NOVISauto trunk cover TRIFECTA - tarpaulin for folding - EXFRD12
Ford Ranger Double Cab from 2012+/2019+
€850.01*
Available in 90 days
Delivery from April
Notes on purchase? Please enter here!
Product number: EX-92637
Product information "NOVISauto trunk cover TRIFECTA - tarpaulin for folding - EXFRD12"
Expand your Ford Ranger double cab with a high-quality load compartment cover from NOVISauto. Fresh original design, seamlessly adapts to your vehicle. It offers your pickup high quality and comfortable protection. Expand your Ranger with a custom-fit load compartment cover made of an attractive looking, black vinyl-coated, extremely stable textile tarpaulin. It can be unfolded and fastened three times up to the cabin. "TRIFECTA" thus offers maximum possible freedom when loading and unloading your transport goods. Supplied with assembly kit and installation instructions.
NOVISauto cargo area cover tarpaulin TRIFECTA for folding
for the Ford Ranger double cab from year of construction 2012:
- Vinyl tarpaulin "Trifecta" for folding
- Precise processing and selected, resilient materials
- Thick, high-quality "Heavy Duty" tarpaulin in black with imitation leather embossing
- Seams secured several times also withstand permanent loads
- Anodized and black coated aluminum frame
- Installation without tools within 5 minutes
- Easy to use with a spring lock
- Quality seals all around
- Cover rests on the sill - the seals ensure reliable protection against water and dust
- Double axle - hinges for commercial use - are not subject to the weather as they are installed under the tarpaulin and protected with seals
- Lockable with tailgate lock
- Can be driven open and locked with a convenient lightning bolt buckle
Please note:
Only suitable for Ford Ranger double cab without roll bar (Wildtrak / Limited). The front protective grille must be removed before installing the cover (4 screws). Can be combined with our "Sportbar 2.0" roll bar.
Trust our service: even years later you will receive the right spare parts!
The tarpaulin for the Ford Ranger of the "folding tarpaulin" type can be opened effortlessly and in seconds and folded in two. The tarpaulin for the Ranger can be assembled completely without tools - the TRIFECTA tarpaulin is a stable, "heavy-duty" tarpaulin cover for heavy-duty commercial use. All products are mature and have proven themselves on the market for many years. The high quality of the materials used prevents aging after only a short time - another difference to comparable, inexpensive tarpaulins. The TRIFECTA foldable tarpaulin for the Ford Ranger double cab is delivered fully assembled and ready to be erected.
The processing is precise, the parts are made of the best, selected materials. All seams are secured multiple times. Even the smallest parts, such as the quick clamps, are developed and produced in a user-friendly manner: simple, problem-free and quick handling, space-saving design, stability and safety are the most important specifications for the development engineers. The rear clamps are equipped with springs for quick opening and closing. When not in use, the clamps sink into the profiles of the cover construction. When folded, open, TRIFECTA can be attached to the rear cabin wall of the Ford Ranger vehicle using sturdy straps and buckles. Bulky goods can thus be accommodated quickly and easily on the open part of the flatbed.
The TRIFECTA tarpaulin for the Ford Ranger can be assembled and disassembled in just 5 minutes. Thanks to a weight of only approx. 5 kg, the load compartment cover can be quickly stowed anywhere in the Ranger - if you ever need the entire space of the load compartment in full height. After a brief visual check that the edges are flush, the tarpaulin can be immediately attached to the vehicle using the clamp system. We expressly recommend our folding tarpaulin - TRIFECTA - for installation in vehicles with a load compartment tub and integrated edge protection.
The opening clamps on the tailgate of the Ford Ranger can only be operated from the interior. This means that the entire cargo area can be closed using the tailgate. the folding hinges made of a glass core, coated with a thick layer of nylon, are hard-wearing and do not lend themselves. They easily withstand attempts to open them from the outside.
The TRIFECTA is mounted on the loading sill of the Ford Ranger. This enables maximum tightness of the luggage compartment cover. The premium all-round seals completely seal the tarpaulin against water. Cross arches integrated in the tarpaulin are designed in such a way that no backwater forms. Moisture is drained via the cover and can run off unhindered at the edges of the vehicle. Hinges are not exposed to external influences because they are covered by the tarpaulin. The cargo area stays dry.
The advantages for you:
"SpeedKlamps" - quick-release clamps made of extremely hard, plastic-coated glass are ideally suited for quick and safe opening and closing of the cover. The clamps sink into the profiles when not in use, they cannot be lost.
Safe and reliable practical use is the manufacturer's obligation. New products are developed, produced and thoroughly tested according to these specifications before they are offered on the market. Our straps and buckles are highly resilient. TRIFECTA can be easily and securely attached to the cabin while driving.
The newly developed "Maxi-Hinges" are heavy-duty double-axis hinges specially developed for TRIFECTA, which can withstand all loads in commercial
withstand everyday life permanently.
Prädikat seals are used to seal and protect all contact points. This keeps water and dust out of the hold. The seal is durable and guarantees a permanent gap-free seal between the load compartment cover and the vehicle.
Trust our service: even years later you will receive the right spare parts!
Properties "NOVISauto trunk cover TRIFECTA - tarpaulin for folding - EXFRD12"
| Construction year: | 2023, 2024 |
|---|---|
| Make/Model: | Ford Ranger, VW Amarok |
| ⓘ Cross arches/slats: | ready-to-mount frame with reinforcement |
| ⓘ Frame: | aluminium frame all around |
| ⓘ Height above edge of cargo area: | flat |
| ⓘ Latch and lock: | 2-handle release from inside |
| ⓘ Loading area fully accessible: | yes |
| ⓘ Materials: | Vinyl: black - leather texture in industry quality |
| ⓘ Surface finish: | Vinyl: mattschimmernd |
| ⓘ approximate assembly time: | 5 min |
| ⓘ can only be unlocked from the inside: | yes |
| ⓘ control: | manual |
| ⓘ installation type: | clamps, no drilling |
| ⓘ keep open while driving: | yes |
| ⓘ particularly UV-resistant: | yes |
| ⓘ particularly suitable for: | caravan cabin |
| ⓘ special feature: | extremly short assembly time, foldable, versatile use |
| cabin length vehicle: | double cab |
| type of coverage: | Foldable tarpaulin |
| Untertitel: | Ford Ranger Double Cab from 2012+/2019+ |
| Serie: | Modell TRIFECTA |
| Art der Abdeckung: | Plane zum Falten |
| Delivery Time: | 1-2 weeks |
Datasheets
Hersteller:
RealTruck
Pedersholmparken 10
3600 Frederikssund
Denmark
RealTruck
Pedersholmparken 10
3600 Frederikssund
Denmark
Verantwortliche Person:
Novisauto Talring 118
47802 Krefeld
info@novisauto.de
Novisauto Talring 118
47802 Krefeld
info@novisauto.de
Do you have any questions or need further information? Then please give us a call.
Expert advice by phone +49 (0) 2151-393593 or by e-mail: info@carryboy.de
Compare product
Image
Name
NOVISauto trunk cover TRIFECTA - tarpaulin for folding - EXFRD12
Carryboy cargo area cover model GRX-FTD
Carryboy cargo area cover tarpaulin 743-FTD
CARRYBOY cargo area cover with motor lift - SMX2-FTD
Carryboy load compartment cover aluminum roller blind 789-FTD
Carryboy load compartment cover aluminum roller blind 789-FTD
Carryboy load compartment cover aluminum roller blind with crossbar system 789F-FTD
Carryboy load compartment cover lid GRX2R-FTD (for Wildtrak bracket)
Carryboy load compartment cover lid GRX2R-FTD (for Wildtrak bracket)
Carryboy load compartment cover roller blind 789R-FTD (for Wildtrak frame)
Carryboy load compartment cover roller blind 789R-FTD (for Wildtrak frame)
Carryboy load compartment cover roller blind with bracket R-798-FTD
Carryboy load compartment cover SLX-FTD
Carryboy loading space cover tarpaulin 743-FD
Carryboy loading space cover tarpaulin 743-FRD
Carryboy Sport Lid SX-FTD
Link
Description
NOVISauto cargo area cover tarpaulin TRIFECTA for folding
for the Ford Ranger double cab from year of construction 2012:
- Vinyl tarpaulin "Trifecta" for folding
- Precise processing and selected, resilient materials
- Thick, high-quality "Heavy Duty" tarpaulin in black with imitation leather embossing
- Seams secured several times also withstand permanent loads
- Anodized and black coated aluminum frame
- Installation without tools within 5 minutes
- Easy to use with a spring lock
- Quality seals all around
- Cover rests on the sill - the seals ensure reliable protection against water and dust
- Double axle - hinges for commercial use - are not subject to the weather as they are installed under the tarpaulin and protected with seals
- Lockable with tailgate lock
- Can be driven open and locked with a convenient lightning bolt buckle
Please note:
Only suitable for Ford Ranger double cab without roll bar (Wildtrak / Limited). The front protective grille must be removed before installing the cover (4 screws). Can be combined with our "Sportbar 2.0" roll bar.
Trust our service: even years later you will receive the right spare parts!
CARRYBOY - Load compartment cover GRX cover with stainless steel bracket
for Ford Ranger double cab (years of construction 2012+ / 2019+)
- with painted roll bar / protective bar with stainless steel inserts
- can be moved with ease, thanks to gas springs
- The cover is insensitive in robust, commercial use
- ideally suited for an exceptionally long service life
- Base material GRP, therefore particularly stable and easy to repair
- Offer in white primer, also available in body color
- securely lockable - two keys incl.
- locks the entire loading area
- Save up to 15% on fuel with CARRYBOY
- Can also be used with over-edge and under-edge load compartment tub
- detailed assembly description - assembly kit included
The GRX cargo area cover from CARRYBOY for the Ford Ranger double cab is a stylish, but at the same time functional cover. This Ford Ranger accessory combines the appealing element of a painted tonneau cover with a polished stainless steel styling bar for contrast. The optimal mix for the most elegant design on the market!
The flat cover GRX for the Ranger double cab adapts seamlessly to the vehicle thanks to the paint finish in the vehicle color. The edges of the load compartment lid are curved over the edge of the vehicle. This ensures that the entire loading area is securely closed. Wraparound seals wrap around the cargo area of your Ford Ranger vehicle, keeping water and dust out of the cargo area. Rain drains freely over the lid on the edge of your Ford Ranger double cab pickup.
The rotary lock with cylinder and set of keys enables the entire loading area to be locked securely. Since the GRX tonneau cover for the Ford Ranger is made in one piece together with the roll bar, there are no rattling parts, unnecessary places for water entry or unsightly seams.
The cargo area of your Ford Ranger double cab can be brightly lit with the lid! The integrated interior light with 2 rows of bright LED lights ensures good lighting in the loading area. If this is still not enough, the cargo area can be equipped with our lower edge light system Blight as another Ford Ranger accessory. The styling bar / roll bar of the cover is shaped in such a way that the 3rd brake light on the driver's cab is always reliably visible.
Be on the safe side with the GRX tonneau cover for the Ford Ranger double cab. We guarantee you a secure supply of spare parts beyond the service range of the vehicle manufacturer.
Please note:
Although this Ford Ranger accessory fits all Ranger double cab truck beds, it is not compatible with the Limited and Wildtrak uprights. The front protection grille on the XL and XLT models must be removed. The GRX styling bar is mounted in place of the bar mentioned. In this no brake light is embedded! On the XL and XLT, the brake light is mounted on the driver's cab and is visible with the roll bar. The Limited and Wildtrak no longer have this brake light after installation. The brake light is no longer required if the vehicle is registered as a truck.
Carryboy - Softlid 743 cargo area cover Vinyl tarpaulin with Velcro fastener
for Ford Ranger double cab from year of construction 2012 (also 2019+)
- Cargo area tarpaulin - plastic-laminated, waterproof and robust
- Installation on loading sill, ideal for building with over edge - loading space tub
- weatherproof and moisture resistant
- The tarpaulin is attached with Velcro / can be driven open
- Save up to 15% on fuel with CARRYBOY
- ideally suited for an exceptionally long service life
- it is stable and easy to use
- for a variety of commercial uses
- detailed assembly description - assembly kit included
The CARRYBOY cargo area cover of the vinyl tarpaulin type for the Ford Ranger double cab from year of construction 2012 combines ease of use with an unbeatable price-performance ratio. The load compartment tarpaulin for the Ford Ranger double cab impresses with its elegant appearance and functionality.
The simple Velcro system of the vinyl tarpaulin for the Ford Ranger double cab guarantees that the cargo area tarpaulin can be opened and closed quickly. Fastening straps with high-quality lightning fasteners reliably secure the tarpaulin for the loading area of the Ranger double cab, so that it is also possible to drive with the tarpaulin open.
The surface of Carryboy's soft lid consists of a dark gray knobbed surface, which makes this vinyl tarpaulin for the Ford Ranger pickup unmistakable. In addition, the tarpaulin provides effective protection against dust and water for your Ford Ranger double cab loading area. All-round seals reliably keep the elements away from the cargo area.
The Carryboy CB-743 soft lid for the Ford Ranger double cab (2012+) can be combined with the current design of the loading area, which has remained unchanged since 2012 and beyond 2019. Water that collects on the vinyl tarpaulin for the Ford Ranger is reliably drained off via the anodised aluminum frame - this keeps the loading area dry.
An installation without drilling is possible for all Ford Ranger vehicles with an overhang tub. However, installation with brackets or front protection grilles cannot be carried out.
Please note that the Carryboy Softlid CB-743 must be attached directly to the loading sill for installation without an overedge. We recommend blind rivet nuts for this. As an alternative to shipping the tarpaulin, we also offer an on-site installation service.
CARRYBOY - Load compartment cover lid with motor lift SMX2-FTD
for Ford Ranger double cab from year of construction 2012
- Two electric motors raise the cover to cabin height
- Save up to 15% on fuel thanks to aerodynamics
- Thanks to GRP, the cover is robust in everyday use
- ideally suited for an exceptionally long service life
- it is stable and easy to use
- for a variety of commercial uses
- Paintwork in body color possible
- lockable - two keys incl.
- Connection to the central locking of the driver's cab
- Lid can be moved open
- Suitable for transporting tall objects
Carryboy Roller Lid aluminum roller blind roll cover CB-789-FTD
for Ford Ranger Double Cab 2023+
- Roller Lid - Alupanzer Aluminum roller blind rustproof and easy to use
- Roller cover can be ordered in black or silver
- Ergonomic, ribbed grip strip makes operation easier and ensures a good grip even in the rain
- with lock and key, also locks tailgate
- weatherproof and moisture resistant, no backwater
- Save up to 15% on fuel with Carryboy
- ideally suited for an exceptionally long service life
- Convenient pull tab ensures convenient operation
- for a variety of commercial uses
- Can be used with lower edge - load compartment tub
- detailed assembly description - assembly kit included
- only suitable without front protection grille, stainless steel bar or Wildtrak bar
The Rollerlid 789 for the Ford Ranger double cab is an aluminum roller blind for retrofitting on your Ford Ranger double cab. The flat roller blind, which ends flush with the loading sill, is attached to the vehicle using fastening rails. All required components are included in the scope of delivery. Permanent installation with a weld seam is recommended to ensure the best seal, but is not essential.
The aluminum roller blind from CARRYBOY for the Ford Ranger double cab is available with slats in aluminum color or completely in matt black. The double-walled aluminum slats are each firmly connected with an articulated hinge with retracted seals. Due to the double-walled design of the individual slats, the roller blind is particularly robust and resilient. The ergonomic grip strip for operating the Ford Ranger roller blind has a good grip thanks to the ribbing - even in wet weather!
The Rollerlid 789 for the Ranger double cab is installed flat at the height of the loading sill. Rainwater that falls on the Ford Ranger's cargo area is safely kept away from the cargo area via drain hoses on the roller blind box and on the tailgate. The CARRYBOY roller blind has a rotary lock with integrated locking hooks for the tailgate. The closure forms a unit with the tailgate of the Ford Ranger double cab and is therefore a secure and flexible closure. The aluminum blind 789 is an attractive and flexible Ford Ranger accessory.
Carryboy Roller Lid aluminum roller blind roll cover CB-789-FTD
for Ford Ranger Double Cab 2012+
- Roller Lid - Alupanzer Aluminum roller blind rustproof and easy to use
- Roller cover can be ordered in black or silver
- Ergonomic, ribbed grip strip makes operation easier and ensures a good grip even in the rain
- with lock and key, also locks tailgate
- weatherproof and moisture resistant, no backwater
- Save up to 15% on fuel with Carryboy
- ideally suited for an exceptionally long service life
- Convenient pull tab ensures convenient operation
- for a variety of commercial uses
- Can be used with lower edge - load compartment tub
- detailed assembly description - assembly kit included
- only suitable without front protection grille, stainless steel bar or Wildtrak bar
The Rollerlid 789 for the Ford Ranger double cab is an aluminum roller blind for retrofitting on your Ford Ranger double cab. The flat roller blind, which ends flush with the loading sill, is attached to the vehicle using fastening rails. All required components are included in the scope of delivery. Permanent installation with a weld seam is recommended to ensure the best seal, but is not essential.
The aluminum roller blind from CARRYBOY for the Ford Ranger double cab is available with slats in aluminum color or completely in matt black. The double-walled aluminum slats are each firmly connected with an articulated hinge with retracted seals. Due to the double-walled design of the individual slats, the roller blind is particularly robust and resilient. The ergonomic grip strip for operating the Ford Ranger roller blind has a good grip thanks to the ribbing - even in wet weather!
The Rollerlid 789 for the Ranger double cab is installed flat at the height of the loading sill. Rainwater that falls on the Ford Ranger's cargo area is safely kept away from the cargo area via drain hoses on the roller blind box and on the tailgate. The CARRYBOY roller blind has a rotary lock with integrated locking hooks for the tailgate. The closure forms a unit with the tailgate of the Ford Ranger double cab and is therefore a secure and flexible closure. The aluminum blind 789 is an attractive and flexible Ford Ranger accessory.
carryboy Roller Lid Model CB-789F-FTD for Ford Ranger Double Cab 2012+
- Roller Lid - Alupanzer Aluminum roller blind rustproof and easy to use
- Roller cover can be ordered in black or silver
- Lateral cross member rails made of aluminum with elegant, robust and painted (anthracite) GRP frame
- Ergonomic, ribbed grip strip makes operation easier and ensures a good grip even in the rain
- with lock and key, also locks tailgate
- weatherproof and moisture resistant, no backwater
- Save up to 15% on fuel with Carryboy
- ideally suited for an exceptionally long service life
- Convenient pull tab ensures convenient operation
- for a variety of commercial uses
- Can be used with lower edge - load compartment tub
- detailed assembly description - assembly kit included
- only suitable without front protection grille or other roll bars
The Rollerlid 789F for the Ford Ranger double cab is an aluminum roller blind for retrofitting on your Ranger double cab pickup. The aluminum blind closes evenly with the edge of the tailgate. On the sides of the loading area, it has elegant, gray lacquered sockets for the integrated cross member bracket. The crossbeams can be slid to any position on an aluminum longitudinal beam rail that is integrated directly into the frame.
Expand the standard aluminum roller blind for the Ford Ranger double cab with a practical cross member preparation. You get the complete pick-up loading space for smaller items to be transported, while bulky items (e.g. bicycles, roof tent) can be accommodated on the cross members. Due to the wide contact surface of the aluminum roller blind 789F on the loading sill of the Ford Ranger, additional loads can easily be applied to the roller blind via the cross members.
