NOVISauto cargo area liner Ranger Singlecab - RLFRL12

• dimensionally stable, extremely hard-wearing and durable - therefore the best protection against scratches
  and damage to the loading area
• Optimum use of the loading area (less clumsy than the original Ranger tub - behind the tailgate directly on the side panel of the vehicle, therefore the maximum loading width is used)
• including upper edge protection of the tailgate
• Only suitable for vehicles without side rail lashing system, cut-outs for lashing hooks are available
  
• Protection against negative environmental influences (e.g. chemicals, acids, rust, etc.)
• precisely fitting and easy to assemble - no drilling required in the vehicle platform
• ideally suited for an exceptionally long service life
• stable and easy to use
• for a variety of commercial uses
• made of durable polyethylene (HDPE)
• Economical in daily use, as it protects paintwork at low cost
• Made in the USA - no re-import from the Far East!
  

Accesories

• Tailgate protection with edge protection included
• assembly description
• with the necessary mounting accessories

Effectively and inexpensively protect the scratch-prone upper edge of the tailgate of your 2010-2020 Ford Ranger!

The NOVISAuto protective strip for the Ford Ranger tailgate offers long-lasting and very effective protection against scratches in the paintwork. Ideally suited if you already have a built-in loading space liner without edge protection or if the loading space is protected with a coating - because the edges of the loading area are still unprotected with both systems!

The protective cap / rubbing strip for the Ford Ranger tailgate was developed for lasting protection against scratches, dents and dents. A close fit with smooth machined edges and durable plastic material make our Ford Ranger Edge Cover Moldings an excellent addition to your vehicle. The thickness of the edge protection is 3mm, up to 4mm in particularly stressed areas.

The NOVISAuto Bushwacker protective strip is made of high-quality DURA-FLEX 2000 plastic. This plastic is very durable, impact and scratch-resistant and designed for all seasons. Harmful sun rays cannot harm your plastic edge protection, because the material does not fade. The surface is visually and haptically appealing with a slightly rough black surface.

NOVISauto care spray "TONNO TONIC"  for all luggage compartment covers and tarpaulins made of ABS hard plastic and vinyl.

Tonno Tonic cares, cleans and gives your cover a fresh shine in a single step -  it effectively protects against UV light. Tonno Tonic has been thoroughly tested and is 100% suitable for protecting all ABS hard plastic and vinyl covers.  Remember to take care of your cover regularly!  - she will thank you with a good, fresh appearance and a long life! Tonno Tonic protects against harsh weather, cold winter and hot summer days.

For care, simply spray Tonno Tonic on the previously cleaned tarpaulin. Wipe the surface dry with a clean cloth. Feel free to use Tonno Tonic to clean your tires - please wait 5 minutes after spraying before you can wipe the tire surface dry. Your rims will not be damaged.

Tonno Tonic is available in a 0.47 liter spray bottle or as a 6-pack for dealers.

CARRYBOY tailgate damper CB-111 on Stabilus - shock absorber base for Ford Ranger 2012+

CARRYBOY - aluminum cross member elliptical shape

for mounting on all CARRYBOY hardtops with roof rails

• Length of the crossbars 125 cm
• Sturdy aluminum with a satin finish
• Including rubber insert
• Including attachments (matching feet) for the hardtop roof rails
• Can be attached to the hardtop without drilling

The crossbars are ideal for attaching the CARRYBOY roof baskets - available in 5 different sizes.

CARRYBOY - aluminum cross member elliptical shape

for mounting on all CARRYBOY hardtops with roof rails

• Length of the crossbars 125 cm
• Sturdy aluminum with a satin finish
• Including rubber insert
• Including attachments (matching feet) for the hardtop roof rails
• Can be attached to the hardtop without drilling

The crossbars are ideal for attaching the CARRYBOY roof baskets - available in 5 different sizes.

This extendable loading floor is also available in combination with a drawer system in different sizes (CB-800).

- Easy loading and unloading - you save time with it!
- Non-slip, hard-wearing, easy-to-clean loading surface made of aluminum checker plate
- best quality in processing and design
- dimensionally stable, unbreakable and loadable up to approx. 350 kg
- secure supply of spare parts
- Simple assembly according to video and written assembly instructions
- Convenient securing of the load with the integrated lashing eyes
- The ball-bearing loading floor is unlocked with the handle.

A notice:  these products are so-called selection products, which are individually manufactured to your order. This pull-out drawer is divided into S / M / L categories in terms of dimensions. Due to the rectangular shape, the loading floor fits on different vehicles. As an option, the loading floor can be fully adapted to the vehicle. The area of the accessory drawer is expanded to include the area behind the wheel arches.

