford polyester with silver coating and UPF50+ (absorbs more than 98% of UV rays) Material from inside: 190 g/sqm rip-stop polyester with PU 2000mm Bottom material: 210 Denier Oxford Nylon with PU 2000mm Interior: rust-free aluminum struts ensure structure and comfortable lying 6 cm foam mattress can be removed and cleaned 6 large windows with insect screens 2 shoe bags at the entrance - the dirt stays outside Comfort: Self-deploying within a few seconds using gas pressure springs spacious room for 2-3 people Protected against wind, weather and rain Foam mattress 6cm 2 extra shoe boxes Entry ladder can be extended by a maximum of 2m, fixed to the tent and foldable Fly screens in front of the windows Reliable UV protection tent size: Unfolded & erected: 1,340 x 2,165 x 1,343mm folded: 1,340 x 2,165 x 300mm Weight: 56 kg (together with ladder)
Product number: CB-102-2P
€1,760.00*
Available in 90 days
Delivery from April
Only 2 available
Roof tent Pathfinder-1
Electric roof tent 2-3 people for mid-size / pickup / SUV
Novisauto Pathfinder-1 roof tent The Novisauto roof tent for every pickup or at least mid-range SUV is one of the first innovative electrically controllable roof tents. You can straighten it up and down with a simple push of a button, alternatively you can also do it by hand. The tent is set up on the vehicle using clamps on cross members. Comfort : Self-erecting by remote control within 60 seconds Power supply via socket of the vehicle (3m cable) spacious interior with enough space for 2 people Reliable protection against wind and rain with extendable telescopic aluminum ladder - loadable up to 150kg with 6cm foam mattress. The cotton cover can be removed and washed. 2 extra hanging pockets for storing shoes, for example double fly screens in front of the windows and the entrance Tent size : unfolded & erected (inside): 1,200(W) x 2,000(L) x 1,100(H) mm Weight: 56 kg (together with ladder) Material : Material outside: Oxford polyester with silver coating and UPF50+ * Materials inside: 190 g/sqm ripstop polyester with 2000 mm water column Bottom material: 210 Denier Oxford Nylon with 2000mm hydrostatic head Interior : Stainless steel struts provide structure. 6 cm foam mattress can be removed with cover 6 windows with insect screen and privacy screen 2 additional shoe bags
Product number: CB-102-H1
€1,810.00*
Available in 90 days
Delivery from April
Only 1 available
Carryboy tool drawers with loading floor CB-800 €2,625.00*
for double cab pickups
Dimensions: M - Middle drawer | Variant - base: Anti slip rubber
Carryboy tool drawer model CB-800 Tool drawers and pull-out shelf with three-sided frame for all European midsize pickups. (Ford Ranger, Nissan Navara, VW Amarok, Mercedes X, Mitsubishi L200, Renault Alaskan, Fiat Fullback, Toyota Hilux, Isuzu D-Max) - Load capacity of the pulled-out drawers/loading floor up to 100 kg! - Easy loading and unloading - you save time with it! - Non-slip, durable, easy-to-clean loading surface - best quality in processing and design - dimensionally stable, unbreakable and resilient - secure supply of spare parts - easy assembly - fits in every pick-up, depending on the size - Lockable drawers for extra security - recommended size for installation with hardtop - p
Product number: CB-800-M-R-00
Variants from €2,525.00*
Available in 90 days
Delivery from April
Alternative: Hardtops
Carryboy Hardtop with hinged window SO-MNDF
Fiat Fullback Double Cab 2016-2020
Variant - Hardtop version: SO - standard design | Variant - central locking: Without central locking
Carryboy hardtop model SO with tinted folding windows on the side for Fiat Fullback double cab 2016-2020 - available in all body colors side tinted folding windows Tinted all-glass rear door with heating Slidable bow window the tailgate can be opened from the inside Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manual adjustable Automatic on/off switch when opening/closing the tailgate when you close the hardtop rear door, you also close the platform hatch the black one Roof rails have been tested with a load capacity of 80 kg Spoiler with 3rd brake light Hinges in stainless steel Mounting kit and description are included in the delivery
Product number: SO-MNDF
€3,350.00*
Available in 90 days
Delivery from April
Carryboy Hardtop with hinged window SON-MNDF
Fiat Fullback Double Cab 2016-2020
Variant - Hardtop version: SON - New design without spoilers | Variant - central locking: Without central locking
Carryboy hardtop model SON with tinted folding windows on the side for Fiat Fullback double cab - available in all body colors side tinted folding windows Tinted all-glass rear door with heating Slidable bow window the tailgate can be opened from the inside Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manual adjustable Automatic on/off switch when opening/closing the tailgate when you close the hardtop rear door, you also close the platform hatch the black one, detachable) Roof rails have been tested with a load capacity of 80 kg Spoiler with 3rd brake light Hinges in stainless steel Mounting kit and description are included in the delivery
Product number: SO(N)-MNDF
€3,350.00*
Available in 90 days
Delivery from April
CARRYBOY hardtop with folding window, sliding window and central locking SO56(R)-MNDF €3,438.01*
Fiat Fullback Double Cab 2015-2020
Variant - central locking: With central locking
Carryboy hardtop model SO56 a side tinted folding window and a sliding window for Fiat Fullback Double Cab 2016-2019 - available in all body colors side tinted hinged window side tinted sliding window Bow sliding window Tinted all-glass rear door the tailgate can be opened from the inside Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manual adjustable Automatic on/off switch when opening/closing the tailgate when you close the hardtop rear door, you also close the platform hatch the black one, detachable) Roof rails have been tested with a load capacity of 60 kg Spoiler with 3rd brake light Hinges in stainless steel Mounting kit and description are included in the delivery
Product number: SO56(R)-MNDF
Variants from €3,200.01*
Available in 90 days
Delivery from April
Carryboy Hardtop with hinged window S6-MNDF
Fiat Fullback double cab from year 2016+