The aluminum roller blind from CARRYBOY for the Ford Ranger is available with aluminum-colored slats or completely in matt black. The double-walled aluminum slats are each firmly connected with an articulated hinge with retracted seals. Due to the double-walled design of the individual slats, the roller blind for the Ranger double cab is particularly robust and resilient. The ergonomic grip strip for operating the Ford Ranger double cab aluminum roller blind has a good grip thanks to the ribbing - even in wet weather!
Rainwater that falls on the Ford Ranger's cargo area is safely kept away from the cargo area via drain hoses on the roller blind box and on the tailgate. The CARRYBOY roller blind has a rotary lock with integrated locking hooks for the tailgate. The closure forms a unit with the tailgate of the Ford Ranger double cab and is therefore a secure and flexible closure. The aluminum blind 789 is an attractive and flexible Ford Ranger accessory.
CARRYBOY - load compartment cover lid GRXR-FTD
for Ford Ranger Wildtrak double cab 2012+ / 2019+ with original Wildtrak bracket
Ford Ranger Wildtrak accessories - load compartment cover with lid and gas springs for installation with original Wildtrak roll bar, Wildtrak styling bar
- Only for installation with genuine Ford Ranger Wildtrak roll bar
- can be moved with ease, thanks to gas springs
- The cover is insensitive in robust, commercial use
- ideally suited for an exceptionally long service life
- Base material GRP, therefore particularly stable and easy to repair
- Offer in 42A anthracite (color of Wildtrak frame) or with delivery time in vehicle color
- securely lockable - two keys incl.
- NOW NEW AS STANDARD: CENTRAL LOCKING OF THE COVER
- locks the entire loading area securely
- Save up to 15% on fuel with CARRYBOY
- Can be used with the original load compartment tub
- detailed assembly description - assembly kit included
Note: The 2019+ Ford Ranger has a cargo area liner with large ridges behind the tailgate. Here the upper part of the bead must be cut off before assembly in order to be able to assemble the cover with an absolutely precise fit. The cut can easily be made with a knife or saw. Behind the bead there is a cavity without cables or sheet metal.
The GRX cargo area cover from CARRYBOY for the Ford Ranger Wildtrak double cab from year of construction 2012 is a stylish, but at the same time functional cover. This Ford Ranger Wildtrak Accessory combines the appealing element of a painted tonneau cover with the genuine Ford Ranger Wildtrak Upright. The optimal mix for the most elegant design on the market! Order the GRX cover for the Ranger Wildtrak and the Ford Ranger Raptor in either the standard color of the Wildtrak roll bar or in the body color of your Ford Ranger.
The GRX flat cover for the Ford Ranger Wildtrak double cab adapts seamlessly to the vehicle and the Wildtrak bracket thanks to the high-quality paintwork. The edge of the luggage compartment lid on the tailgate is curved over the edge of the vehicle. This ensures that the entire loading area is securely closed. The load compartment cover for the Ford Ranger Wildtrak is pushed directly between the original Wildtrak bracket with fastening rails. Sealing with a sealing seam and the water catcher on the load compartment cover reliably drain rain away from the load area. Water runs into the side channels of the cover and is routed out of the cargo area with drain hoses.
The rotary lock with cylinder and set of keys enables the entire loading area to be locked securely. Since the GRX load compartment cover for the Ford Ranger Wildtrak, Ford Ranger Raptor is made of one piece, there are no rattling parts, unnecessary places for water entry or unsightly seams. Multi-hardened hinges and a thick lamination of the Ford Ranger Wildtrak tonneau cover withstand even the most difficult weather!
The cargo area of your Wildtrak double cab can be brightly lit with the lid! The integrated interior light with 2 rows of bright LED lights provides good lighting in the loading area. If this is still not enough, the cargo area can be equipped with our lower edge light system Blight as another Ford Ranger Wildtrak accessory. The styling bar / roll bar of the cover is shaped in such a way that the 3rd brake light on the driver's cab is always reliably visible.
Be on the safe side with the GRX tonneau cover for the Ranger Wildtrak and Ranger Raptor double cab. We guarantee you a secure supply of spare parts beyond the service range of the vehicle manufacturer.
CARRYBOY - load compartment cover lid GRXR-FTD
for Ford Ranger Wildtrak double cab 2012+ / 2019+ with original Wildtrak bracket
Ford Ranger Wildtrak accessories - load compartment cover with lid and gas springs for installation with original Wildtrak roll bar, Wildtrak styling bar
- Only for installation with genuine Ford Ranger Wildtrak roll bar
- can be moved with ease, thanks to gas springs
- The cover is insensitive in robust, commercial use
- ideally suited for an exceptionally long service life
- Base material GRP, therefore particularly stable and easy to repair
- Offer in 42A anthracite (color of Wildtrak frame) or with delivery time in vehicle color
- securely lockable - two keys incl.
- NOW NEW AS STANDARD: CENTRAL LOCKING OF THE COVER
- locks the entire loading area securely
- Save up to 15% on fuel with CARRYBOY
- Can be used with the original load compartment tub
- detailed assembly description - assembly kit included
Note: The 2019+ Ford Ranger has a cargo area liner with large ridges behind the tailgate. Here the upper part of the bead must be cut off before assembly in order to be able to assemble the cover with an absolutely precise fit. The cut can easily be made with a knife or saw. Behind the bead there is a cavity without cables or sheet metal.
The GRX cargo area cover from CARRYBOY for the Ford Ranger Wildtrak double cab from year of construction 2012 is a stylish, but at the same time functional cover. This Ford Ranger Wildtrak Accessory combines the appealing element of a painted tonneau cover with the genuine Ford Ranger Wildtrak Upright. The optimal mix for the most elegant design on the market! Order the GRX cover for the Ranger Wildtrak and the Ford Ranger Raptor in either the standard color of the Wildtrak roll bar or in the body color of your Ford Ranger.
The GRX flat cover for the Ford Ranger Wildtrak double cab adapts seamlessly to the vehicle and the Wildtrak bracket thanks to the high-quality paintwork. The edge of the luggage compartment lid on the tailgate is curved over the edge of the vehicle. This ensures that the entire loading area is securely closed. The load compartment cover for the Ford Ranger Wildtrak is pushed directly between the original Wildtrak bracket with fastening rails. Sealing with a sealing seam and the water catcher on the load compartment cover reliably drain rain away from the load area. Water runs into the side channels of the cover and is routed out of the cargo area with drain hoses.
The rotary lock with cylinder and set of keys enables the entire loading area to be locked securely. Since the GRX load compartment cover for the Ford Ranger Wildtrak, Ford Ranger Raptor is made of one piece, there are no rattling parts, unnecessary places for water entry or unsightly seams. Multi-hardened hinges and a thick lamination of the Ford Ranger Wildtrak tonneau cover withstand even the most difficult weather!
The cargo area of your Wildtrak double cab can be brightly lit with the lid! The integrated interior light with 2 rows of bright LED lights provides good lighting in the loading area. If this is still not enough, the cargo area can be equipped with our lower edge light system Blight as another Ford Ranger Wildtrak accessory. The styling bar / roll bar of the cover is shaped in such a way that the 3rd brake light on the driver's cab is always reliably visible.
Be on the safe side with the GRX tonneau cover for the Ranger Wildtrak and Ranger Raptor double cab. We guarantee you a secure supply of spare parts beyond the service range of the vehicle manufacturer.
Carryboy aluminum cover roll cover CB-789R
- Roller Lid - Alupanzer Aluminum roller blind rustproof and easy to use
- Roller cover can be ordered in black or silver
- Ergonomic, ribbed grip strip makes operation easier and ensures a good grip even in the rain
- with lock and key, also locks tailgate
- weatherproof and moisture resistant, no backwater
- Save up to 15% on fuel with Carryboy
- ideally suited for an exceptionally long service life
- Convenient pull tab ensures convenient operation
- for a variety of commercial uses
- Can be used with the lower edge of the load compartment tub and the original bracket/styling bar
- detailed assembly description - assembly kit included
- only suitable with original Ford Ranger Wildtrak bracket
PLEASE NOTE: This cover fits all 2012 to present / 2019 to present cargo area liners however are fitted with a large bead on the tailgate. With such tubs, an adjustment is required in order to be able to insert the headband through the bead.
The Rollerlid 789R for the Ford Ranger Wildtrak and the Ford Ranger Raptor is an aluminum roller blind for retrofitting on your Ford Ranger with Wildtrak roll bar. The roller blind is installed between the jaws of the Wildtrak styling bar. The roll cover for the Wildtrak is installed on a rail mounting system, which is also included in the scope of delivery. A convenient pull tab allows the blind to be operated from the tailgate. The integrated torsion spring ensures that the blind opens automatically.
Latching options on the tailgate and the center of the blind also allow extra-long items to be transported on the loading area.
The aluminum roller blind from CARRYBOY for the Ford Ranger Wildtrak is available with slats in aluminum color or completely in matt black. The double-walled aluminum slats are each firmly connected with an articulated hinge with retracted seals. Due to the double-walled design of the individual slats, the roller blind is particularly robust and resilient. The rounded surface structure gives the Carryboy aluminum roller blind 789R for the Ford Ranger Wildtrak and Ford Ranger Raptor a unique and extremely elegant look.
The Rollerlid 789R for the Ranger Wildtrak and the Ranger Raptor double cab is installed flat at the height of the loading sill. Rainwater that falls on the Wildtrak's loading space is safely kept away from the loading space via drain hoses on the roller blind box and on the tailgate. The CARRYBOY Wildtrak roller blind has a rotary lock with integrated locking hooks for the tailgate. The closure forms a unit with the tailgate and is therefore a secure and flexible closure.
4 drain hoses, 2 each on the tailgate and 2 on the roller blind box behind the cab of the Ford Ranger Wildtrak allow all water to be drained off comprehensively - for the most effective protection against water and dust.
Carryboy aluminum cover roll cover CB-789R
- Roller Lid - Alupanzer Aluminum roller blind rustproof and easy to use
- Roller cover can be ordered in black or silver
- Ergonomic, ribbed grip strip makes operation easier and ensures a good grip even in the rain
- with lock and key, also locks tailgate
- weatherproof and moisture resistant, no backwater
- Save up to 15% on fuel with Carryboy
- ideally suited for an exceptionally long service life
- Convenient pull tab ensures convenient operation
- for a variety of commercial uses
- Can be used with the lower edge of the load compartment tub and the original bracket/styling bar
- detailed assembly description - assembly kit included
- only suitable with original Ford Ranger Wildtrak bracket
PLEASE NOTE: This cover fits all 2012 to present / 2019 to present cargo area liners however are fitted with a large bead on the tailgate. With such tubs, an adjustment is required in order to be able to insert the headband through the bead.
The Rollerlid 789R for the Ford Ranger Wildtrak and the Ford Ranger Raptor is an aluminum roller blind for retrofitting on your Ford Ranger with Wildtrak roll bar. The roller blind is installed between the jaws of the Wildtrak styling bar. The roll cover for the Wildtrak is installed on a rail mounting system, which is also included in the scope of delivery. A convenient pull tab allows the blind to be operated from the tailgate. The integrated torsion spring ensures that the blind opens automatically.
Latching options on the tailgate and the center of the blind also allow extra-long items to be transported on the loading area.
The aluminum roller blind from CARRYBOY for the Ford Ranger Wildtrak is available with slats in aluminum color or completely in matt black. The double-walled aluminum slats are each firmly connected with an articulated hinge with retracted seals. Due to the double-walled design of the individual slats, the roller blind is particularly robust and resilient. The rounded surface structure gives the Carryboy aluminum roller blind 789R for the Ford Ranger Wildtrak and Ford Ranger Raptor a unique and extremely elegant look.
The Rollerlid 789R for the Ranger Wildtrak and the Ranger Raptor double cab is installed flat at the height of the loading sill. Rainwater that falls on the Wildtrak's loading space is safely kept away from the loading space via drain hoses on the roller blind box and on the tailgate. The CARRYBOY Wildtrak roller blind has a rotary lock with integrated locking hooks for the tailgate. The closure forms a unit with the tailgate and is therefore a secure and flexible closure.
4 drain hoses, 2 each on the tailgate and 2 on the roller blind box behind the cab of the Ford Ranger Wildtrak allow all water to be drained off comprehensively - for the most effective protection against water and dust.
Carryboy cargo area cover with bracket R-798-FTD for Ford Ranger
- with roll bar / protection bar
- Individual design elements depending on the vehicle
- can be moved with ease thanks to the ingenious rail system
- Save up to 15% on fuel with CARRYBOY
- insensitive in daily use
- exceptionally long service life
- stable and easy to use
- Offer in white primer, also available in body color
- lockable - two keys included
- Can also be used with over-edge and under-edge load compartment tub
- detailed assembly description - assembly kit included
- Locks the entire loading area with just one key
Carryboy - Ford Ranger double cab hardcover - fixed cover to fold up - model SLX-FTD
- with highly polished stainless steel roll bar / protection bar
- opens with the help of shock absorber gas pressure springs
- Fixed cover in white primer, also available in body color
- insensitive in robust use and easy to handle
- GRP composite structure with water leakage and break protection - UV durability
- for a variety of commercial uses
- save up to 15% on fuel with Carryboy
- Resistant and rustproof stainless steel hinges and robust flush-mounted locks on the back protect against theft
- lockable - two keys - easy to open and close of the entire cargo space
- Can also be used with over-edge and under-edge load compartment tub
- LED interior light
- 3. Driver's cab brake light remains visible
- matt black interior lining
- detailed assembly description - assembly kit included
- Delivery on disposable pallet
The Carryboy cargo area cover is characterized by its exceptionally long service life, high stability and easy repairs.
Are you looking for a practical load compartment cover for your Ford Ranger? How about an extremely stable, non-rattling lid made of easy-care GRP? The SLX model for your Ford Ranger already includes an elegant, polished stainless steel roll bar. This styling bar perfectly suits the streamlined and fresh lifestyle of your Rangers and the tonneau cover. Of course, the load compartment cover with a matching roll bar can also be painted in the color of your car.
The SLX cargo area cover from Carryboy for the Ford Ranger (double cab from year of construction 2012) is a stylish, but at the same time functional cover. This cover combines the appealing element of a painted tonneau cover with a polished stainless steel styling bar for contrast. An optimal mix for this most elegant design!
The SLX flat cover for the Ford Ranger double cab has a painted lid with a painted base for the stainless steel roll bar. The edges of the load compartment lid are curved over the edge of the vehicle. Wraparound seals wrap around your vehicle's cargo area, keeping water and dust out of the cargo area. Rain drains freely over the lid on the edge of your Ford Ranger double cab pickup.
The rotary lock with cylinder and set of keys enables the entire loading area to be locked securely.
The high-quality, thickly laminated GRP material offers a multitude of advantages in daily use: In addition to high resistance to breakage and high stability, it is also very easy to repair when used later.
The cargo area of your Ranger double cab pickup can be brightly lit. The integrated interior light with 2 rows of bright LED lamps provides good lighting in the load compartment. If this is still not enough, we recommend our 'Blight' under-edge light system as another Ford Ranger accessory. The styling bar/roll bar of the cover is shaped in such a way that the 3rd brake light on the driver's cab is always reliably visible.
We guarantee you a secure supply of spare parts beyond the service range of the vehicle manufacturer.
Please note:
The cover does not have its own 3rd brake light. If the load compartment cover SLX is to be mounted on the 'Wildtrak' or 'Limited', the brake light is omitted. However, the 3rd brake light is not required for truck registration.
Carryboy - Softlid 743 cargo area cover Vinyl tarpaulin with Velcro fastener
for Ford Ranger double cab model years 2005-2011
- Cargo area tarpaulin - plastic-laminated, waterproof and robust
- Elegant knobbed finish on the surface
- Anodized aluminum frame with integrated tarpaulin
- Fixation of the rolled up tarpaulin on three belt buckles
- All-round seals against water ingress into the cargo area
- Tarpaulin can be opened from the outside
- weatherproof and moisture resistant
- Save up to 15% on fuel with CARRYBOY
- ideally suited for an exceptionally long service life
- it is stable and easy to use
- Can be used with over-edge and under-edge load compartment tub
- detailed assembly description - assembly kit included
The CARRYBOY tonneau cover of the vinyl tarpaulin type for the Ford Ranger double cab 2005-2010 combines ease of use with an unbeatable price-performance ratio. The load compartment tarpaulin for the previous model Ford Ranger double cab impresses with its elegant appearance and functionality.
The simple Velcro system of the vinyl tarpaulin for the Ford Ranger Double Cab 2005-2011 guarantees that the cargo area tarpaulin can be opened and closed quickly. Fastening straps with high-quality lightning fasteners reliably secure the tarpaulin for the loading area of the Ranger double cab, so that it is also possible to drive with the tarpaulin open. Locks on both sides that can be operated from the outside ensure easy unlocking of the cover.
The surface of Carryboy's soft lid consists of a dark gray knobbed surface that makes this vinyl tarpaulin for the Ford Ranger Double Cab Pickup (2005-2011) unmistakable. In addition, the tarpaulin provides effective protection against dust and water for your Ford Ranger double cab loading area. All-round seals reliably keep the elements away from the cargo area.
The load compartment cover 743 of the type "tarpaulin for rolling up with Velcro" has been specially developed for installation with an over-edge load compartment tub. For Ford Ranger double cab pickups without a load compartment liner with edge protection, we recommend a consultation in advance. Installation without drilling is only possible with a trough of the type mentioned.
An installation on the Ford Ranger 2005-2011 without tub is also possible. For professional installation in a specialist workshop or on your own, we recommend using blind rivet nuts. Detailed assembly instructions are included.
Are you looking for a custom-fit and well thought-out load compartment cover? This should not only be functional, but also have practical success? We at CARRYBOY are happy to help you!
Expand your double cab pickup truck from 2023+ with a high-quality CARRYBOY cargo area cover from Carryboy. Benefit from our recommended CARRYBOY cargo area cover model 743 from Carryboy for your Ford Ranger double cab from year of construction 2023+. The Ford Ranger tonneau cover seamlessly fits your vehicle. Combine high-quality design with the best protection for your cargo area, without having to forego the classic, beloved style of a pickup truck! The load compartment cover offers your pickup high-quality and convenient protection.
Opt for a tailor-made tonneau cover that comes with a fitting kit and installation instructions. If you have any questions, you can contact us at any time. Let our technically experienced, professionally competent and practically experienced employees install your load compartment cover on request! Benefit from our strong Carryboy load compartment cover model 743 for your Ford Ranger from 2023+.
The entire equipment at a glance:
- for Ford Ranger double cab year of construction from 2023
- CARRYBOY trunk cover manufactured by CARRYBOY
- Material: Vinyl: Black
- Operation: manual
- special feature: easy to open
- particularly suitable for: simple application
- mobile when open
- overlying
- Loading area fully accessible
- Mounting type: rails and drilling
- Surface finish: matte black
- Tension control: automatic
- approximate assembly time: 30-45 min
- Latch & Closure: Velcro and spring clip closure
Our recommendation for your Ford Ranger double cab
Our first-class CARRYBOY cargo area cover 743 from Carryboy for your Ford Ranger from 2023 double cab is suitable for every purpose! It is an ideal tonneau for easy use, protecting and transporting everyday goods.
Use the cover for leisure and business! We recommend a fixed tonneau or roller blind type blind for primarily commercial use.
We recommend checking out our tonneau cover comparison charts :
https://www.novisauto.de/Downloads-Documents/
Our service to you - before and after the purchase
Rely on our service! Questions? uncertainties? Ask us by email or phone! We would be happy to advise you in detail and in a customer-oriented manner . Due to our daily work in the office AND warehouse, as well as our extensive wealth of experience thanks to 16 years of practical work, we are technically adept, technically competent and have practical experience. Our unique spare parts (service) offers you spare parts for several years after product purchase! Your Ford Ranger double cab (Doublecab) from year of construction 2023 is therefore optimally equipped with the load compartment cover model 743. Protect your environment by using our products for life! Cargo area covers from CARRYBOY!