The universal loading floor CB-778 is available as an accessory for these pickup vehicles with the following dimensions:

• Size S (1020*1380*208) - Toyota Hilux Revo, Isuzu Dmax, Mitsubishi L200, Fiat Fullback
• Size M (1080*1380*208) - Ford Ranger, Nissan Navara NP300, Renault Alaskan
• Size L (1200*1440*208) - VW Amarok
• Size XL - with the appropriate width, but 1700 mm length for single and extracab pickups.

When ordering, please indicate the vehicle in question so that we can assign you the right vehicle. You can also choose between the pull-out loading floor in aluminum or covered with an anti-slip rubber coating.

This extendable loading floor is also available in combination with a drawer system in different sizes (CB-800).

- Easy loading and unloading - you save time with it!
- Non-slip, hard-wearing, easy-to-clean loading surface made of aluminum checker plate
- best quality in processing and design
- dimensionally stable, unbreakable and loadable up to approx. 350 kg
- secure supply of spare parts
- Simple assembly according to video and written assembly instructions
- Convenient securing of the load with the integrated lashing eyes
- The ball-bearing loading floor is unlocked with the handle.

A notice:  these products are so-called selection products, which are individually manufactured to your order. This pull-out drawer is divided into S / M / L categories in terms of dimensions. Due to the rectangular shape, the loading floor fits on different vehicles. As an option, the loading floor can be fully adapted to the vehicle. The area of the accessory drawer is expanded to include the area behind the wheel arches.

The universal loading floor CB-778 is available as an accessory for these pickup vehicles with the following dimensions:

• Size S (1020*1380*208) - Toyota Hilux Revo, Isuzu Dmax, Mitsubishi L200, Fiat Fullback
• Size M (1080*1380*208) - Ford Ranger, Nissan Navara NP300, Renault Alaskan
• Size L (1200*1440*208) - VW Amarok
• Size XL - with the appropriate width, but 1700 mm length for single and extracab pickups.

When ordering, please indicate the vehicle in question so that we can assign you the right vehicle. You can also choose between the pull-out loading floor in aluminum or covered with an anti-slip rubber coating.

- in sizes 90 x 90 cm / 90 x 110 cm / 90 x 150 cm
- UV and weather resistant
- with hooks for quick, uncomplicated attachment
- with carry bag
- Best material and processing quality
- unbreakable and resilient

CARRYBOY has been building accessories for small pickup trucks: hardtops, tonneau covers, roll bars, running boards, roof racks, bumpers since 1969. We build hundreds of hardtops and tonneau covers and much more every day, which are sold in more than 150 countries worldwide.

If you have any questions, please contact us by telephone on 02151-393593 or by e-mail at info@carryboy.de

Please ask for the exact delivery time

This extendable loading floor is also available in combination with a drawer system in different sizes (CB-800).

- Easy loading and unloading - you save time with it!
- Non-slip, hard-wearing, easy-to-clean loading surface made of aluminum checker plate
- best quality in processing and design
- dimensionally stable, unbreakable and loadable up to approx. 350 kg
- secure supply of spare parts
- Simple assembly according to video and written assembly instructions
- Convenient securing of the load with the integrated lashing eyes
- The ball-bearing loading floor is unlocked with the handle
- The loading area is almost completely filled - Wheel housings are cut out

A notice:  these products are so-called selection products, which are individually manufactured to your order. This pull-out drawer is divided into S / M / L categories in terms of dimensions. Due to the rectangular shape, the loading floor fits on different vehicles. As an option, the loading floor can be fully adapted to the vehicle. The area of the accessory drawer is expanded to include the area behind the wheel arches.

When ordering, please indicate the vehicle in question so that we can assign you the right vehicle. You can also choose between the pull-out loading floor in aluminum or covered with an anti-slip rubber coating.

Item No. CB-550x

CARRYBOY - roof basket made of stainless steel,
light and very stable aluminum with matching crossbars

Available in 4 different sizes and 2 colors (silver or black):

CB-550x-00    100*100cm

CB-550x-01    100*120cm

CB-550x-02    100*160cm

CB-550x-03    100*130cm

 
The luggage rack can be mounted on most cars, SUVs, VANs, pickups, trucks and Carryboy hardtops with suitable fasteners (self-assembly is possible). - No drilling required!

- Dimensionally stable, unbreakable and resilient
- easy to assemble - do it yourself -
- available in different dimensions
- secure supply of spare parts


The roof basket is supplied with crossbars and can be attached to the roof rails using the mounting kit supplied.

Appropriate fasteners (roof racks) are required for attachment to SUVs and pickup truck cabs.

If you have any questions, please contact us by telephone on 02151-393593 or by e-mail at info@carryboy.de

Please ask for delivery times for additional sizes.