Variant - central locking: Without central locking
CARRYBOY hardtop model S6 with side tinted vent windows for Fiat Fullback from year of construction 2017 double cab - available in all body colors Side tinted vent windows Tinted all-glass rear door the tailgate can also be opened from the inside Roof lining made of robust, close-meshed black-grey woven fabric No vinyl!!! and therefore no risk of mold stains, easy to clean and repair Interior lamp 3-fold manually adjustable from the inside Automatic on/off switch when opening/closing the tailgate. When you close the hardtop rear door, you also lock the platform hatch Aluminum roof rails, removable - tested to 80 kg for additional loading capacity Stainless steel hinges Mounting kit and description included
Product number: S6-MNDF
€3,350.00*
Available in 90 days
Delivery from April
Carryboy hardtop with side flaps WM-MNDF
Fiat Fullback Double Cab year 2015-2020
Variant - central locking: Without central locking
One of our BEST! our Carryboy professional hardtop model WM-Workman, finished in universal white - but also available in any other color for your new Fiat Fullback double cab. Carryboy's robust first-class professional hardtop! for Crafts, trade, technology, sports, leisure and public sector, an ideal hardtop for the vehicle fleet! bow sliding window for maximum convenience in loading and unloading available in universal white (painted finish - top coat is clear coat) also available in all vehicle colors from the world market leader Carryboy side GfK flaps Tinted all-glass rear door lockable rear door the tailgate can be opened from the inside Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manual adjustable Automatic on/off switch when opening/closing the tailgate when you close the hardtop rear door, you also close the platform hatch Hinges in stainless steel Mounting kit and description are included in the delivery
Product number: WM-MNDF
€3,600.00*
Available in 90 days
Delivery from April
Carryboy hardtop with sliding window 560-MNDF
Fiat Fullback Double Cab 2016+
Variant - central locking: Without central locking
Carryboy hardtop model 560 with tinted sliding windows on the side for Fiat Fullback double cab 2016-2019 - available in all body colors. Side tinted sliding windows bow window Bow sliding window optionally available (additional costs) Tinted all-glass rear door the tailgate can be opened from the inside Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manual adjustable Automatic on/off switch when opening/closing the tailgate when you close the hardtop rear door, you also close the platform hatch the black one, detachable) Roof rails have been tested with a load capacity of 80 kg Spoiler with 3rd brake light Hinges in stainless steel Mounting kit and description are included in the delivery
Product number: 560-MNDF
€3,075.00*
Available in 90 days
Delivery from April
Carryboy Hardtop without side window 560oS-MNDF
Fiat Fullback Double Cab Bj. 2016+
Variant - central locking: Without central locking
Carryboy hardtop model 560 without side windows Accessory for Fiat Fullback double cab - available in all body colors. without side window bow window Bow sliding window optionally available (additional costs) 2-component primer Tinted all-glass rear door the tailgate can be opened from the inside Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manual adjustable Automatic on/off switch when opening/closing the tailgate when you close the hardtop rear door, you also close the platform hatch the black, removable roof rails have been tested with a load capacity of 80 kg Spoiler with 3rd brake light Hinges in stainless steel Mounting kit and description are included in the delivery
Product number: 560oS-MNDF
€2,899.99*
Available in 90 days
Delivery from April
Alternative: Fahrgestellaufbauten
Carryboy Chassis Body Aluminum Tray Model CB-790-00
for all common pickups -- double cab
Carryboy chassis body Aluminum tray model the perfect service structure on your pickup chassis Standard version: powder coated steel brackets roll bar in front Floor made of non-slip aluminum profiles integrated dirt trap Aluminum rear light guard (optional) All aluminum construction flap safety relatively easy assembly nevertheless: we recommend assembly by a body shop Mounting kit included Secured supply of spare parts from the "Authorized Dealer" (Carryboy Germany). We prefer collection by our customers, but we are also happy to deliver as a kit, protected in professional packaging in a wooden frame in outer packaging at an attractive delivery price - please ask about the freight costs.
Product number: CB-790-00
Price on request
Available in 90 days
Delivery from April
Carryboy chassis body model CSV-MNDF
Fiat Fullback double cab from year 2016+
Carryboy chassis body CSV Tradesman model - the perfect service structure on your pickup chassis of your Fiat Fullback double cab - available in all body colors. Standard version: - Standard universal white - galvanized chassis substructure - 3-sided apron made of GfK fiberglass - Base plate made of non-slip aluminum checker plate - Roof lining made of robust, easy-care woven fabric - three LED interior lights - 3rd brake light (LED) - Stabilus gas shock absorbers - rear bumper made of high quality stainless steel - Rear lights protected by stainless steel protective grilles - detailed assembly description - relatively easy assembly (initial assembly 1 man day), nevertheless: we recommend assembly by a body shop - Mounting kit included Secured supply of spare parts from the "authorized dealer" (Carryboy Germany). In addition, on request, the complete interior equipment with storage compartments and shelves to secure your tools, equipment and load (according to separate offer) see accessories. We prefer collection by our customer, but we also deliver protected in wooden frame at an attractive delivery price - please ask for the freight costs. Of course, assembly at our location is also possible. You provide us with your vehicle, or we will supply you with the fully assembled vehicle with CSV structure! - Please contact us, we will be happy to advise you.
Product number: CSV-MNDF
Price on request
Available in 90 days
Delivery from April