Is sustainability and long-term use of the product important to you? No problem! High-quality materials, parts and raw materials enable our tonneau to have a long service life and useful life. Sustainability is achieved through lifelong use and thus the saving of resources for new production.
High-quality Ford Ranger load compartment cover model 743 - extra cabin from CARRYBOY
The CB-743-FRD tonneau cover for your Ford Ranger opens and closes manually . Thanks to the outstanding advantage of an open, mobile load compartment cover 743 from CARRYBOY for the Ford Ranger, you no longer have to think about whether something fits in the load compartment or not. Just charge, leave the cover open, no problem! The luggage compartment cover can be locked with a spring clamp . Your ranger is thus safely protected from thieves and prying eyes. The Navara load compartment cover is well protected thanks to the integrated locking mechanism. The cover for your Ford Ranger can also be unlocked from the outside .
The load compartment cover is on top . As a result, the 743 cover nestles up against the shape of the flatbed and greatly increases the design, appearance and visual value of your Ford Ranger Double Cab (Doublecab) from 2023+. Mounting with rails and drilling allows for better stability of the load compartment cover. The load compartment cover is particularly secure thanks to rails and drilling.
The 743 cargo area cover from CARRYBOY is made of vinyl: black for your Ford Ranger double cab (Doublecab) year of construction from 2023+. For simple, everyday use in the private sector, vinyl is suitable for your Ranger due to its favorable price-performance ratio. Benefit from longevity, (UV) resistance and easy handling. It takes approximately 30-45 minutes to fit the cover on your Ford Ranger.
The cover has an automatic tension control , so the product always stays tensioned. Enjoy full access from all sides - our tonneau cover will not block access to your cargo area . Load from both sides or the back, depending on your needs.
In summary, the load compartment cover 743 from CARRYBOY for your Ford Ranger double cab (Doublecab) from 2023+ is particularly suitable for simple use . The special feature of the load compartment cover is: easy opening .
Carryboy - load compartment cover lid SX
for Ford Ranger Double Cab (2012+)
- Load compartment lid with gas spring - operation, angle of attack approx. 40°
- insensitive in robust use, thanks to the very stable GRP base material
- ideally suited for an exceptionally long service life, easy to repair
- LED interior light, manual control
- All around - seals lie on the loading sill and seal reliably
- Offer in white primer, also available in body color
- Save up to 15% on fuel with Carryboy
- lockable - two keys incl.
- complete closure of the load compartment with the cover possible, even without a tailgate lock
- Can also be used with over-edge and under-edge load compartment tub
- detailed assembly description - assembly kit included
The SX cargo area cover from CARRYBOY for the Ford Ranger double cab is a solid, functional cover made of unbreakable and stable GRP - glass fiber plastic. The rotary lock with cylinder and set of keys enables the entire Ranger cargo area to be locked securely. The high-quality, thickly laminated GRP material offers a multitude of advantages in daily use: In addition to high resistance to breakage and high stability, it is also very easy to repair when used later.
This Ford Ranger accessory from CARRYBOY is the basis of every load compartment cover: simple, yet very attractive design, quick and easy installation, all-round protection of the load compartment from dust and water. A secure closure of the entire loading space should not be missing from the properties either! The offer is rounded off with an optional paint finish in the vehicle color - the cover can also be supplied with a white primer.
The CARRYBOY flat cover - cover SX for the Ford Ranger double cab has side edges that are curved over the edge of the vehicle. This ensures a secure closure of the entire loading area. All-round seals lie on the loading edge of your vehicle and keep water and dust out of the loading area. Rain drains off the lid on the rim of your Ford Ranger double cab pickup.
The cargo area of your Ford Ranger double cab can be brightly lit with the CARRYBOY lid! The integrated interior light with 2 rows of bright LED lights provides good lighting in the loading area. If this is still not enough, the cargo area can be equipped with our lower edge light system Blight as a further Ford Ranger accessory. The brake light in the driver's cab is always reliably visible!
Be on the safe side with the CARRYBOY cargo area cover SX for the Ford Ranger double cab. We guarantee you a secure supply of spare parts beyond the service range of the vehicle manufacturer.
Please note: This cover is designed for the Ranger XL , XLT (removable front protection grille). An assembly on Limited and Wildtrak is also possible, but then the brackets have to be dismantled. A brake light is not installed in the cab on the Limited and Wildtrak versions.
Price
€850.01*
€2,850.00*
€570.00*
€2,500.00*
€2,250.00*
€2,250.00*
€2,350.00*
€2,955.00*
€2,955.00*
€2,250.00*
€2,250.00*
€2,850.00*
€2,749.99*
€570.00*
€570.00*
€1,775.00*
Construction year
Make/Model
ⓘ Cross arches/slats
-
-
-
-
-
-
-
-
-
-
ⓘ Frame
-
-
-
-
-
ⓘ Height above edge of cargo area
-
-
-
-
-
ⓘ Latch and lock
ⓘ Loading area fully accessible
-
-
-
-
-
-
-
-
-
ⓘ Materials
ⓘ Surface finish
-
-
-
-
-
-
-
-
-
-
-
-
ⓘ approximate assembly time
ⓘ can only be unlocked from the inside
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
ⓘ control
ⓘ installation type
-
-
-
-
ⓘ keep open while driving
-
-
-
-
-
-
-
ⓘ particularly UV-resistant
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
ⓘ particularly suitable for
-
-
-
ⓘ special feature
cabin length vehicle
type of coverage
-
ⓘ color
-
-
-
-
-
-
-
-
-
ⓘ lockable
-
-
-
-
-
-
-
-
-
Assembly
-
-
-
-
-
-
-
-
ⓘ Tension control
-
-
-
-
-
-
-
-
Variant - central locking
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Variant - type of drive
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
ⓘ Interior light
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
ⓘ Water drainage
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Variant - color slats
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
VW Laderaumabdeckungen
Carryboy cover aluminum roller blind 789-VWAD
VW Amarok double cab year 2010-2020
Variant - color slats: Black slats
Carryboy Roller Lid aluminum roller blind CB-789-VWAD for Volkswagen Amarok Double Cab 2010+ Roller Lid - Alupanzer Aluminum roller blind rustproof and easy to use Roller cover can be ordered in black or silver Ergonomic, ribbed grip strip makes operation easier and ensures a good grip even in the rain with lock and key, also locks tailgate weatherproof and moisture resistant, no backwater Save up to 15% on fuel with Carryboy ideally suited for an exceptionally long service life Convenient pull tab ensures convenient operation for a variety of commercial uses Can be used with lower edge - load compartment tub detailed assembly description - assembly kit included only suitable without front protection grille or other roll bars The Rollerlid 789 for the VW Amarok double cab is an aluminum roller blind for retrofitting on your Volkswagen Amarok. The flat roller blind, which ends flush with the loading sill, is attached to the vehicle using fastening rails. All required components are included in the scope of delivery. Permanent installation with a weld seam is recommended to ensure the best seal, but is not essential. The aluminum roller blind from CARRYBOY for the Volkswagen Amarok is available with aluminum-colored slats or completely in matt black. The double-walled aluminum slats are each firmly connected with an articulated hinge with retracted seals. The double-walled design of the individual slats makes the roller blind for the Amarok particularly robust and resilient. The ergonomic grip strip for operating the VW Amarok double cab aluminum roller blind has a good grip thanks to the ribbing - even in wet weather! The Rollerlid 789 for the Amarok double cab is installed flat at the level of the loading sill. Rainwater that falls on the load compartment of the Volkswagen Amarok is safely kept away from the load compartment via drain hoses on the roller blind box and on the tailgate. The CARRYBOY roller blind has a rotary lock with integrated locking hooks for the tailgate. The closure forms a unit with the tailgate of the Volkswagen Amarok double cab and is therefore a secure and flexible closure. The aluminum roller blind 789 is an attractive and flexible Amarok accessory.
Product number: CB-789-B-VWAD
€2,250.00*
Available in 90 days
Delivery from April
Carryboy loading area cover tarpaulin 743-VWAD
VW Amarok double cab year 2010-2020
Carryboy - Softlid 743 cargo area cover Vinyl tarpaulin with Velcro fastener for Volkswagen Amarok Double Cab 2010-2020 Cargo area tarpaulin - plastic-laminated, waterproof and robust Elegant knobbed finish on the surface Anodized aluminum frame with integrated tarpaulin Fixation of the rolled up tarpaulin on three belt buckles All-round seals against water ingress into the cargo area Tarpaulin can be opened from the outside weatherproof and moisture resistant Save up to 15% on fuel with CARRYBOY ideally suited for an exceptionally long service life it is stable and easy to use Can be used with over-edge and under-edge load compartment tub detailed assembly description - assembly kit included The CARRYBOY cargo area cover of the vinyl tarpaulin type for the VW Amarok double cab from year of construction 2010-2020 combines ease of use with an unbeatable price-performance ratio. The load compartment tarpaulin for the Amarok double cab impresses with its elegant appearance and functionality. The simple Velcro system of the vinyl tarpaulin for the Volkswagen Amarok double cab guarantees that the cargo area tarpaulin can be opened and closed quickly. Fastening straps with high-quality quick-release fasteners reliably secure the tarpaulin for the loading area of the Amarok double cab, so that it is also possible to drive with the tarpaulin open. The surface of Carryboy's soft lid consists of a dark gray knobbed surface, which makes this vinyl tarpaulin for the VW Amarok pickup unmistakable. In addition, the tarpaulin provides effective protection against dust and water for your VW Amarok double cab loading area. All-round seals reliably keep the elements away from the cargo area. The load compartment cover 743 of the type "tarpaulin for rolling up with Velcro" has been specially developed for installation with an over-edge load compartment tub. For VW Amarok vehicles without a load compartment liner with edge protection, we recommend a consultation in advance. Installation without drilling is only possible with a trough of the type mentioned. Installation on the Amarok without a tub is also possible. For professional installation in a specialist workshop or on your own, we recommend using blind rivet nuts. Detailed assembly instructions are included.
Product number: CB-743-VWAD
€570.00*
Available in 90 days
Delivery from April
Carryboy Sport Lid SX-VWAD
VW Amarok double cab year 2010-2020
Carryboy - Sportlid SX trunk cover lid with gas springs for Volkswagen Amarok Double Cab 2010-2020 can be moved with ease, thanks to gas springs Save up to 15% on fuel with Carryboy The cover is insensitive in robust, also commercial use ideally suited for an exceptionally long service life reliably closes the entire loading space All-round seals keep the cargo area dry it is stable and easy to use Paintwork in body color possible lockable - two keys incl. easy construction The load compartment cover of the lid type with shock absorbers for the VW Amarok. Secure a long-term supply of spare parts with us. This load compartment cover for the Amarok impresses with its elegant design. As an accessory for the VW Amarok, the SX retains the original shape of the pickup. Don't sacrifice the security of a hard cover for the Amarok. This load compartment cover for the Amarok can be securely locked thanks to a rotary lock with a cylinder. The sides of the cover nestle over the edge of the pickup and therefore not only reliably protect against water, but also close the entire loading area. The construction is uncomplicated and can also be done with a loading space tub. The SX is also available in combination with a matching stainless steel roll bar.
Product number: SX-VWAD
€1,775.00*
Available in 90 days
Delivery from April
Carryboy trunk cover lid with styling bar GRX-VWAD
VW Amarok double cab year 2010-2020
CARRYBOY - load compartment cover Model GRX-VWAD for Volkswagen Amarok double cab (years of construction 2010-2020) with painted roll bar / protective bar with stainless steel inserts can be moved with ease, thanks to gas springs The cover is insensitive in robust, commercial use ideally suited for an exceptionally long service life Base material GRP, therefore particularly stable and easy to repair Offer in white primer, also available in body color securely lockable - two keys incl. locks the entire loading area Save up to 15% on fuel with CARRYBOY Can also be used with over-edge and under-edge load compartment tub detailed assembly description - assembly kit included The GRX cargo area cover from CARRYBOY for the VW Amarok double cab is a stylish but also functional cover. This VW Amarok accessory combines the appealing element of a painted cargo area cover with a polished stainless steel styling bar as a contrast. The optimal mix for the most elegant design on the market! The GRX flat cover for the Volkswagen Amarok double cab adapts seamlessly to the vehicle thanks to the paint finish in the vehicle color. The edges of the load compartment lid are curved over the edge of the vehicle. This ensures that the entire loading area is securely closed. All-round seals lie on the load compartment of your Amarok vehicle and keep water and dust out of the load compartment. Rain drains unhindered through the cover on the edge of your Volkswagen Amarok double cab pickup. The rotary lock with cylinder and set of keys enables the entire loading area to be locked securely. Since the load compartment cover GRX for the Volkswagen Amarok is made in one piece together with the roll bar, there are no rattling parts, unnecessary places for water to enter or unsightly seams. The cargo area of your VW Amarok double cab can be brightly lit with the lid! The integrated interior light with 2 rows of bright LED lights provides good lighting in the loading area. If this is still not sufficient, the loading space can be equipped with our lower edge lighting system Blight as an additional Amarok accessory. The styling bar / roll bar of the cover is shaped in such a way that the 3rd brake light on the driver's cab is always reliably visible. Be on the safe side with the GRX cargo area cover for the VW Amarok double cab (2010-2020). We guarantee you a secure supply of spare parts beyond the service range of the vehicle manufacturer.
Product number: GRX-VWAD
€2,850.00*
Available in 90 days
Delivery from April
NOVISauto cargo area cover roll cover LEXAN OneMX - RECMD23
Maxus T60/T90 Double Cab from 2023+
Rollcover material and resilience: Polycarbonate Reinforced (loadable up to 95kg) [ONE] | Variant - T-slot system for cross bars: Without T-slots [-] | ⓘ color: Black matt [MX] | Variant - type of drive: manual [-]
Are you looking for a precisely fitting and well-designed cargo area cover? It should not only be functional, but also be a practical success? We at NOVISauto are happy to help you! Expand your double cab pickup truck Maxus T60/T90 2023+ with a high-quality NOVISauto cargo cover from Retrax. Benefit from our strong NOVISauto cargo cover model Retrax - ONEMX from Retrax for your Maxus T60/T90 double cab built in 2023+. The tonneau cover is specifically designed for your pickup truck and tailor-made for the Maxus. Unique, high-quality design in pickup style. It offers your pickup comfortable and high-quality protection. The load compartment cover is delivered with a mounting kit and installation instructions and you can optionally watch our assembly videos on YouTube. If you have any questions, you can contact us at any time. If you wish, we can take care of the professional installation of the load compartment cover. Our employees are technically skilled, professionally competent and practically experienced! Benefit from our strong Retrax load compartment cover model Retrax - ONEMX for your Maxus T60/T90 double cab 2023+. Your NOVISauto cargo cover at a glance: for Maxus T60/T90 Double Cab (Doublecab) built 2023+ NOVISauto cargo cover manufactured by RETRAX Material: Polycarbonate (LEXAN): narrow aluminum-reinforced slats without hinges lockable Operation: manual Special feature: Spiral track system for easy rolling up and down, without torsion spring, made from one piece and no seams particularly suitable for: Leisure open mobile particularly UV-resistant ultra-flat scratch-resistant Installation type: without drilling (for: loading area with distance to the rear wall or loading area with rubber plug) Surface finish: matt black, powder-coated Load capacity: 90 kg Approximate assembly time: 75 min Locking & closure: Locking: any position, two-point locking Laying water drain - Black matt [MX] Our recommendation for your Maxus T60/T90 double cab Our first-class NOVISauto cargo cover Retrax - ONEMX from Retrax for your Maxus T60/T90 2023+ double cab is suitable for every purpose! It is an ideal cover for leisure, for the protection and transport of everyday goods. Use the tonneau for leisure and business! We recommend a fixed cover or a roller blind type blind for primarily commercial use. We recommend that you take a look at our comparison tables for load area covers: https://www.novisauto.de/Downloads-Dokumente/ Best service from a single source - before and after the purchase Use our first-class service! Questions? Uncertainties? Contact us by email or phone! Look forward to detailed and customer-oriented advice . We work in the office AND warehouse every day. We have extensive experience over 16 years of practical performance. Look forward to technically skilled, professionally competent and practically experienced employees. Our unique spare parts (service) offers you spare parts several years after the product has been purchased! This means that your Maxus T60 / T90 double cab (Doublecab) built in 2023 is perfectly equipped with the Retrax - ONEMX load compartment cover. Use your load compartment cover for a lifetime and protect the environment! Load compartment covers from NOVISauto! Is long-term use and therefore sustainability important to you? No problem! The use of high-quality materials, raw materials and parts enables our covers to have a long lifespan and service life. It is precisely this lifelong use that enables us to save valuable resources - sustainability through service life! A strong T60/T90 load compartment cover model Retrax - ONEMX - Double Cab from NOVISauto The RE-60151 cargo cover for your Maxus T60/T90 is opened and closed manually . The Retrax - ONEMX cargo cover from NOVISauto for the Maxus T60/T90 can remain open while driving. There is nothing to stop you loading goods higher than the edge of the cargo area! The cargo cover can be locked using a two-point locking system . This protects your goods from theft, water and dirt. Several keys are included to make it easy to open and close your T60/T90 cargo cover. The cargo area cover is ultra-flat . Thanks to its flat design, the Retrax - ONEMX cover for your Maxus T60/T90 double cab (Doublecab) is particularly unobtrusive. The overall impression of your pickup is not disturbed and even increases its stylistic value. Combine the classic look of a pickup and don't miss out on the advantages of cargo area covers! Installation without drilling (with: cargo area tray with a gap to the rear wall or loading area with rubber plugs) enables the cargo area cover to be assembled and disassembled quickly and cleanly without leaving any drill holes. We make no compromises when it comes to strength and safety. The Retrax - ONEMX load compartment cover from NOVISauto for your Maxus T60/T90 double cab (Doublecab) built in 2023+ is made of polycarbonate (LEXAN): narrow aluminum-reinforced slats without hinges . High resilience, robustness, stability and durability are the distinguishing features of polycarbonate (LEXAN) . The T60/T90 Retrax - ONEMX load compartment cover has the best basis for every purpose! Approximately 75 minutes are required to install the cover on your Maxus T60/T90. The durable Retrax - ONEMX load compartment cover from NOVISauto is particularly scratch-resistant . This allows for long-term use in top condition without major signs of wear. Equip your Maxus T60/T90 double cab (Doublecab) with a special, UV-resistant RETRAX Retrax - ONEMX load compartment cover. This increases the lifespan of the cover - it is protected from the sun and fading. The Maxus double cab (Doublecab) cover is lockable . Protection from prying eyes and thieves! Leisure : In summary, the Retrax - ONEMX load compartment cover from NOVISauto is particularly suitable for your Maxus T60/T90 double cab (Doublecab) 2023. Spiral track system for easy rolling up and down, no torsion spring, made from one piece and no seams : these are the special features of the load compartment cover. The Retrax - ONEMX load compartment cover can hold 90 kg . A water drain must be laid during assembly. The Retrax Retrax - ONEMX load compartment cover is delivered in matt black [MX] .