Item No. CB-550x

CARRYBOY - roof basket made of stainless steel,
light and very stable aluminum with matching crossbars

Available in 4 different sizes and 2 colors (silver or black):

CB-550x-00    100*100cm

CB-550x-01    100*120cm

CB-550x-02    100*160cm

CB-550x-03    100*130cm

 
The luggage rack can be mounted on most cars, SUVs, VANs, pickups, trucks and Carryboy hardtops with suitable fasteners (self-assembly is possible). - No drilling required!

- Dimensionally stable, unbreakable and resilient
- easy to assemble - do it yourself -
- available in different dimensions
- secure supply of spare parts


The roof basket is supplied with crossbars and can be attached to the roof rails using the mounting kit supplied.

Appropriate fasteners (roof racks) are required for attachment to SUVs and pickup truck cabs.

If you have any questions, please contact us by telephone on 02151-393593 or by e-mail at info@carryboy.de

Please ask for delivery times for additional sizes.

CARRYBOY - storage box / transport box for pickup - loading area of all brands Front opening CB-704 standard size

Your NOVISauto accessories at a glance:

the optimal alternative for backup  of your transported goods!  No drilling is required to attach the cleats anywhere on the top edge of the cargo box side walls. No damage to paint or sheet metal during installation and under load. The cleats are made of plastic-coated glass, so they are extremely durable and will not rust. Loads of up to around 200 kg are possible and can also be used for most of our luggage compartment covers. Additional CARGO CLEADS are required for larger loads:  always use more CARGO CLEATS to secure your cargo than necessary! - - Sold in pairs, information on attachment and application options, such as tips for knotting, for optimal loading is included.

To note:
 
CARGO CLEATS cannot be used with load compartment tubs that are over the edge (overrail tubs) -  unless the tub is cut out at the relevant attachment points.

CARGO CLEATS is not suitable for plastic-coated cargo boxes.

NOVISauto - pre-compressed, permanently elastic joint sealing tape  for sealing the joint between the hard top or load compartment cover and the vehicle load box.

Seals reliably with joint widths between 4 mm and 9 mm when expanded. The foam rubber is placed on the cleaned bottom edge of the upright hard top / tonneau cover  glued on, previously trimmed a little at the ends.  Then the hard top / cargo area cover is carefully aligned on the upper edge of the vehicle cargo box and fixed using the existing aluminum clamps.

A detailed assembly description is enclosed with the delivery.

The NOVISAuto anti-slip pickup floor mat for the loading area is a perfect addition to your pickup. The anti-slip mat from NOVISAuto not only impresses with its properties as a non-slip accessory for the loading area, but also as an instrument for visually enhancing your loading area.

The Bedmat is an integrated system made of permanently stable and durable materials. The surface of the anti-slip mat is covered with a comfortable but easy-care artificial carpet. This carpet provides the anti-slip properties and can be kept clean with a high-pressure cleaner or a hand brush.

The base of the anti-slip mat for your pickup is made from 100% recycled polypropylene. The material is foamed and applied in 3 separate layers. In combination with the carpet surface, this ensures a unique protection factor against chemicals, dust & dirt, impacts and point loads. The padding and underlay also make work on the loading area easier. The surface prevents objects that are transported on the loading area from slipping.

The NOVISAuto Bedmat model can be universally installed in all pickup vehicles. Perforations for US - full-size pickups (e.g. Dodge RAM, Ford F150) are already in place. For other less common vehicles, the mat can easily be cut to size with a sharpened box cutter. The dimensions of 170cm width and 250cm length allow installation in almost all pickup - loading areas.

It can be installed either on a cargo area liner, on a spray coating or on the bare surface of the cargo floor. Appropriate adhesive pads with Velcro are included in the delivery.

Ideally suited for extra cab or singlecab pickups (Toyota Hilux singlecab, VW Amarok singlecab, Ford Ranger singlecab, Ford Ranger extra cab, Toyota Hilux extra cab, Nissan Navara extra cab, Isuzu D-Max extra cab) or individual loading area extensions (e.g. by the company Veeth in the Netherlands ).

• universally applicable for all models
• Dimensionally stable, extremely hard-wearing and durable - therefore the best protection against scratches
  and damage to the loading area
• Protection against negative environmental influences (e.g. chemicals, acids, rust, etc.)
• easy to assemble - no drilling required in the vehicle platform
• ideally suited for an exceptionally long service life
• stable and easy to use
• continuous fabric between loading area and tailgate against unwanted deposits
• Anti-slip surface for safe transport

This is the most innovative and unique load compartment liner there is. You get the look and comfort of a rug in an ultra-tough 100% polypropylene product. Thus, your loading area is not only protected against impacts and damage, but the bed liner also withstands stresses from gravel to battery acid.