Product number: RE-60338
€2,300.00*
Available in 90 days
Delivery from April
NOVISauto cargo cover G2 - Firm folding - BKFRD23
Ford Ranger & VW Amarok double cab year 2023+
Are you looking for a tailor-made and well-designed cargo area cover? It should not only be functional, but also be a practical success? We at NOVISauto are happy to help you! Our NOVISauto cargo area cover model G2 from BAKFlip offers you many advantages over a bare cargo area and is therefore a useful addition to your double cab pickup Ford Ranger & VW Amarok 2023+. Benefit from our recommended NOVISauto cargo area cover model G2 from BAKFlip for your Ford Ranger & VW Amarok double cab built in 2023. Our cargo area cover for your Ford Ranger & VW Amarok double cab built from 2023 adapts seamlessly to your vehicle. High-quality design - keep your beloved pickup style and appearance and give your cargo area that certain something extra! Best protection against rain and dirt - that is one of the advantages of our cargo area cover. The assembly kit and installation instructions are included. You can also watch our assembly videos on YouTube. If you have any questions, you can contact us at any time. If you wish, we will be happy to professionally install the covers for you. Benefit from our strong BAKFlip load area cover model G2 for your Ranger & Amarok double cab built in 2023. Your NOVISauto cargo cover at a glance: for Ford Ranger & VW Amarok Double Cab (Doublecab) built 2023+ NOVISauto cargo cover manufactured by BAKFLIP Material: Aluminium (jacket) 3rd brake light always visible Operation: manual special feature: basic model particularly suitable for: easy application open mobile particularly UV-resistant flat Loading area fully accessible Mounting type: mounting rails and brackets Surface finish: structured: glossy black Frame: Aluminium: matt black Hinges: EPDM hinge housing Load capacity: 135 kg approximate assembly time: 45-60 min Locking & Closure: Snap closure with pull tab Laying water drain Our recommendation for your Ford Ranger & VW Amarok double cab Our first-class NOVISauto cargo cover G2 from BAKFlip for your Ford Ranger & VW Amarok 23+ double cab is suitable for every purpose! It is an ideal tonneau for simple use, for protecting and transporting everyday goods. Use the tonneau for leisure and business! We recommend a fixed cover or a roller blind type blind for primarily commercial use. We recommend that you take a look at our comparison tables for load area covers: https://www.novisauto.de/Downloads-Documents/ Best service - before and after purchase Use our first-class service! Questions? Uncertainties? You can reach us at any time by email or phone! We will be happy to advise you in detail and in a customer-oriented manner . Through our daily work in the office AND warehouse, as well as our extensive wealth of experience thanks to 16 years of practical performance, we are technically adept, technically competent and practically experienced. We are the only ones in our industry to offer a spare parts service several years after the product has been purchased! This means that your Ford Ranger & VW Amarok double cab (Doublecab) built in 2023+ is perfectly equipped with the load compartment cover model G2. Protect your environment by using our products for a lifetime! Load compartment covers from NOVISauto! Are you worried about sustainability or long-term use? No problem! The use of high-quality materials, raw materials and parts enables our tonneaus to have a long lifespan and service life. Lifelong use saves valuable resources and leads to sustainability! A strong Ranger cargo cover model G2 - double cab from NOVISauto The BK-226342 load compartment cover for your Ford Ranger & VW Amarok is opened and closed manually . The NOVISauto G2 for the Ford Ranger can be driven open . This allows you to load large items without having to remove the cover! Your Ranger load compartment cover can be locked with a snap fastener + pull tab . This protects your items from theft, water and dirt. The Ranger load compartment cover is well protected by the integrated locking mechanism. The cover for your Ford Ranger can only be unlocked from the inside . The cargo area cover is flat . The flat design makes the G2 cover for your Ford Ranger & VW Amarok double cab particularly unobtrusive. The overall impression of your pickup is not disturbed and even increases its stylistic value. Combine the classic look of a pickup and don't miss out on the advantages of cargo area covers! Installation with fastening rails and clips allows the cargo area cover to be more stable. The fastening rails and clips ensure that the cargo area cover sits particularly securely. The shell of our G2 load compartment cover for your Ford Ranger & VW Amarok double cab (Doublecab) built in 2023 is made of aluminum . Aluminum is lightweight and robust . In addition, aluminum is very stable and durable . This makes it an excellent material for the Ranger G2 and is used as required. The third brake light is always visible on the G2 load compartment cover. It takes about 45-60 minutes to install the cover on your Ford Ranger & VW Amarok. The hinges used are EPDM hinge housings . Our BAKFLIP G2 load compartment cover for your Ford Ranger & VW Amarok double cab (Doublecab) offers you special UV resistance . This increases the lifespan of the cover - it is protected from the sun and fading. Enjoy full access from all sides - our load compartment cover does not block access to your load compartment . Load from both sides or the back, as required. In summary, the point " Easy to use " reflects the case for which the G2 cargo cover from NOVISauto is particularly suitable for your Ford Ranger & VW Amarok Double Cab 2023. Basic model : This is the special feature of the cargo cover. The G2 cargo cover can hold 135 kg . You must lay a water drain.
Product number: BK-226342
€1,795.00*
Available in 90 days
Delivery from April
Only 1 available
NOVISauto load compartment cover FLEX - fixed for folding - UCVAD10
VW Amarok double cab year 2010-2020
FLEX is a "tight-to-fold" cover, the optimal solution for your pickup truck. For the Volkswagen Amarok double cab from year of construction 2010. With the FLEX load compartment cover for the VW Amarok, you can drive safely on long stretches of motorway and off-road with the cover closed and open. FLEX is easy to disassemble, requires no drilling during assembly, and sits flat and flush on the top edge of the cargo box. The FLEX flat cover is the "tight-to-fold" cover that protects your luggage from moisture and moisture. It stays dry in the storage space of your VW Amarok double cab - and sure ! Each of the 3 folding elements is made of high-quality solid composite plastic, which is lighter, harder and more break-resistant than aluminium. Each of the panels of the cover consists of a high-density foam core with an aluminum cover. Each FLEX cover is fitted with a profile system to which seals and drainage hoses are connected, so that rain and dirty water is drained off to the side from both the inside and the outside. The loading area of the Volkswagen Amarok is thus protected from dust and large-scale water ingress. The snap-lock system on each foldable element ensures that the cover is held securely and securely and protects the loading space from unauthorized access. The FLEX load compartment cover for folding can be securely locked via the tailgate. The cover can be closed, opened 2/3 or completely open. In any case, you save up to 15% on fuel with the cover installed. A "quick release system" allows full flexibility for using the loading area of the Amarok after the initial installation. If unexpectedly large objects are to be transported, the entire cover can be dismantled in no time at all - and reassembled. It is also ideally suited for use with a living room. All this makes FLEX one of the most popular and best-selling covers worldwide. You can also rely on NOVISAUTO's secure supply of spare parts
Product number: UC-FX71000
€1,605.00*
Available in 90 days
Delivery from April
NOVISauto load compartment cover FLEX - Fixed to fold - UCFRD12
Ford Ranger double cab year 2012+/2019+
FLEX is a "tight-to-fold" cover, the ultimate solution for your Ford Ranger pickup truck. With FLEX you drive safely on long stretches of motorway and off-road with the cover closed and open. FLEX is easy to disassemble, requires no drilling during assembly, and sits flat and flush on the top edge of the cargo box. FLEX is the "tight-to-fold" cover that protects your luggage from wet and damp. It stays dry in the storage space - and sure ! Each of the 3 folding elements is made of high-quality solid composite plastic, which is lighter, harder and more break-resistant than aluminium. In addition, the core is covered with an aluminum cover plate. Each FLEX cover is fitted with a profile system to which seals and drainage hoses are connected, so that rain and dirty water is drained off to the side from both the inside and the outside. All this makes FLEX one of the most popular and best-selling covers worldwide.
Product number: UC-FX21033
€1,605.00*
Available in 90 days
Delivery from April
NOVISauto load compartment cover LOPRO - tarpaulin for rolling - TXVAD10
VW Amarok double cab year 2010-2020
LoPro for the Volkswagen Amarok double cab 2010-2020 is a "tarpaulin to roll up" type load compartment cover - you save 10-15% on fuel costs! The LoPro cargo area cover for the VW Amarok can be rolled up to the cabin and offers 100% full access to the entire cargo area. The special feature of this unique Volkswagen Amarok luggage compartment tarpaulin: The LoPro impresses with its ultra-flat profile and aerodynamic design - the black-colored aluminum arches and side rails complete the look. The high-quality vinyl tarpaulin has multiple secured side seams. Signs of aging after a few months are not to be expected with the LoPro due to the materials used. You can still give the tarpaulin cover additional care with the specially developed "Tonno Tonic" care spray. The spray for the luggage compartment cover is available in our shop. Thanks to the unique clamping system, installation on the Volkswagen Amarok double cab is child's play and requires no drilling. The tarpaulin for the Amarok double cab is installed flush with the loading sill. The tonneau cover can be easily removed and reinstalled in seconds with a click system to allow full flexibility and access to your tonneau area. With the automatic tensioning piston, your Amarok tarpaulin flat cover remains taut even when the temperature fluctuates, so that your transported goods and your cargo area stay dry even in extreme weather. Backwater on the Volkswagen Amarok vinyl cover has no chance. The tarpaulin, which is always taut, drains the water from the loading area. It can drain freely over the sides of the luggage compartment cover. The VW Amarok cover "LoPro" allows you to open and close the tailgate without any problems - thanks to the multifunctional rubber seal, which also represents an effective barrier against rainwater and dust. The LoPro luggage compartment cover for the VW Amarok can only be unlocked from the inside using the operating lever. The cargo area can be completely locked using the lock on the tailgate. The flat, low-profile design of the load compartment cover preserves the "pure" pickup look. The LoPro cover is the ideal multifunctional solution for unlimited use of your VW Amarok pickup truck!
Product number: TX-511201
€875.00*
Available in 90 days
Delivery from April
Only 3 available
NOVISauto load compartment cover LOPRO - tarpaulin for rolling - TXVAD10
VW Amarok double cab year 2010-2020
LoPro for the Volkswagen Amarok double cab 2010-2020 is a "tarpaulin to roll up" type load compartment cover - you save 10-15% on fuel costs! The LoPro cargo area cover for the VW Amarok can be rolled up to the cabin and offers 100% full access to the entire cargo area. The special feature of this unique Volkswagen Amarok luggage compartment tarpaulin: The LoPro impresses with its ultra-flat profile and aerodynamic design - the black-colored aluminum arches and side rails complete the look. The high-quality vinyl tarpaulin has multiple secured side seams. Signs of aging after a few months are not to be expected with the LoPro due to the materials used. You can still give the tarpaulin cover additional care with the specially developed "Tonno Tonic" care spray. The spray for the luggage compartment cover is available in our shop. Thanks to the unique clamping system, installation on the Volkswagen Amarok double cab is child's play and requires no drilling. The tarpaulin for the Amarok double cab is installed flush with the loading sill. The tonneau cover can be easily removed and reinstalled in seconds with a click system to allow full flexibility and access to your tonneau area. With the automatic tensioning piston, your Amarok tarpaulin flat cover remains taut even when the temperature fluctuates, so that your transported goods and your cargo area stay dry even in extreme weather. Backwater on the Volkswagen Amarok vinyl cover has no chance. The tarpaulin, which is always taut, drains the water from the loading area. It can drain freely over the sides of the luggage compartment cover. The VW Amarok cover "LoPro" allows you to open and close the tailgate without any problems - thanks to the multifunctional rubber seal, which also represents an effective barrier against rainwater and dust. The LoPro luggage compartment cover for the VW Amarok can only be unlocked from the inside using the operating lever. The cargo area can be completely locked using the lock on the tailgate. The flat, low-profile design of the load compartment cover preserves the "pure" pickup look. The LoPro cover is the ideal multifunctional solution for unlimited use of your VW Amarok pickup truck!
Product number: TXVAD23-LoPro
€875.00*
Available in 90 days
Delivery from April
Show more details
Only 2 available
NOVISauto load compartment cover ProX - tarpaulin for rolling - TXR09
Dodge RAM Bj. 2009-2018 / Dodge RAM Classic from Bj. 2019+
PX15 is a "tarpaulin-to-roll" tonneau cover - you save 10-15% on fuel costs! The PX15 cover can be rolled up to the cabin and offers 100% full access to the entire cargo area. The PX15 tonneau cover impresses with its ultra-low profile and aerodynamic design - the black aluminum arches and side rails complete the look. Thanks to the unique clamping system, installation is child's play and requires no drilling. The tonneau cover can be easily removed and reinstalled in seconds to allow full flexibility and access to your tonneau area. With the automatic tensioning piston, your tonneau cover stays in place even when temperatures fluctuate, so your cargo and your tonneau area remain dry even in extreme weather. The PX15 cover allows you to easily open and close the tailgate - even with the cover open or closed. Due to the flat, low-profile design of the cover, the "pure" pickup look is retained. The PX15 cover is the ideal multifunctional solution for unlimited use of your pickup truck!
Product number: TX-1431701
€964.99*
Available in 90 days
Delivery from April
Only 1 available
NOVISauto load compartment cover roller blind/blind VW - REVAD10
VW Amarok double cab year 2010-2020
NOVISauto - Pickup cover for the Volkswagen Amarok double cab. Load compartment cover, load compartment roller blind model RETRAX: The roller blind - intelligently designed, masterfully manufactured - quality you can feel ! The construction of the Retrax Rolltops improves the aerodynamics of your pickup so much that you reduce your fuel consumption by up to 10%! Matte or gloss finish - powerful and incredibly scratch resistant your robust and stylish way makes your pickup unique Made from one piece - without hinges to avoid wear and freezing Manufactured from a durable thermoplastic Polycarbonate or also available as an aluminum roller blind - ideal materials for extreme loads in everyday traffic and off-road. easy to handle securely lockable via the tailgate - lockable in any position The load compartment roller blind RETRAX for the Volkswagen Amarok impresses with the flat construction of the cover. The roller blind closes flush with the loading edge, but has enough contact surface on the edge for optimal stability of the cover. The roller blind is set up quickly and easily using clamps. Order the load compartment roller blind in different versions: Either made of a light, but very strong and durable polycarbonate, or in the aluminum roller blind premium version with double-walled slats. The radio control option can also be booked. Would you like to use the loading area of your VW Amarok "double-decker" with the supplied accessories? No problem! Our roller blind also offers crossbar preparation on. Additional Amarok accessories can be mounted on this (e.g. crossbars, roof baskets, bicycle racks and much more).
Product number: REVAD10
€2,300.00*
Available in 90 days
Delivery from April
Show more details
Only 1 available
Tip
NOVISauto load compartment cover SENTRY - tarpaulin for rolling - TXJG20
Jeep Gladiator 2020+ 5 feet
ⓘ Materials: Canvasplane: mattschwarz
Truxedo Sentry is a "tarpaulin to roll up" trunk cover - you save 10-15% on fuel costs! The Sentry cover can be rolled up to the cabin and offers 100% access to the entire cargo area. The Sentry tonneau cover impresses with its ultra-low profile and aerodynamic design - the black aluminum arches and side rails complete the look. Thanks to the unique clamping system, installation is child's play and requires no drilling. The tonneau cover can be easily removed and reinstalled in seconds to allow full flexibility and access to your tonneau area. With the automatic tensioning piston, your tonneau cover stays in place even when temperatures fluctuate, so your cargo and your tonneau area remain dry even in extreme weather. The Sentry cover allows you to easily open and close the tailgate - even with the cover open or closed. Due to the flat, low-profile design of the cover - the "pure" pickup look is retained. The Sentry cover is the ideal multifunctional solution for unlimited use of your pickup truck!
Product number: TX-1531716
€1,900.00*
Available in 90 days
Delivery from April
NOVISauto load compartment cover SOLIDFOLD - Fixed to fold - EXFRD12
Ford Ranger double cab year 2012+/2019+
NOVISauto - Load compartment cover Solid to fold SOLIDFOLD Oversill - Loadspace cover installed on load sill for Ford Ranger Double Cab 2012+ / 2016+ / 2019+ Composite flat cover (aluminum + honeycomb plastic) Aluminum for resilience (270kg) - honeycomb structure for light weight (approx. 20kg) "Enduracoat" protective cover (shockproof, scratchproof, UV-resistant, non-fading) Surface and frame matt black powder-coated All-round seals attached directly to the loading sill drain water off to the side Tailgate can also be operated when the cover is closed Easy to use - easy to use (because it's light) Cover can be locked securely via tailgate lock (spring clamps) Quick and easy assembly and disassembly in 5 minutes (without drilling) 2 driving positions (closed - 2/3 open). Goods can also be loaded in the last third behind the cab up to the height of the loading sill Can be combined with: load compartment tubs over edge / under edge / bedrug / various accessories Guaranteed fuel savings through improved aerodynamics!
Product number: EX-88637
€1,890.01*
Available in 90 days
Delivery from April
Only 1 available
NOVISauto load compartment cover ULTRAFLEX - fixed for folding - UCJG21
Jeep Gladiator from 2020+
ULTRAFLEX is a "tight-to-fold" cover, the optimal solution for your pickup truck. With ULTRAFLEX you drive safely on long stretches of motorway and off-road with the cover closed and open. ULTRAFLEX is easy to disassemble, requires no drilling during assembly, and sits flat and flush on the top edge of the cargo box. Your load is safely protected from moisture and moisture. It stays dry in the storage space - and sure ! Each of the 3 folding elements is made of high-quality solid composite plastic. Each cover is fitted with a profile system to which seals and drainage hoses are connected, so that rain and dirty water is drained off to the side from both the inside and the outside. Aluminum panels with matt black coating Underside coated with needle felt - carpet 3-/4-way foldable can be driven open, fully accessible loading space securely lockable, can only be opened with a snap lock Ultra-flat design is flush with the loading sill Multifunctional seal enables the vehicle flap to be used independently of the cover Including LED light bar on the side clamp mounting
Product number: UC-UX22033
€2,110.42*
Available in 90 days
Delivery from April
Tip
NOVISauto premium hard folding cover MX4 BKFRD12
Ford Ranger Doublecab 2012-2022
BAK MX4 for your Ford Ranger Doublecab 2012-2022 is a premium hard folding tonneau cover - it saves you 10-15% on fuel costs! The BAKFlip MX4 features a durable aluminum matte finish that boasts excellent UV and scratch resistance and an increased density foam core. The MX4 is the upgrade to the G2, equipped with improved latches and an all-new integrated tailgate seal that allows the tailgate to be closed with the cover up or down. BAKFlip MX4 offers all the features of the G2 plus: Improved tailgate operation with premium double seal Durable matte aluminum panels Injection molded lock body for durability. Premium density foam core Extended scratch and abrasion resistance Rated weight up to 200KG evenly distributed weight Why the MX4? The robust year-round pick-up loading area is designed for extreme conditions. Built for everyday use, the MX4's resilient infrastructure includes upgraded components that provide increased resilience to the elements without sacrificing its sleek, low-profile appearance. The look of the "pure" pickup design is retained thanks to the flat, low-profile design of the cover. The cover is the ideal multifunctional solution for universal, year-round use of your pickup truck!
Product number: BK-448342
€1,990.00*
Available in 90 days
Delivery from April
Only 1 available
NOVISauto trunk cover G2 - fixed to fold - BKVAD10
VW Amarok double cab year 2010-2020
Cargo area cover "G2" (aluminium cover) is a "fixed-to-fold" cargo area cover - you save 10-15% on fuel costs! For VW Amarok double cab from year of construction 2010+ The G2 aluminum cover offers 100% full access to the entire load area of the VW Amarok when required, the visibility of the 3rd brake light is guaranteed. When transporting a large load, simply fold the tonneau cover and fold it against the cab. The load compartment cover made of aluminum and other composite materials can be used very flexibly. The durable, solid aluminum sandwich panels are mounted flush with the bed of your Volkswagen Amarok pickup for an extremely low profile design. Thanks to the unique clamping system, installation is child's play. Backwater on the cover is drained out of the truck bed via drain hoses. The new integrated buckle system allows you to keep the tonneau cover open or folded - flipped - closed while driving. The VW Amarok tonneau cover's patented locking system is concealed beneath the tonneau cover - simply latch the tailgate to secure the contents of your flatbed. Premium UV resistance protects your tonneau cover from fading and calcification. The quick release ensures that the cover is easy to put on and take off. Thanks to the flat, low-profile design of the cover, the "pure" Amarok pickup look is retained. The G2 aluminum cover is the ideal multifunctional solution for unlimited use of your VW Amarok pickup truck at the best price-performance ratio. We guarantee you a secure and uncomplicated supply of spare parts for all covers purchased from us. The ideal VW Amarok accessory part.
Product number: BK-26800
€1,795.00*
Available in 90 days
Delivery from April
NOVISauto trunk cover TRIFECTA - tarpaulin for folding - EXVAD10
VW Amarok Double Cab 2010-2020
NOVISauto cargo area cover tarpaulin TRIFECTA for folding for the Volkswagen Amarok Double Cab 2010-2020 Vinyl tarpaulin "Trifecta" for folding Precise processing and selected, resilient materials Thick, high-quality "Heavy Duty" tarpaulin in black with imitation leather embossing Seams secured several times also withstand permanent loads Anodized and black coated aluminum frame Installation without tools within 5 minutes Easy to use with a spring lock Quality seals all around Cover rests on the sill - the seals ensure reliable protection against water and dust Double axle - hinges for commercial use - are not subject to the weather as they are installed under the tarpaulin and protected with seals Lockable with tailgate lock Can be driven open and locked with a convenient lightning bolt buckle Trust our service: even years later you will receive the right spare parts!
Product number: EX-92390
€850.01*
Available in 90 days
Delivery from April
Only 3 available
NOVISauto trunk cover TruXport - tarpaulin for rolling - TXR09
Dodge Ram Bj. 2009-2018 / Dodge RAM Classic from Bj. 2019+
TruXport for Dodge Ram is a "tarpaulin-to-roll-up" tonneau cover - you save 10-15% on fuel costs! The TruXport cover can be rolled up to the cabin and offers 100% access to the entire cargo area. The TruXport load compartment cover impresses with its ultra-flat profile and aerodynamic design. The tonneau cover can be easily removed and reinstalled in seconds to allow full flexibility and access to your tonneau area. The TruxPort cover allows you to easily open and close the tailgate - even when the cover is open or closed. The flat, low-profile design of the cover preserves the "pure" pickup look. The TruXport cover is the ideal multifunctional solution for unlimited use of your pickup truck!
Product number: TX-231701
€590.00*
Available in 90 days
Delivery from April
Tip
NOVISauto trunk cover X4 tarpaulin for rolling BKR19 - Dodge
Dodge Ram 2019+ New Body Style
BAK Revolver X4 for your RAM is a "fixed-to-roll" type tonneau cover - saving you 10-15% on fuel costs! The turret roller blind cover for your RAM consists of a heavy-duty, coated and load-bearing roller blind, which is supported by many interlocking aluminum cross panels with a surface vinyl structure. The design impresses with the incomparable matt black look when unrolled. The roll-up cover of the "fixed-to-roll" type can be rolled up to the cabin and offers 100% full access to the entire loading area. Due to the closely spaced aluminum transverse panels absolute safety guaranteed even while driving, whether rolled up or closed. Operation with one hand is possible. The Revolver X4 "fixed-to-roll" roller blind impresses with its ultra-flat profile and aerodynamic design. Thanks to the clamping system, assembly is easy and requires no drilling. The tonneau cover can be easily removed and reinstalled. This allows full flexibility and access to the loading area. Closing the cover also closes the tailgate. The look of the "pure" pickup design is retained thanks to the flat, low-profile design of the cover. The cover is the ideal multifunctional solution for universal, year-round use of your pickup truck!
Product number: BK-80342
€2,085.00*
Available in 90 days
Delivery from April
Passendes Zubehör
Tailgate Seal MAX-SEAL - Dust and splash protection
seals, keeps dust, rain and snow out of your truck bed
NOVISAUTO pickup tailgate seal MAXSEAL for all common EU and US pickup vehicles: NOVISauto tailgate seal "MAX SEAL" keeps your pickup loading area free from dust, rain and snow - this EPDM sealing tape (ethylene propylene diene) is a foil-shaped, synthetic rubber, a material according to DIN EN 13956 that is often used for roof and facade seals, used for pond sealing. The tailgate seal MAX - SEAL is up to 500% stretchable, permanently elastic (even at temperatures between -40 degrees Celsius and +120 degrees) and has a life expectancy of decades. The MAX - SEAL tailgate seals are resistant to aging and ozone without additional surface protection. They are UV and IR stable and resistant to a variety of chemical media. (Source: from Wikipedia). Max Seal is easy to install in minutes using a do-it-yourself method - simply cut and glue the ends! - The band is long enough and suitable for all pickup trucks with a tonneau cover or hard top. Equip your pickup with a tailgate seal from CARRYBOY / NOVISAUTO. This means that water and dust no longer have any chance of entering the pickup cargo area. The easy, quick and convenient way to seal your tailgate yourself.
Product number: MAX-SEAL
€67.50*
Available in 90 days
Delivery from April
Care spray for tarpaulins - cargo area covers EX-TONNO TONIC
for all truck cargo area covers and tarpaulins
NOVISauto care spray "TONNO TONIC" for all luggage compartment covers and tarpaulins made of ABS hard plastic and vinyl. Tonno Tonic cares, cleans and gives your cover a fresh shine in a single step - it effectively protects against UV light. Tonno Tonic has been thoroughly tested and is 100% suitable for protecting all ABS hard plastic and vinyl covers. Remember to take care of your cover regularly! - she will thank you with a good, fresh appearance and a long life! Tonno Tonic protects against harsh weather, cold winter and hot summer days. For care, simply spray Tonno Tonic on the previously cleaned tarpaulin. Wipe the surface dry with a clean cloth. Feel free to use Tonno Tonic to clean your tires - please wait 5 minutes after spraying before you can wipe the tire surface dry. Your rims will not be damaged. Tonno Tonic is available in a 0.47 liter spray bottle or as a 6-pack for dealers.
Product number: EX-TONNO TONIC
€35.00*
Available in 90 days
Delivery from April
Ford Zubehör
Huckepack Camping Setup Kit 'N Kaboodle for Pickups
for all pickups
Camping Aufbau Level: Kit 'N Kaboodle
The Kit 'N Kaboodle Huckepack camping pickup truck with the highest specification has everything you can imagine for being on the road for several weeks or longer without permanent accommodation. Go on a multi-week road trip across the country without any problems, drive to Spain and then back via Italy and stop wherever you like. Don't set yourself any limits, because our camping setup doesn't set any for you! In the truest sense of the word, our motto is "Freedom on wheels", because with our construction the world can become your home! The structure is quick and easy to pack and unpack - you can travel from one place to another in just a few minutes. The Aqualon tent provides reliable protection from wind and weather, allows light and solar heat to pass through - at the same time it is a tried and tested material from sailing ship construction. The main function of the basic version - a good night's sleep and good rest - is taken care of. A hammock and mattresses are included. The side, retractable entry ladder makes it easy to enter and exit the structure. Our high quality ensures a very long service life over several pickups. We only use the best materials such as stainless steel, use high-precision machines for perfect laser cutting and intelligent solutions such as a floor with water drainage. In addition, all exterior materials are powder-coated black and the interior is powder-coated gray. Of course, your safety should not be neglected. A fire extinguisher and a smoke and CO2 alarm are naturally included. Make your dreams come true and let there be no limits to your freedom!
Product number: SW10230.2
Price on request
Available in 90 days
Delivery from April
Show more details
Huckepack Camping Setup Skin 'N Bones for Pickups
for all pickups
Camping Aufbau Level: Skin 'N Bones
The mid-range Huckepack camping pickup structure allows you to camp comfortably without having to forego comfort. It gives you that little extra on your adventures. Have everything you need on board! Head east for a long weekend or enjoy a 7-day holiday in France. How about a "road trip" based on the American model? A different stop every day, no hotel required - you, the road, the camping setup and of course nature and adventure! Don't worry about running out of space - a unique advantage of our bodies is that there is still storage space between the body and the pickup bed - load your accessories without having to have a trailer! Our motto "Freedom on wheels" says it all. Enjoy the opportunity to go anywhere. Our high quality ensures a very long service life over several pickups. We only use the best materials such as stainless steel, use high-precision machines for perfect laser cutting and intelligent solutions such as a floor with water drainage. In addition, all exterior materials are powder-coated black and the interior is powder-coated gray. Your safety is our top priority! A fire extinguisher and smoke and CO2 alarms are of course included. Make your dreams come true and let there be no limits to your freedom!
Product number: SW10230.3
Price on request
Available in 90 days
Delivery from April
Show more details
Only 2 available
Huckepack camping construction base for pickups
for all pickups
Camping Aufbau Level: Basisausstattung
The basic version of the Huckepack camping pickup structure combines everything you need to experience a short adventure. Drive to the North Sea for the weekend and listen to the sound of the waves. How about a 4 to 5 day short trip to the Black Forest and enjoy the peace and quiet while the forest and nature embrace you? Our motto "Freedom on wheels" is our motto. Enjoy the opportunity to go anywhere. Even the basic version is generously equipped and covers all your basic needs so that nothing stands in the way of your trip. The structure can be packed and unpacked quickly and easily - you can travel from one place to another in just a few minutes. The Aqualon tent provides reliable protection from wind and weather, allows light and solar heat to pass through - at the same time it is a tried and tested material from sailing ship construction. The main function of the basic version - a good night's sleep and good rest - is taken care of. A hammock and mattresses are included. The side, retractable entry ladder makes it easy to enter and exit the structure. Our high quality ensures a very long service life over several pickups. We only use the best materials such as stainless steel, use high-precision machines for perfect laser cutting and intelligent solutions such as a floor with water drainage. In addition, all exterior materials are powder-coated black and the interior is powder-coated gray. Of course, your safety should not be neglected. A fire extinguisher and a smoke and CO2 alarm are naturally included. Make your dreams come true and let there be no limits to your freedom!
Product number: SW10230.1
Price on request
Available in 90 days
Delivery from April
Show more details
Care spray for tarpaulins - cargo area covers EX-TONNO TONIC
for all truck cargo area covers and tarpaulins
NOVISauto care spray "TONNO TONIC" for all luggage compartment covers and tarpaulins made of ABS hard plastic and vinyl. Tonno Tonic cares, cleans and gives your cover a fresh shine in a single step - it effectively protects against UV light. Tonno Tonic has been thoroughly tested and is 100% suitable for protecting all ABS hard plastic and vinyl covers. Remember to take care of your cover regularly! - she will thank you with a good, fresh appearance and a long life! Tonno Tonic protects against harsh weather, cold winter and hot summer days. For care, simply spray Tonno Tonic on the previously cleaned tarpaulin. Wipe the surface dry with a clean cloth. Feel free to use Tonno Tonic to clean your tires - please wait 5 minutes after spraying before you can wipe the tire surface dry. Your rims will not be damaged. Tonno Tonic is available in a 0.47 liter spray bottle or as a 6-pack for dealers.
Product number: EX-TONNO TONIC
€35.00*
Available in 90 days
Delivery from April
Only 3 available
NOVISauto EX-CCLEATS lashing clamps for all pickup models
for the pick-up platform
NOVISauto lashing clamps "CARGO CLEATS" - an ingeniously simple lashing system for your pickup loading box - installed in minutes ! the optimal alternative for backup of your transported goods! No drilling is required to attach the cleats anywhere on the top edge of the cargo box side walls. No damage to paint or sheet metal during installation and under load. The cleats are made of plastic-coated glass, so they are extremely durable and will not rust. Loads of up to around 200 kg are possible and can also be used for most of our luggage compartment covers. Additional CARGO CLEADS are required for larger loads: always use more CARGO CLEATS to secure your cargo than necessary! - - Sold in pairs, information on attachment and application options, such as tips for knotting, for optimal loading is included. To note: CARGO CLEATS cannot be used with load compartment tubs that are over the edge (overrail tubs) - unless the tub is cut out at the relevant attachment points. CARGO CLEATS is not suitable for plastic-coated cargo boxes.
Product number: EX-CCLEATS
€42.25*
Available in 90 days
Delivery from April
CARRYBOY luggage net model CB-999
Supplement to Carryboy roof baskets
Dimensions: 90x90 cm
Item No. CB-999 CARRYBOY - Luggage net - Article 999 the right addition to Carryboy roof baskets - in sizes 90 x 90 cm / 90 x 110 cm / 90 x 150 cm - UV and weather resistant - with hooks for quick, uncomplicated attachment - with carry bag - Best material and processing quality - unbreakable and resilient CARRYBOY has been building accessories for small pickup trucks: hardtops, tonneau covers, roll bars, running boards, roof racks, bumpers since 1969. We build hundreds of hardtops and tonneau covers and much more every day, which are sold in more than 150 countries worldwide. If you have any questions, please contact us by telephone on 02151-393593 or by e-mail at info@carryboy.de Please ask for the exact delivery time
Product number: CB-999.3
€55.00*
Available in 90 days
Delivery from April
NOVISauto joint sealing tape model MA sealing tape
between hardtop and pick-up platform - all brands - all models - all years of construction
NOVISauto - pre-compressed, permanently elastic joint sealing tape for sealing the joint between the hard top or load compartment cover and the vehicle load box. Seals reliably with joint widths between 4 mm and 9 mm when expanded. The foam rubber is placed on the cleaned bottom edge of the upright hard top / tonneau cover glued on, previously trimmed a little at the ends. Then the hard top / cargo area cover is carefully aligned on the upper edge of the vehicle cargo box and fixed using the existing aluminum clamps. A detailed assembly description is enclosed with the delivery.
Product number: MA-Dichtband
€58.00*
Available in 90 days
Delivery from April
Tailgate Seal MAX-SEAL - Dust and splash protection
seals, keeps dust, rain and snow out of your truck bed
NOVISAUTO pickup tailgate seal MAXSEAL for all common EU and US pickup vehicles: NOVISauto tailgate seal "MAX SEAL" keeps your pickup loading area free from dust, rain and snow - this EPDM sealing tape (ethylene propylene diene) is a foil-shaped, synthetic rubber, a material according to DIN EN 13956 that is often used for roof and facade seals, used for pond sealing. The tailgate seal MAX - SEAL is up to 500% stretchable, permanently elastic (even at temperatures between -40 degrees Celsius and +120 degrees) and has a life expectancy of decades. The MAX - SEAL tailgate seals are resistant to aging and ozone without additional surface protection. They are UV and IR stable and resistant to a variety of chemical media. (Source: from Wikipedia). Max Seal is easy to install in minutes using a do-it-yourself method - simply cut and glue the ends! - The band is long enough and suitable for all pickup trucks with a tonneau cover or hard top. Equip your pickup with a tailgate seal from CARRYBOY / NOVISAUTO. This means that water and dust no longer have any chance of entering the pickup cargo area. The easy, quick and convenient way to seal your tailgate yourself.
Product number: MAX-SEAL
€67.50*
Available in 90 days
Delivery from April
Only 8 available
NOVISauto workshop mat / gardening mat padded and waterproof
Work mat for everyday use
NOVISauto - knee-friendly anti-slip mat, padded and insulated for workshop or garden work VERSATILE USE - Work mat for professional or DIY needs dimensionally stable, extremely hard-wearing and durable Generous foaming - therefore well padded and insulated towards the bottom Waterproof and quick drying Comfortable non-slip surface with coarse polypropylene needle felt (ideal for kneeling or lying down) Easily remove dirt with a garden hose or by knocking it out Practically stowed - folds in the middle Unfolded 60cm*120cm in size Ultra tough product made from 100% recyclable polypropylene
Product number: BR-TW2x4MAT
€70.00*
Available in 90 days
Delivery from April
Only 1 available
NOVISauto Tailgate Pads Knee Pads VW Amarok - BRVAD10
VW Amarok Double Cab 2010-2020
Our TAILGATEMAT is the perfect addition to a standard tub. No more awkward kneeling on the hard tub - no more dull rippled appearance like a standard tub. You are making the right choice with the tailgate mat for your VW Amarok double cab, model year 2010-2020. The TAILGATE MAT for the Amarok is installed in minutes. Thanks to the Velcro fastener, the tailgate mat can be removed and installed in a very short time. The padded anti-slip mat for the tailgate of the Volkswagen Amarok pickup is made from the same material as a "normal" standard tub. The load compartment mat is therefore just as easy to care for, robust and practical - thanks to its unique advantages it is even more practical than the standard liner. Perfectly adapted to your pickup truck, the BEDMAT is resistant to a wide range of acids and loads and is made from a single piece. The BEDMAT for your Amarok double cab 2010-2020 can also be combined with a "standard" tub. Ideally suited if you often have to climb onto the hold. Your knees will thank you for the comfortable surface and additional padding.
Product number: BR-BMR24TG
€125.00*
Available in 90 days
Delivery from April
Only 1 available
NOVISauto Tailgate Pads Knee Pads Ford Ranger - BRFRD12
Ford Ranger Double Cab 2012+/2019+
Variant - Bedliners version: tailgate | cabin length vehicle: double cab
Our BEDMAT is the perfect alternative or addition to a tub. No more awkward kneeling on the hard tub - no more dreary rippled appearance like a standard tub - no more shifting of the load while driving. With BEDRUG for your Ford Ranger 2012+/2019+ you make the right choice. The BEDMAT for the Ranger double cabin is installed in minutes. Thanks to the Velcro fastener, the load compartment mat or carpet can be removed and installed in a very short time. The BEDMAT load compartment carpet for the Ford Ranger double cab pick-up truck is made of the same material as a "normal" standard tub. The load compartment mat is therefore just as easy to care for, robust and practical - thanks to its unique advantages it is even more practical than the standard liner. Custom-fitted to your pickup truck, the BEDMAT is resistant to a wide range of acids and stresses and is made from a single piece. Preserve and protect your load compartment liner and paintwork. The BEDMAT can also be combined with a "standard" tub. Fits: Spray Tub/No Tub Tailgate part not included! --> order separately: Tailgate Installation with tub not possible --> can be ordered, if required, send us an e-mail
Product number: BR-BMR12TG
€125.00*
Available in 90 days
Delivery from April
NOVISauto LED light system EX-BLight for all vehicle models
for the flatbed of all pickup trucks
NOVISauto – B-Light / B-Light is the ultra-bright lighting for your pick-up loading area made of 8 brightly lit LED units, each with 6 LED bulbs. B-Light fits all pickup trucks and models - B-Light brightly illuminates the entire cargo area of your pickup - There is only one switch for the whole light system. B light is suitable for all pickups with any cargo area covers or hardtop. To protect against slipping loads, B-Light should be mounted under the U-rail on the side.
Product number: EX-BLight
€130.90*
Available in 90 days
Delivery from April
Only 3 available
Boot lid protection strip Ford Ranger - BWFRD12
Ford Ranger 2012+
NOVISauto - edge protection for the pickup tailgate of your Ford Ranger from year of construction 2012+ Effectively and inexpensively protect the scratch-prone upper edge of the tailgate of your 2010-2020 Ford Ranger! The NOVISAuto protective strip for the Ford Ranger tailgate offers long-lasting and very effective protection against scratches in the paintwork. Ideally suited if you already have a built-in loading space liner without edge protection or if the loading space is protected with a coating - because the edges of the loading area are still unprotected with both systems! The protective cap / rubbing strip for the Ford Ranger tailgate was developed for lasting protection against scratches, dents and dents. A close fit with smooth machined edges and durable plastic material make our Ford Ranger Edge Cover Moldings an excellent addition to your vehicle. The thickness of the edge protection is 3mm, up to 4mm in particularly stressed areas. The NOVISAuto Bushwacker protective strip is made of high-quality DURA-FLEX 2000 plastic. This plastic is very durable, impact and scratch-resistant and designed for all seasons. Harmful sun rays cannot harm your plastic edge protection, because the material does not fade. The surface is visually and haptically appealing with a slightly rough black surface.
Product number: BW-28512
€132.99*
Available in 90 days
Delivery from April
Pickup storage bag Saddlebag cargo area driver's side
for all pickup vehicles
Saddlebag - Tool storage bag for all pick-up holds, soft material The ultra-practical storage bag for tools, sporting goods and lots of small items for the driver's side of your pick-up The Novisauto saddlebag has been specially made for each open-rail pick-up bed and is mounted on the rails of selected bed covers for maximum compatibility. Alternatively, the stowage bag can also be attached to the inside edge of the cargo area using clamps. With some vehicles (e.g. Nissan Navara) the lashing system can also be used to attach the tool storage bag if the loading sill is covered. The Saddlebag consists of two loading levels. The lower level features a zip closure and exterior pockets. Heavy-duty inserts ensure lasting strength and a tailored appearance. Lift, take off and take away in a single operation, always and at hand on every occasion. You take the saddlebag with you to your workplace - together with all inserted tools and assembly parts! In the platform, you fix the storage box to save space on the side between the platform flap and the wheel housing.
Product number: TX-SADDLEBAG
€140.00*
Available in 90 days
Delivery from April
Carryboy CB-111-FR tailgate damper gas spring €165.01*
for Ford Ranger all lengths 2012+
More properties: Dämpfer: federt Auf- & hilft beim Zumachen
Equip your Ford Ranger extra cab (Spacecab), double cab or single cab (Singlecab) built in 2023+ with a CARRYBOY tailgate damper 111. Increase the usability of your pickup and increase comfort. With accessories from the Comfort & Ease of Use section. Ford Ranger accessories seamlessly adapt to your vehicle. Opt for a bespoke accessory that comes with a mounting kit and installation instructions. If you have any questions, you can contact us at any time. If you wish, we would be happy to professionally assemble the accessories for you. Take advantage of our strong CARRYBOY accessory model tailgate damper 111 from Carryboy for your Ford Ranger extra cab (Spacecab), double cab or single cab (single cab) built in 2023+. Your advantages summarized: for Ford Ranger extra cab/1.5 cab (Kingcab), double cab (Doublecab), single cab (Singlecab) year of construction from 2023+ CARRYBOY accessories manufactured by CARRYBOY Accessories designed for comfort & ease of use - black Mounting type: screws approximate assembly time: 10 min special feature: easy opening and high compatibility particularly suitable for: convenient use and simple application Attaches to tailgate and side Storage space approx. 0.5 m³ Our recommendation for your Ford Ranger Extra Cab (Spacecab), Double Cab, Single Cab (Singlecab) Our first-class CARRYBOY accessory tailgate damper 111 from Carryboy for your Ford Ranger 2023+ extra cabin (Spacecab), double cabin or single cabin (Singlecab) is suitable for every purpose! It is an ideal accessory for convenient use and easy application. Use the accessories for leisure and business! Best service - before and after the purchase You can rely on our service! Uncertainties or questions? Ask us by email or phone! We would be happy to advise you in detail and in a customer-oriented manner . Due to our daily work in the office AND warehouse, as well as our extensive wealth of experience thanks to 16 years of practical work, we are technically adept, technically competent and have practical experience. Are you concerned about sustainability or long-term use? No problem! The use of high-quality materials, raw materials and parts enables our accessories to have a long service life and useful life. Sustainability is achieved through lifelong use and thus the saving of resources for new production. More comfort and increased user-friendliness with CARRYBOY tailgate dampers 111 The accessory Carryboy tailgate damper 111 is delivered in black . The Carryboy CB-111-FT tailgate damper gas pressure spring is installed on the tailgate, on the side . The approximate installation time is 10 minutes on your Ford Ranger. Mounting with screws allows for better stability of the accessories. The accessory is particularly secure thanks to screws. The special features of the accessories are: easy opening and high compatibility . Convenient to use and easy to use : in summary, the CARRYBOY tailgate damper 111 accessory for your Ford Ranger extra cab/1.5 cab (Kingcab), double cab (Doublecab) or single cab (Singlecab) from 2023+ is particularly suitable for this.
Product number: CB-119-FR
Variants from €106.99*
Available in 90 days
Delivery from April
Carryboy CB-111-FT tailgate damper gas spring €165.01*
for Ford Ranger all lengths 2012+
More properties: Dämpfer: federt Auf- & hilft beim Zumachen
CARRYBOY tailgate damper CB-111 on Stabilus - shock absorber base for Ford Ranger 2012+ for Ford Ranger 2012+ Double Cab / Extra Cab / Single Cab Simple installation on existing screw connections and threads two stable, matt black coated brackets for chassis and tailgate durable Stabilus gas pressure damper The tailgate slowly slides open into the end position Tailgate damper prevents the tailgate from accidentally "falling down". suitable with all accessories, as it is installed directly in the cavity between the side wall and the tailgate
Product number: CB-119-FT
Variants from €106.99*
Available in 90 days
Delivery from April
Carryboy tailgate damper combination system CB-105-FTW gas spring + cable
for Ford Ranger 2012+ all lengths
CARRYBOY tailgate damper combination system CB-105-FTW for Ford Ranger 2012+ all bed lengths The pickup tailgate damper system CB-105 combines the advantages of the tailgate cable "Slingup" CB-777 with the advantages of the tailgate gas spring CB-111. Tailgate damper with two stable brackets is anchored to existing screw points, so no drilling is necessary Robust Stabilus gas pressure spring brakes the movement of the tailgate when opening and reliably prevents the pick-up platform flap from "falling down". The pick-up tailgate slowly slides open when opening and moves gently into the end position The tailgate sling-up cable saves the energy when the tailgate is opened and releases it again in a controlled manner when it is closed - noticeable support even when closing the tailgate The tailgate damping can be infinitely adjusted with an open-end wrench For Ford Ranger 2019+ please note: The tailgate cable CB-777 Slingup is attached to the car with a specially made bracket. The holder is no longer suitable for original Ford Ranger load compartment tubs with a "large bulge" behind the tailgate on the sides. The system can be used without restrictions on vehicles without a tub or on Ford Ranger pickups with an original cargo area tub built between 2012 and 2018. It can also be used on vehicles with a spray coating, so-called "elephant skin". If you have any questions or are unclear, we can immediately make a recommendation with a photo of the loading area with the tailgate open. For vehicles with tubs from 2019, we only recommend using the CB-111-FT gas spring system (springing when opening the tailgate).
Product number: CB-105-FTW
€169.50*
Available in 90 days
Delivery from April
Only 1 available
NOVISauto side edge protection for loading area BWFRD12 - Ford
for Ford Ranger double cab from year 2012+
NOVISauto - edge protection for the pick-up loading sill on the right and left of your Ford Ranger double cab from year of construction 2012+ Protect the scratch-prone upper edge of the loading area of your Ford Ranger double cab effectively and inexpensively. The NOVISAuto protective strips for the Ford Ranger sides offer long-lasting and very effective protection against scratches in the paintwork. Ideally suited if you already have a built-in cargo area liner without edge protection or the cargo area is protected with a coating - because the edges of the cargo area of your Ford Ranger are still unprotected with both systems! The protective cap for the Ford Ranger side loading sills was developed for lasting protection against scratches, dents and dents. A close fit with smooth machined edges and durable plastic material make our Ford Ranger Edge Cover Moldings an excellent addition to your vehicle. The thickness of the edge protection is 3mm, up to 4mm in particularly stressed areas. The NOVISAuto Bushwacker protective strip is made of high-quality DURA-FLEX 2000 plastic. This plastic is very durable, impact and scratch-resistant and designed for all seasons. Harmful sun rays cannot harm your plastic edge protection, because the material does not fade. The surface is visually and haptically appealing with a slightly rough black surface.
Product number: BW-28511
€255.01*
Available in 90 days
Delivery from April
Only 3 available
CARRYBOY cross member model 558
for all Carryboy hardtops
CARRYBOY - aluminum cross member elliptical shape for mounting on all CARRYBOY hardtops with roof rails Length of the crossbars 125 cm Sturdy aluminum with a satin finish Including rubber insert Including attachments (matching feet) for the hardtop roof rails Can be attached to the hardtop without drilling When ordering, please name the built-in hardtop / cargo area roller blind - model The crossbars are ideal for attaching the CARRYBOY roof baskets - available in 5 different sizes.
Product number: CB-558-00
€275.00*
Available in 90 days
Delivery from April
NOVISauto AutoSafe vehicle safe for permanent installation in vehicles
for all vehicles with enough space - permanently installed
NOVISauto - LOCKBOX - AutoSafe for permanent installation The compact security box from NOVISauto offers convenient protection for your valuables in the vehicle. The steel container with a thick wall - lockable with a key or combination lock - is permanently attached to the vehicle and offers optimal protection for documents, tablets, laptops, cash and much more. Are you obliged to remove all valuables from the car? The car safe offers a more convenient storage option for all valuable goods in the vehicle. Also ideally suited as camping equipment, installation for caravans, mobile homes and pickups - residential structures. The only condition for installation: There must be enough space for the safety box. Standard equipment: Unique vehicle safe for installation in all vehicles with enough space Installation: Bolt to vehicle using SAE J429 Grade 8 Fastening Kit (One of the highest tensile strength alloy steels available) Use: Sales staff in the field and as camping equipment for caravans, residential structures or as a lockable security box for valuable tools Robust workmanship and strength: 1.3 mm thick steel - welded all around - matt black powder-coated Lid with seal and continuous hinge - powder-coated Standard lock: Exclusive lock for double-bit keys with 10 tumblers Alternative lock: 3 digit combination with rotary lock without key (see accessories) External dimensions: 159mm length // 400mm width // 257mm height Internal dimensions: 146mm length // 384mm width // 248mm height
Product number: TU-02901
€374.90*
Available in 90 days
Delivery from April
Show more details
NOVISauto padded anti-slip mat with tailgate protection and hinge protection - BRF14-5.7 €470.00*
Ford F150 2015+/2021+
Length of truck bed: 5ft 7in // 1702mm | Variant - Bedliners version: BEDMAT XLT
Our BEDMAT is the perfect alternative or addition to a tub. No more awkward kneeling on the hard tub - no more dreary rippled appearance like a standard tub - no more shifting of the load while driving. With BEDRUG for your Ford F150 2014+ you make the right choice. The BEDMAT for the F150 is installed in minutes. Thanks to the Velcro fastener, the load compartment mat or carpet can be removed and installed in a very short time. The BEDMAT load compartment carpet for the Ford F150 pickup truck is made of the same material as a "normal" standard tub. The load compartment mat is therefore just as easy to care for, robust and practical - thanks to its unique advantages it is even more practical than the standard liner. The BEDMAT is perfectly adapted to your pickup truck, is resistant to a wide range of acids and loads and is made from a single piece. Take care of and protect your load compartment liner and the paintwork. The BEDMAT for your Ford F150 2014+ can also be combined with a "standard" cot. Fits: Spray Tub/No Tub Tailgate part not included! --> order separately or model XLT Installation with tub not possible --> can be ordered, if required, send us an e-mail
Product number: BR-XLTBMQ15SCS
Variants from €375.00*
Available in 90 days
Delivery from April
Only 4 available
NOVISauto padded anti-slip mat BEDMAT - can be cut to size universal size 250cm*170cm
for all pickup vehicles
NOVISauto - bed mat model BedMat in universal size for all common and non-common pickup models (also for special editions, extended vehicles) The NOVISAuto anti-slip pickup floor mat for the loading area is a perfect addition to your pickup. The anti-slip mat from NOVISAuto not only impresses with its properties as a non-slip accessory for the loading area, but also as an instrument for visually enhancing your loading area. The Bedmat is an integrated system made of permanently stable and durable materials. The surface of the anti-slip mat is covered with a comfortable but easy-care artificial carpet. This carpet provides the anti-slip properties and can be kept clean with a high-pressure cleaner or a hand brush. The base of the anti-slip mat for your pickup is made from 100% recycled polypropylene. The material is foamed and applied in 3 separate layers. In combination with the carpet surface, this ensures a unique protection factor against chemicals, dust & dirt, impacts and point loads. The padding and underlay also make work on the loading area easier. The surface prevents objects that are transported on the loading area from slipping. The NOVISAuto Bedmat model can be universally installed in all pickup vehicles. Perforations for US - full-size pickups (e.g. Dodge RAM, Ford F150) are already in place. For other less common vehicles, the mat can easily be cut to size with a sharpened box cutter. The dimensions of 170cm width and 250cm length allow installation in almost all pickup - loading areas. It can be installed either on a cargo area liner, on a spray coating or on the bare surface of the cargo floor. Appropriate adhesive pads with Velcro are included in the delivery. Ideally suited for extra cab or singlecab pickups (Toyota Hilux singlecab, VW Amarok singlecab, Ford Ranger singlecab, Ford Ranger extra cab, Toyota Hilux extra cab, Nissan Navara extra cab, Isuzu D-Max extra cab) or individual loading area extensions (e.g. by the company Veeth in the Netherlands ). universally applicable for all models Dimensionally stable, extremely hard-wearing and durable - therefore the best protection against scratches and damage to the loading area Protection against negative environmental influences (e.g. chemicals, acids, rust, etc.) easy to assemble - no drilling required in the vehicle platform ideally suited for an exceptionally long service life stable and easy to use continuous fabric between loading area and tailgate against unwanted deposits Anti-slip surface for safe transport This is the most innovative and unique load compartment liner there is. You get the look and comfort of a rug in an ultra-tough 100% polypropylene product. Thus, your loading area is not only protected against impacts and damage, but the bed liner also withstands stresses from gravel to battery acid.
Product number: BR-BMX00D
€375.00*
Available in 90 days
Delivery from April
Only 6 available
Tool box 'SwingCase' SC203 - swing out - UCF14
Ford F150 2014+
Variant - Alignment/Side: passenger side
NOVISauto – SwingCase for the Ford F150 2014+ / 2021+ pickup The ultra-practical box for tools, sporting goods and lots of small parts! You can reach your tools and small parts by effortlessly detaching your SwingCase box from the holder with just one movement and swiveling it towards you. No slouching or "bunk climbing" is more needed! NOVISauto, the market leader in selling popular Ford F150 / Ford F250 accessories, builds these versatile storage boxes out of high-impact ABS hard plastic for your convenience - strong enough for a long F150 truck life. SwingCase is "tough", it is waterproof, space-saving and therefore ideally suited for your Ford F150. – Purchasing two SwingCases for both sides of your Ford F150 / F250 platform wall is the best choice - space-saving, completely leak-proof and easy to handle! Raise, lift off and take with you in a single operation, always ready to hand on any occasion: You take the SwingCase with you to your construction site or workplace - together with all the packed tools and assembly parts! SwingCase can be parked lying down or standing as usual. On the Ford F150, you can fix the SwingCase tool box to the side between the platform door and the wheel housing to save space. SwingCase for your F150 US truck on the passenger side can be swung out , and thus fills the previously unused platform space between the wheel housing and tailgate - adapted for every pickup of all vehicle manufacturers, models and years of construction. The box can be locked with a rotary lock and permanently locked with a key. SwingCase is made of tough and durable ABS rigid plastic, strong enough to hold a weight of up to 34kg. The tool box is resistant to UV radiation and does not fade. In addition, the tool box can be secured to the vehicle with a small padlock. This locking device is already included in many new swing case storage box series. The tool box (tool box) and storage box is an essential Ford F150 / Ford F250 accessory for every tradesman or hobby - do-it-yourselfers. The initial installation takes only about 15 minutes with 6 self-tapping sheet metal screws. Please note that the swing case cannot be installed in combination with an extendable loading floor. In the case of Ford F150 pickups with an inserted load compartment tub, this must be cut out in two places to ensure that the swing case tool box is held securely. This is the only way to ensure that the bracket fits perfectly on the vehicle.
Product number: UC-SC203P
€385.00*
Available in 90 days
Delivery from April
Only 7 available
Tool box 'SwingCase' SC204 - swing out - UCFR12
Ford Ranger 2012+
Variant - Alignment/Side: passenger side
NOVISauto – SwingCase for the Ford Ranger 2012+ / 2019+ pickup The ultra-practical box for tools, sporting goods and lots of small parts! You can reach your tools and small parts by effortlessly detaching your SwingCase box from the holder with just one movement and swiveling it towards you. No slouching or "bunk climbing" is more needed! NOVISauto, the leader in selling popular Ford Ranger accessories, builds these multi-purpose storage boxes out of high-impact ABS hard plastic for your convenience - strong enough for a long Ranger pickup truck life. SwingCase is "tough", it is waterproof, space-saving and therefore ideally suited for your Ford Ranger in all loading lengths. - The purchase of two SwingCases for both sides of your Ford Ranger platform wall is the best choice - space-saving, absolutely tight and easy to handle! Raise, lift off and take with you in a single operation, always ready to hand on any occasion: You take the SwingCase with you to your construction site or workplace - together with all the packed tools and assembly parts! SwingCase can be parked lying down or standing as usual. On the Ford Ranger 2012+, you can fix the SwingCase tool box on the side between the platform door and the wheel housing to save space. SwingCase for your Ford Ranger truck on the passenger side can be swung out and thus fills the previously unused platform space between the wheel housing and tailgate - adapted for every pickup of all vehicle manufacturers, models and years of construction. The box can be locked with a rotary lock and permanently locked with a key. SwingCase is made of tough and durable ABS rigid plastic, strong enough to hold a weight of up to 34kg. The tool box is resistant to UV radiation and does not fade. In addition, the tool box can be secured to the vehicle with a small padlock. This locking device is already included in many new swing case storage box series. The tool box (tool box) and storage box is an essential Ford Ranger accessory for every tradesman or hobby - do-it-yourselfers. Suitable for all Ford Ranger models (XL, XLT, Limited, Wildtrak, Raptor). The initial installation takes only about 15 minutes with 6 self-tapping sheet metal screws. Please note that the swing case cannot be installed in combination with an extendable loading floor. For Ford Ranger pickups with an inserted load compartment tub, this must be cut out in two places to ensure that the swing case tool box is held securely. This is the only way to ensure that the bracket fits perfectly on the vehicle.
Product number: UC-SC204P
€385.00*
Available in 90 days
Delivery from April
VW Zubehör
Care spray for tarpaulins - cargo area covers EX-TONNO TONIC
for all truck cargo area covers and tarpaulins
NOVISauto care spray "TONNO TONIC" for all luggage compartment covers and tarpaulins made of ABS hard plastic and vinyl. Tonno Tonic cares, cleans and gives your cover a fresh shine in a single step - it effectively protects against UV light. Tonno Tonic has been thoroughly tested and is 100% suitable for protecting all ABS hard plastic and vinyl covers. Remember to take care of your cover regularly! - she will thank you with a good, fresh appearance and a long life! Tonno Tonic protects against harsh weather, cold winter and hot summer days. For care, simply spray Tonno Tonic on the previously cleaned tarpaulin. Wipe the surface dry with a clean cloth. Feel free to use Tonno Tonic to clean your tires - please wait 5 minutes after spraying before you can wipe the tire surface dry. Your rims will not be damaged. Tonno Tonic is available in a 0.47 liter spray bottle or as a 6-pack for dealers.
Product number: EX-TONNO TONIC
€35.00*
Available in 90 days
Delivery from April
Only 1 available
CARRYBOY cross member model 558 €610.00*
for all Carryboy hardtops
CARRYBOY - aluminum cross member elliptical shape for mounting on all CARRYBOY hardtops with roof rails Length of the crossbars 125 cm Sturdy aluminum with a satin finish Including rubber insert Including attachments (matching feet) for the hardtop roof rails Can be attached to the hardtop without drilling When ordering, please name the built-in hardtop / cargo area roller blind - model The crossbars are ideal for attaching the CARRYBOY roof baskets - available in 5 different sizes.
Product number: GR-59350XXT
Variants from €595.00*
Available in 90 days
Delivery from April
Show more details
Only 3 available
CARRYBOY cross member model 558
for all Carryboy hardtops
CARRYBOY - aluminum cross member elliptical shape for mounting on all CARRYBOY hardtops with roof rails Length of the crossbars 125 cm Sturdy aluminum with a satin finish Including rubber insert Including attachments (matching feet) for the hardtop roof rails Can be attached to the hardtop without drilling When ordering, please name the built-in hardtop / cargo area roller blind - model The crossbars are ideal for attaching the CARRYBOY roof baskets - available in 5 different sizes.
Product number: CB-558-00
€275.00*
Available in 90 days
Delivery from April
CARRYBOY loading floor extension full bed 350kg double cabin Ranger / Navara NP300
for all pickups
Dimensions: M (VB) - double cab Ranger 12-19 / Navara
Carryboy - full bed pull-out shelf - Pull-out shelf cut out of aluminum checker plate according to the contour of the wheel housing This extendable loading floor is also available in combination with a drawer system in different sizes (CB-800). - Load capacity up to 350 kg! - Easy loading and unloading - you save time with it! - Non-slip, hard-wearing, easy-to-clean loading surface made of aluminum checker plate - best quality in processing and design - dimensionally stable, unbreakable and loadable up to approx. 350 kg - secure supply of spare parts - Simple assembly according to video and written assembly instructions - Convenient securing of the load with the integrated lashing eyes - The ball-bearing loading floor is unlocked with the handle - The loading area is almost completely filled - Wheel housings are cut out A notice: these products are so-called selection products, which are individually manufactured to your order. This pull-out drawer is divided into S / M / L categories in terms of dimensions. Due to the rectangular shape, the loading floor fits on different vehicles. As an option, the loading floor can be fully adapted to the vehicle. The area of the accessory drawer is expanded to include the area behind the wheel arches. When ordering, please indicate the vehicle in question so that we can assign you the right vehicle. You can also choose between the pull-out loading floor in aluminum or covered with an anti-slip rubber coating.
Product number: CB-788-00-A-M
€1,800.01*
Available in 90 days
Delivery from April
CARRYBOY loading floor extension rectangular 350kg double cab D-MAX / Hilux / L200 €1,700.00*
for all EU pickups and loading area lengths (selectable)
Dimensions: S (UNIV.) - Hilux / D-Max / L200 / Fullback double cab
Carryboy - Slide Floor Universal - Pull-out shelf made of aluminum checker plate with a three-sided frame for all mid-size pickup trucks This extendable loading floor is also available in combination with a drawer system in different sizes (CB-800). - Load capacity up to 350 kg! - Easy loading and unloading - you save time with it! - Non-slip, hard-wearing, easy-to-clean loading surface made of aluminum checker plate - best quality in processing and design - dimensionally stable, unbreakable and loadable up to approx. 350 kg - secure supply of spare parts - Simple assembly according to video and written assembly instructions - Convenient securing of the load with the integrated lashing eyes - The ball-bearing loading floor is unlocked with the handle. A notice: these products are so-called selection products, which are individually manufactured to your order. This pull-out drawer is divided into S / M / L categories in terms of dimensions. Due to the rectangular shape, the loading floor fits on different vehicles. As an option, the loading floor can be fully adapted to the vehicle. The area of the accessory drawer is expanded to include the area behind the wheel arches. The universal loading floor CB-778 is available as an accessory for these pickup vehicles with the following dimensions: Size S (1020*1380*208) - Toyota Hilux Revo, Isuzu Dmax, Mitsubishi L200, Fiat Fullback Size M (1080*1380*208) - Ford Ranger, Nissan Navara NP300, Renault Alaskan Size L (1200*1440*208) - VW Amarok Size XL - with the appropriate width, but 1700 mm length for single and extracab pickups. When ordering, please indicate the vehicle in question so that we can assign you the right vehicle. You can also choose between the pull-out loading floor in aluminum or covered with an anti-slip rubber coating.
Product number: CB-778-00-A-S
Variants from €1,675.00*
Available in 90 days
Delivery from April
Only 1 available
CARRYBOY loading floor pull-out rectangular 350kg
for all EU pickups and loading area lengths (selectable)
Carryboy - Slide Floor Universal - Pull-out shelf made of aluminum checker plate with a three-sided frame for all mid-size pickup trucks This extendable loading floor is also available in combination with a drawer system in different sizes (CB-800). - Load capacity up to 350 kg! - Easy loading and unloading - you save time with it! - Non-slip, hard-wearing, easy-to-clean loading surface made of aluminum checker plate - best quality in processing and design - dimensionally stable, unbreakable and loadable up to approx. 350 kg - secure supply of spare parts - Simple assembly according to video and written assembly instructions - Convenient securing of the load with the integrated lashing eyes - The ball-bearing loading floor is unlocked with the handle. A notice: these products are so-called selection products, which are individually manufactured to your order. This pull-out drawer is divided into S / M / L categories in terms of dimensions. Due to the rectangular shape, the loading floor fits on different vehicles. As an option, the loading floor can be fully adapted to the vehicle. The area of the accessory drawer is expanded to include the area behind the wheel arches. The universal loading floor CB-778 is available as an accessory for these pickup vehicles with the following dimensions: Size S (1020*1380*208) - Toyota Hilux Revo, Isuzu Dmax, Mitsubishi L200, Fiat Fullback Size M (1080*1380*208) - Ford Ranger, Nissan Navara NP300, Renault Alaskan Size L (1200*1440*208) - VW Amarok Size XL - with the appropriate width, but 1700 mm length for single and extracab pickups. When ordering, please indicate the vehicle in question so that we can assign you the right vehicle. You can also choose between the pull-out loading floor in aluminum or covered with an anti-slip rubber coating.
Product number: CB-778-01
€1,700.00*
Available in 90 days
Delivery from April
CARRYBOY luggage net model CB-999
Supplement to Carryboy roof baskets
Dimensions: 90x90 cm
Item No. CB-999 CARRYBOY - Luggage net - Article 999 the right addition to Carryboy roof baskets - in sizes 90 x 90 cm / 90 x 110 cm / 90 x 150 cm - UV and weather resistant - with hooks for quick, uncomplicated attachment - with carry bag - Best material and processing quality - unbreakable and resilient CARRYBOY has been building accessories for small pickup trucks: hardtops, tonneau covers, roll bars, running boards, roof racks, bumpers since 1969. We build hundreds of hardtops and tonneau covers and much more every day, which are sold in more than 150 countries worldwide. If you have any questions, please contact us by telephone on 02151-393593 or by e-mail at info@carryboy.de Please ask for the exact delivery time
Product number: CB-999.3
€55.00*
Available in 90 days
Delivery from April
Only 1 available
CARRYBOY roof basket model CB-550x-00
made of aluminium
Item No. CB-550x CARRYBOY - roof basket made of stainless steel, light and very stable aluminum with matching crossbars Available in 4 different sizes and 2 colors (silver or black): CB-550x-00 100*100cm CB-550x-01 100*120cm CB-550x-02 100*160cm CB-550x-03 100*130cm The luggage rack can be mounted on most cars, SUVs, VANs, pickups, trucks and Carryboy hardtops with suitable fasteners (self-assembly is possible). - No drilling required! - Dimensionally stable, unbreakable and resilient - easy to assemble - do it yourself - - available in different dimensions - secure supply of spare parts The roof basket is supplied with crossbars and can be attached to the roof rails using the mounting kit supplied. Appropriate fasteners (roof racks) are required for attachment to SUVs and pickup truck cabs. If you have any questions, please contact us by telephone on 02151-393593 or by e-mail at info@carryboy.de Please ask for delivery times for additional sizes.
Product number: GR-5934048T
€750.00*
Available in 90 days
Delivery from April
CARRYBOY roof rack CB-763-2400F
for all 1.5 cab/single cab hardtops and superstructures
Item No. CB-763-2400A CARRYBOY - Roof Rack Tradesman 120 x 240 cm with attachment The luggage rack can be mounted on the CSV Tradesman special body (suitable for models CSV, S560, SO, S8, S7, S6) with suitable fastening elements. - Best quality in processing and design - at an attractive price - dimensionally stable, unbreakable and resilient - easy to assemble Also available in dimensions: 120 x 190 cm - Article no. CB-763-1900A for double cabin / extra cabin The CARRYBOY roof rack in hammer finish is supplied with the appropriate holders for the desired hardtop / box body. If your hardtop already has roof rails, we recommend sealing the existing holes in advance. The holders for the roof load system have different attachment points that have to be created on site on the hard top / box body. CARRYBOY has been building accessories for small pickup trucks: hardtops, tonneau covers, roll bars, running boards, roof racks, bumpers since 1969. We build hundreds of hardtops and tonneau covers and much more every day, which are sold in more than 150 countries worldwide.
Product number: CB-763-2400F
€1,300.00*
Available in 90 days
Delivery from April
CARRYBOY roof rack model CB-763-1900A
for all double cab hardtops and superstructures
Item No. CB-763-1900A CARRYBOY - Roof RacksTradesman 120 x190 cm with attachment The luggage carrier can be attached to the special CSV Tradesman (or suitable for models CSV, S560, SO, S8, S7, S6). - Best quality in processing and design - at an attractive price - dimensionally stable, unbreakable and resilient - easy to assemble Also available in dimensions: 120 x 240 cm - Item No. CB-763-2400F for Single Cab The roof basket is supplied with crossbars and can be attached to the roof rails of a CARRYBOY hardtop using the assembly kit supplied, but also to rails from other manufacturers (see explanations below). Suitable fastening elements are required for attachment to SUVs, to the cabs of pickup trucks, which can be ordered separately. CARRYBOY has been building accessories for small pickup trucks: hardtops, tonneau covers, roll bars, running boards, roof racks, bumpers since 1969. We build hundreds of hardtops and tonneau covers and much more every day, which are sold in more than 150 countries worldwide.
Product number: CB-763-1900A
€1,300.00*
Available in 90 days
Delivery from April
Only 1 available
Carryboy roof tent for 2-3 people Series 1
Roof tent 2-3 people for mid-size / pickup / SUV
CARRYBOY ROOF TENT CB-102-2P for all common pickups, SUVs and mid-size cars: Material: Materials from the outside: Oxford polyester with silver coating and UPF50+ (absorbs more than 98% of UV rays) Material from inside: 190 g/sqm rip-stop polyester with PU 2000mm Bottom material: 210 Denier Oxford Nylon with PU 2000mm Interior: rust-free aluminum struts ensure structure and comfortable lying 6 cm foam mattress can be removed and cleaned 6 large windows with insect screens 2 shoe bags at the entrance - the dirt stays outside Comfort: Self-deploying within a few seconds using gas pressure springs spacious room for 2-3 people Protected against wind, weather and rain Foam mattress 6cm 2 extra shoe boxes Entry ladder can be extended by a maximum of 2m, fixed to the tent and foldable Fly screens in front of the windows Reliable UV protection tent size: Unfolded & erected: 1,340 x 2,165 x 1,343mm folded: 1,340 x 2,165 x 300mm Weight: 56 kg (together with ladder)
Product number: CB-102-2P
€1,760.00*
Available in 90 days
Delivery from April
CARRYBOY tool box CB-735
for all pickup trucks - front opening - silver metallic
CARRYBOY - XXL storage box / transport box Jumbo 735 - front opening for sport and business - for all pickups - Lid can be locked in the middle with a rotary lock - 2 keys are included - Rain seal - Paintwork in silver metallic / matt black / plain black - Chrome trim - Gas pressure shock absorber - Interior lining using robust dark gray woven fabric, floor rubber mat - Includes assembly set for attaching the storage box to the front tail lift - assembly description - Storage space approx. 0.40 - 0.45 cubic meters - Dimensions according to the attached figure (L x W x H )
Product number: CB-735-B
€875.00*
Available in 90 days
Delivery from April
CARRYBOY tool box model CB-737
for all pickup models - can be opened on the side with 2 covers - silver metallic
CARRYBOY - pickup loading areas storage box / transport box / jumbo box - 737 side opening right / left for all pickups Standard version: - best quality by processing high-quality materials - dimensionally stable, unbreakable and resilient - Two lids can be closed on the side and in the middle with rotary locks - 2 keyed alike are included - Rain seal - Paintwork in silver metallic - Chrome trim - Gas pressure shock absorber - Interior lining with robust dark gray woven fabric, floor rubber mat - Includes assembly set for attaching the storage box to the front tail lift - assembly description - Storage space approx. 0.45 - 0.48 cbm - A notice: Please note before placing your order: a mounted roll bar can be a hindrance when opening and closing the side storage box lid. - In this case, we would recommend storage box item 735 or 704 with a front-closing lid. Other storage boxes are available: - Item No. 735A with front-closing cover - 1290 x 550 x 555 x 285 mm, approx. 0.40 cbm - Item No. 735B with front-closing cover - 1380 x 550 x 555 x 255 mm, approx. 0.43 cbm - Item No. 704C with front-closing cover - 1304 x 350 x 495 x 282 mm, approx. 0.20 cbm - Item No. 704J with front-closing lid - 1380 x 345 x 553 x 247 mm, approx. 0.24 cbm
Product number: CB-737-A
€950.00*
Available in 90 days
Delivery from April
Carryboy tool drawers with loading floor CB-800
for double cab pickups
Dimensions: S - Small drawer | Variant - base: Aluminum checker plate
Carryboy tool drawer model CB-800 Tool drawers and pull-out shelf with three-sided frame for all European midsize pickups. (Ford Ranger, Nissan Navara, VW Amarok, Mercedes X, Mitsubishi L200, Renault Alaskan, Fiat Fullback, Toyota Hilux, Isuzu D-Max) - Load capacity of the pulled-out drawers/loading floor up to 100 kg! - Easy loading and unloading - you save time with it! - Non-slip, durable, easy-to-clean loading surface - best quality in processing and design - dimensionally stable, unbreakable and resilient - secure supply of spare parts - easy assembly - fits in every pick-up, depending on the size - Lockable drawers for extra security - recommended size for installation with hardtop - p
Product number: CB-800-S-A-00
€2,525.00*
Available in 90 days
Delivery from April
Tip
Crossbar system increases ELEVATE RACK FS
for all pickup trucks
Variante - Modell: Elevate FS - Fullsize Trucks / Ranger / Gladiator
Equip your pickup truck of any brand with an Elevate Rack crossbar from NOVISauto. Expand your storage space with accessories from the storage and transport solutions section. Our accessories adapt seamlessly to your vehicle. The assembly kit and installation instructions are included. If required, we can carry out the professional installation of the accessories ourselves. Our employees are technically skilled, professionally competent and practically experienced. Your NOVISauto accessories at a glance: For all brands of all years NOVISauto accessories manufactured by Realt Truck Truxedo Can be combined with load compartment covers with rail system or T-slot system More space, more joy - Elevate Rack crossbar system is an ideal storage and transport solution The Elevate Rack is a unique solution for your pickup truck. Expand your cargo space with raised crossbars at cab height. This means no cargo space is lost on the bed. On the contrary - new chances and opportunities arise. More cargo space, more room. We offer various accessories to optimise the loading options. Choose between a roof basket, kayak holder, load securing and lashing clamps. Our unique solution can be combined with load area covers. So don’t hesitate and use this unique product!
Product number: TX-1118570
€1,395.00*
Available in 90 days
Delivery from April
Only 2 available
Huckepack camping construction base for pickups
for all pickups
Camping Aufbau Level: Basisausstattung
The basic version of the Huckepack camping pickup structure combines everything you need to experience a short adventure. Drive to the North Sea for the weekend and listen to the sound of the waves. How about a 4 to 5 day short trip to the Black Forest and enjoy the peace and quiet while the forest and nature embrace you? Our motto "Freedom on wheels" is our motto. Enjoy the opportunity to go anywhere. Even the basic version is generously equipped and covers all your basic needs so that nothing stands in the way of your trip. The structure can be packed and unpacked quickly and easily - you can travel from one place to another in just a few minutes. The Aqualon tent provides reliable protection from wind and weather, allows light and solar heat to pass through - at the same time it is a tried and tested material from sailing ship construction. The main function of the basic version - a good night's sleep and good rest - is taken care of. A hammock and mattresses are included. The side, retractable entry ladder makes it easy to enter and exit the structure. Our high quality ensures a very long service life over several pickups. We only use the best materials such as stainless steel, use high-precision machines for perfect laser cutting and intelligent solutions such as a floor with water drainage. In addition, all exterior materials are powder-coated black and the interior is powder-coated gray. Of course, your safety should not be neglected. A fire extinguisher and a smoke and CO2 alarm are naturally included. Make your dreams come true and let there be no limits to your freedom!
Product number: SW10230.1
Price on request
Available in 90 days
Delivery from April
Show more details
Huckepack Camping Setup Kit 'N Kaboodle for Pickups
for all pickups
Camping Aufbau Level: Kit 'N Kaboodle
The Kit 'N Kaboodle Huckepack camping pickup truck with the highest specification has everything you can imagine for being on the road for several weeks or longer without permanent accommodation. Go on a multi-week road trip across the country without any problems, drive to Spain and then back via Italy and stop wherever you like. Don't set yourself any limits, because our camping setup doesn't set any for you! In the truest sense of the word, our motto is "Freedom on wheels", because with our construction the world can become your home! The structure is quick and easy to pack and unpack - you can travel from one place to another in just a few minutes. The Aqualon tent provides reliable protection from wind and weather, allows light and solar heat to pass through - at the same time it is a tried and tested material from sailing ship construction. The main function of the basic version - a good night's sleep and good rest - is taken care of. A hammock and mattresses are included. The side, retractable entry ladder makes it easy to enter and exit the structure. Our high quality ensures a very long service life over several pickups. We only use the best materials such as stainless steel, use high-precision machines for perfect laser cutting and intelligent solutions such as a floor with water drainage. In addition, all exterior materials are powder-coated black and the interior is powder-coated gray. Of course, your safety should not be neglected. A fire extinguisher and a smoke and CO2 alarm are naturally included. Make your dreams come true and let there be no limits to your freedom!
Product number: SW10230.2
Price on request
Available in 90 days
Delivery from April
Show more details
Huckepack Camping Setup Skin 'N Bones for Pickups
for all pickups
Camping Aufbau Level: Skin 'N Bones
The mid-range Huckepack camping pickup structure allows you to camp comfortably without having to forego comfort. It gives you that little extra on your adventures. Have everything you need on board! Head east for a long weekend or enjoy a 7-day holiday in France. How about a "road trip" based on the American model? A different stop every day, no hotel required - you, the road, the camping setup and of course nature and adventure! Don't worry about running out of space - a unique advantage of our bodies is that there is still storage space between the body and the pickup bed - load your accessories without having to have a trailer! Our motto "Freedom on wheels" says it all. Enjoy the opportunity to go anywhere. Our high quality ensures a very long service life over several pickups. We only use the best materials such as stainless steel, use high-precision machines for perfect laser cutting and intelligent solutions such as a floor with water drainage. In addition, all exterior materials are powder-coated black and the interior is powder-coated gray. Your safety is our top priority! A fire extinguisher and smoke and CO2 alarms are of course included. Make your dreams come true and let there be no limits to your freedom!
Product number: SW10230.3
Price on request
Available in 90 days
Delivery from April
Show more details
NOVISauto AutoSafe cassette safe portable with holder for vehicles
for all vehicles with enough space - permanently installed
TUFFY closure: 10 combination lock
The handy and compact solution for your valuables that you always want to carry with you. The valuables box from NOVISauto offers versatile protection for these items. Benefit from safe storage with maximum mobility at the same time. The portable valuables cassette is supplied with a holder for the vehicle. Additional holders, for example for installation in the house, in the caravan or elsewhere, are available from us. The safe cassette can be pushed into the holder and secured. To take the closed cassette with you, it can be removed from the holder again. The cassette can be stored elsewhere in another holder without opening it. Ideally suited as hunting equipment for the vehicle. Are you obliged to remove all valuables from the car or to keep them safe? The car safe offers a more convenient storage option for all valuable goods in the vehicle. Also ideally suited as camping equipment, installation for caravans, campers and pickups - residential structures. The only condition for installation: There must be enough space to hold the security cassette. Standard equipment: Portable slide-in cassette including a holder for permanent installation Install Bracket: Bolt to vehicle or other suitable surface with SAE J429 Grade 8 Fastening Kit (High Tensile Alloy Steel) Usage: Ideal for hunting or for locking valuables that you carry with you Robust workmanship and strength: 1.3mm thick steel - welded all around - matt black powder-coated Padded inside with foam Lid with seal and continuous hinge - including hand strap Standard lock: Exclusive lock for double-bit keys with 10 tumblers Alternative closure: Additional pressure cylinder lock for quick opening of the box External dimensions: 230mm length // 255mm width // 76mm height Inside dimensions: 155mm length // 240mm width // 50mm height
Product number: TU-28908901
€510.00*
Available in 90 days
Delivery from April
NOVISauto AutoSafe laptop security box for vehicles (max. 15 inch)
for all vehicles with enough space - permanently installed
Laptop security box for fixed or flexible installation in vehicles The laptop security box from NOVISauto offers convenient protection for your tablet or laptop in the vehicle. The steel container with a thick wall - lockable with a key or combination lock - is either firmly screwed into the vehicle or flexibly attached to a fixed point using a sheathed steel cable. The generous storage space of the box offers space for most laptops or tablets with a screen size of up to 15 inches. The inside of the safety box is lined with black foam to protect the electronics. Are you obliged to remove all valuables from the car? The car safe offers a more convenient storage option for all valuable goods in the vehicle. Also ideally suited as camping equipment, installation for caravans, mobile homes and pickups - residential structures. The only condition for installation: There must be enough space for the safety box. For safe, flexible installation, there should be an accessible fixing point for the steel sling. Standard equipment: Unique laptop safe for installation in all vehicles with enough space Fixed Installation : Bolt to vehicle using SAE J429 Grade 8 Fastening Kit (One of the highest tensile strength alloy steels available) - Standard Flexible installation : Reinforced steel sling, black coated, for attachment to a fixed point without screw connection or drilling - to be purchased as an extra Use : employees in the field and as camping equipment for caravans, residential structures or as a lockable security box for valuable tools / hunting equipment Robust workmanship and strength : Box welded all around from 1.3 mm steel plates - powder-coated matt black Lid with seal and continuous particularly stable hinge - 2.6mm material thickness Padding: up to 5 cm thick foam padding inside prevents damage and slipping of the contents Closure: Exclusive Pryguard lock with security key and weather seal. External dimensions: 465mm length // 135mm width // 362mm height Internal dimensions: 400mm length // 71mm width // 288mm height
Product number: TU-18201
€569.68*
Available in 90 days
Delivery from April
NOVISauto AutoSafe portable tablet security box for vehicles
for all vehicles - flexibly installed
Tablet security box for fixed or flexible installation in vehicles The tablet security box from NOVISauto offers convenient protection for your tablet or other larger valuables in the vehicle. The steel container with a thick wall - lockable with a number combination lock (3 combination) - is flexibly attached to a fixed point in the car using a coated steel cable. The generous storage space of the box offers space for most tablets with standard screen sizes. The inside of the safety box is lined with black foam to protect the electronics. Are you obliged to remove all valuables from the car? The car safe offers a more convenient storage option for all valuable goods in the vehicle. Also ideally suited as camping equipment, installation for caravans, mobile homes and pickups - residential structures. The only condition for installation: There must be enough space for the safety box. For safe, flexible installation, there should be an accessible fixing point for the steel sling. Due to the attachment with a steel cable and the low weight of approx. 3.5kg, this safe can also be carried between vehicle / office / home. Standard equipment: Unique tablet safe for installation in all vehicles with enough space Flexible installation : Reinforced steel sling, black coated, for attaching to a fixed point without screw connection or drilling - tensile load up to 1000kg - length 65cm. Fixed installation: Pre-drilled holes on the steel box for attaching to solid surfaces with screw connection Use : Electronic lock (e.g. tablet or mini-laptop), valuables lock for travelers and camping, fleet needs Robust workmanship and strength : Box welded from 1.3 mm steel plates - powder-coated Lid with seal : Continuous stable hinge - including removable hinge lock (connects full opening of the lid) Power supply & data exchange: passages on the cover for power and data cables Padding: Foam pads prevent damage and shifting of the contents Closure: 3-digit combination lock with twist lock - double steel bar inside External dimensions: 355mm length // 270mm width // 45mm height Internal dimensions: 330mm length // 205mm width // 25mm height
Product number: TU-31801
€393.88*
Available in 90 days
Delivery from April
NOVISauto AutoSafe trunk vehicle safe for permanent installation
for all vehicles with enough space - permanently installed
NOVISauto - AutoSafe / lockable storage box for valuables for permanent installation in the trunk The trunk security box from NOVISauto offers convenient protection for your valuables in the vehicle. The steel container with a thick wall - lockable with a key or combination lock - is permanently attached to the vehicle and offers optimal protection for documents, tablets, laptops, cash and much more. The generous storage space including a shelf for small items offers space for all kinds of items. Are you obliged to remove all valuables from the car? The car safe offers a more convenient storage option for all valuable goods in the vehicle. Also ideally suited as camping equipment, installation for caravans, mobile homes and pickups - residential structures. The only condition for installation: There must be enough space for the safety box. Standard equipment: Unique trunk safe for installation in all vehicles with enough space Installation: Bolt to vehicle using SAE J429 Grade 8 Fastening Kit (One of the highest tensile strength alloy steels available) Use: Sales staff in the field and as camping equipment for caravans, residential structures or as a lockable safety box for valuable tools / hunting equipment Robust workmanship and strength: 1.3mm thick steel - welded all around - matt black powder-coated Lid with seal and continuous hinge - powder-coated Integrated storage compartment for small items 225mm length // 160mm width // 75mm height Closure: Pryguard pressure lock with security key and weather seal. The box can either be simply closed or firmly locked by pressing the lock. Then it can only be opened with a key. External dimensions: 245mm length // 860mm width // 290mm height Inside dimensions: 230mm length // 840mm width // 280mm height
Product number: TU-02501
€898.00*
Available in 90 days
Delivery from April
NOVISauto Autosafe UNIVERSAL center console for all US pickups and SUVs of all sizes €732.00*
for all US pickups and SUVs in all sizes
Variant - center consoles: Deluxe / 033 - width 25.4 cm (10")
NOVISauto - lockable cassettes with stereo compartment (model Stereo DELUXE) for car center consoles The lockable Autosafe cassette for installation in the center console of your pickup or SUV offers security for your valuables. In addition to the lockable security compartment "SERIES 2", the "Deluxe" car safe cassette for the center console offers an additional compartment for installing a CD player. Security : The cassettes offer a safe and secure place for valuables that you want to have close at hand while driving. The stable cassette is made of 1.5 mm thick steel with a tight-fitting lid. Locking is via the US-patented, burglar-proof locking system Pry-Guard with double-bit key with 10 tumblers. The unique design includes an exclusive hinge system. Grade 8 mounting hardware is included. The Stereo Deluxe consoles are equipped with patented push-button locking system and Pry-Guard II locking system, which ensure lasting security. Furnishing: The outside of the cassette has a durable black powder coating with a textured finish. Choose the color to match the interior of your vehicle: Black beige brown The bottom of the cassette is covered with a rubber mat, the cup holder can accommodate different formats thanks to the size of the openings, flexible rubber mounts are used to minimize vibrations while driving. Comfort: The padded and vinyl covered armrests are for your personal comfort. That Patented push button locking system allows the lid to be closed without locking. Useful details such as a practical storage compartment and a removable small parts tray under the lid complete the offer. Assembly: Supplied with high quality mounting kit and more detailed installation instructions. Note: Standard hardware will require holes to be drilled and secured with the fasteners provided. Depending on your vehicle's center console design, additional hardware may be required.
Product number: TU-Universal Console.4
Variants from €635.00*
Available in 90 days
Delivery from April
NOVISauto AutoSafe vehicle safe for permanent installation in vehicles
for all vehicles with enough space - permanently installed
NOVISauto - LOCKBOX - AutoSafe for permanent installation The compact security box from NOVISauto offers convenient protection for your valuables in the vehicle. The steel container with a thick wall - lockable with a key or combination lock - is permanently attached to the vehicle and offers optimal protection for documents, tablets, laptops, cash and much more. Are you obliged to remove all valuables from the car? The car safe offers a more convenient storage option for all valuable goods in the vehicle. Also ideally suited as camping equipment, installation for caravans, mobile homes and pickups - residential structures. The only condition for installation: There must be enough space for the safety box. Standard equipment: Unique vehicle safe for installation in all vehicles with enough space Installation: Bolt to vehicle using SAE J429 Grade 8 Fastening Kit (One of the highest tensile strength alloy steels available) Use: Sales staff in the field and as camping equipment for caravans, residential structures or as a lockable security box for valuable tools Robust workmanship and strength: 1.3 mm thick steel - welded all around - matt black powder-coated Lid with seal and continuous hinge - powder-coated Standard lock: Exclusive lock for double-bit keys with 10 tumblers Alternative lock: 3 digit combination with rotary lock without key (see accessories) External dimensions: 159mm length // 400mm width // 257mm height Internal dimensions: 146mm length // 384mm width // 248mm height
Product number: TU-02901
€374.90*
Available in 90 days
Delivery from April
Show more details
Alternative: Ford Hardtops
Tip
Carryboy hardtop with sliding window SR5-IFRD
Isuzu Dmax Extra Cab 2021+
Variant - central locking: Without central locking | sidewindow: Without side window
Carryboy hardtop model SR5 for the new Ford Ranger Doublecab from year of construction 2023+ Side tinted sliding windows Tinted all-glass rear door Rear door can be opened from inside Bow sliding window optionally available (additional costs) Roof lining made of woven needle felt - anthracite Interior light 3-way manually adjustable automatic on/off switching when opening and closing the tailgate when you close the hardtop rear door, you also close the platform hatch Roof rails tested with a load of 60 kg Spoiler with 3rd brake light Hinges in stainless steel Mounting kit and description included in the delivery
Product number: SR5oS-FRD
€2,899.99*
Available in 90 days
Delivery from April
Carryboy Hardtop without side window 560oS-FD
Ford Ranger double cab year 2002-2011
Carryboy hardtop model 560oS-FD without side window for Ford Ranger double cab year 2002-2011 - available in all body colors Standard version: without side window bow window Bow sliding window optionally available (additional costs) 2-component primer Tinted all-glass rear door the tailgate can be opened from the inside Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manual adjustable Automatic on/off switch when opening/closing the tailgate when you close the hardtop rear door, you also close the platform hatch the black, removable roof rails have been tested with a load capacity of 80 kg Spoiler with 3rd brake light Hinges in stainless steel Mounting kit and description are included in the delivery
Product number: 560oS-FD
€2,899.99*
Available in 90 days
Delivery from April
Carryboy hardtop with sliding window 560-FD
Ford Ranger Double Cab 2002-2011
Carryboy hardtop model 560-FD with tinted sliding windows on the side Accessories for Ford Ranger Double Cab Bj. 2002-2011 - in all body colors. Side tinted sliding windows Tinted all-glass rear door the tailgate can be opened from the inside bow window Bow sliding window optionally available (additional costs) Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manual adjustable Automatic on/off switch when opening/closing the tailgate when you close the hardtop rear door, you also close the platform hatch the black one, detachable) Roof rails have been tested with a load capacity of 80 kg Spoiler with 3rd brake light Hinges in stainless steel Mounting kit and description are included in the delivery
Product number: 560-FD
€3,075.00*
Available in 90 days
Delivery from April
Carryboy hardtop with sliding window 560-FTD
Ford Ranger Double Cab 2012+/2019+
Variant - central locking: Without central locking
Carryboy hardtop model 560 with tinted sliding windows on the side Accessories for Ford Ranger Double Cab 2012+ - in all body colors. Side tinted sliding windows Tinted all-glass rear door the tailgate can be opened from the inside bow window Bow sliding window optionally available (additional costs) Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manual adjustable Automatic on/off switch when opening/closing the tailgate when you close the hardtop rear door, you also close the platform hatch the black one, detachable) Roof rails have been tested with a load capacity of 80 kg Spoiler with 3rd brake light Hinges in stainless steel Mounting kit and description are included in the delivery
Product number: 560-FTD
€3,075.00*
Available in 90 days
Delivery from April
Only 2 available
Carryboy Hardtop without window 560oS-FTD
Ford Ranger Double Cab 2012+/2019+
Variant - central locking: Without central locking
Carryboy hardtop model 560 without side window Accessories for Ford Ranger double cab 2012+ - available in all body colors. Standard version: without side window bow window Bow sliding window optionally available (additional costs) Two-component primer Tinted all-glass rear door the tailgate can be opened from the inside Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manual adjustable automatic on/off switch when opening and closing the tailgate when you close the hardtop tailgate, you also close the platform hatch the black, removable one Roof rails have been tested with a load capacity of 80 kg Spoiler with 3rd brake light Hinges in stainless steel Mounting kit and description are included in the delivery
Product number: 560oS-FTD
€2,899.99*
Available in 90 days
Delivery from April
Carryboy hardtop model 840oS-FD
for Ford Ranger double cab year 2002-2011
Carryboy hardtop model 840 without side windows for Ford Ranger double cab 2002-2011 - in all body colors Fixed window in front Laterally without window made of GfK hard plastic lockable rear door (chrome lock) the rear door can also be opened from the inside for safety Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manual adjustable when you close the hardtop rear door, you also close the platform hatch Chrome roof rails for decorative purposes - not resilient 3rd brake light integrated in hard top hatch Hinges in stainless steel Mounting kit and description are included in the delivery
Product number: 840oS-FD
Price on request
Available in 90 days
Delivery from April
Show more details
Carryboy hardtop model 840oS-FTD
Ford Ranger double cab year 2012+/2019+
Carryboy hardtop model 840 without side window for Ford Ranger double cab - in all body colors Fixed window in front Side without window lockable rear door (chrome lock) the tailgate can be opened from the inside Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manual adjustable Automatic on/off switch when opening/closing the tailgate when you close the hardtop rear door, you also close the platform hatch Chrome roof rails for decorative purposes (not resilient) 3rd brake light Hinges in stainless steel Mounting kit and description are included in the delivery
Product number: 840oS-FTD
Price on request
Available in 90 days
Delivery from April
Show more details
Carryboy Hardtop with folding window and sliding window SO56-FTD
Ford Ranger double cab from year 2012+/2019+
Variant - central locking: Without central locking
Carryboy hardtop model SO56 a side tinted folding window and a sliding window for Ford Ranger double cab 2012+ - available in all body colors side tinted folding window on driver's side side tinted sliding window on passenger side bow window Tinted all-glass rear door the tailgate can be opened from the inside Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manual adjustable Automatic on/off switch when opening/closing the tailgate when you close the hardtop rear door, you also close the platform hatch the black one, detachable) Roof rails have been tested with a load capacity of 60 kg Spoiler with 3rd brake light Hinges in stainless steel Mounting kit and description are included in the delivery
Product number: SO56-FTD
€3,200.01*
Available in 90 days
Delivery from April
Carryboy hardtop model 840-FTD
Ford Ranger double cab year 2012+/2019+
Carryboy hardtop model 840 with side sliding windows for Ford Ranger double cab - in all body colors Fixed window in front side sliding windows lockable rear door (chrome lock) the tailgate can be opened from the inside Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manual adjustable Automatic on/off switch when opening/closing the tailgate when you close the hardtop rear door, you also close the platform hatch the black one, detachable) Roof rails have been tested with a load capacity of 80 kg Spoiler with 3rd brake light Hinges in stainless steel Mounting kit and description are included in the delivery
Product number: 840-FTD
Price on request
Available in 90 days
Delivery from April
Show more details
Carryboy hardtop model 840-FD
for Ford Ranger double cab year 2002-2011
Carryboy hardtop model 840 with side sliding windows for Ford Ranger 2002-2011 double cab - in all body colors Fixed window in front side sliding windows lockable rear door (chrome lock) the tailgate can be opened from the inside Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manual adjustable Automatic on/off switch when opening/closing the tailgate when you close the hardtop rear door, you also close the platform hatch Chrome roof rails for decoration (no load possible) Spoiler with 3rd brake light Hinges in stainless steel Mounting kit and description are included in the delivery
Product number: 840-FD
Price on request
Available in 90 days
Delivery from April
Show more details
Tip
Carryboy hardtop with sliding window SR5-IFRD €3,313.00*
Isuzu Dmax Extra Cab 2021+
Variant - central locking: With central locking | sidewindow: Full glass sliding window
Carryboy hardtop model SR5 for the new Ford Ranger Doublecab from year of construction 2023+ Side tinted sliding windows Tinted all-glass rear door Rear door can be opened from inside Bow sliding window optionally available (additional costs) Roof lining made of woven needle felt - anthracite Interior light 3-way manually adjustable automatic on/off switching when opening and closing the tailgate when you close the hardtop rear door, you also close the platform hatch Roof rails tested with a load of 60 kg Spoiler with 3rd brake light Hinges in stainless steel Mounting kit and description included in the delivery
Product number: SR5(R)-FRD
Variants from €2,899.99*
Available in 90 days
Delivery from April
Carryboy Hardtop with hinged window SO-FD
for Ford Ranger double cab year 2002-2011**
Variant - central locking: Without central locking
Carryboy hardtop model SO with tinted folding windows on the side Ford Ranger double cab - in all body colors side tinted folding windows Tinted all-glass rear door bow window Bow sliding window optionally available (additional costs) the tailgate can be opened from the inside Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manual adjustable Automatic on/off switch when opening/closing the tailgate when you close the hardtop rear door, you also close the platform hatch the black one, detachable) Roof rails have been tested with a load capacity of 80 kg Spoiler with 3rd brake light Hinges in stainless steel Mounting kit and description are included in the delivery
Product number: SO-FD
€3,350.00*
Available in 90 days
Delivery from April
Carryboy Hardtop with hinged window S6-FTD
Ford Ranger double cab from year 2012+/2019+
Variant - central locking: Without central locking
CARRYBOY hardtop model S6 with side tinted vent windows for Ford Ranger year of construction from 2012 double cab - available in all body colors Side tinted vent windows Tinted all-glass rear door the tailgate can also be opened from the inside Roof lining made of robust, close-meshed black-grey woven fabric No vinyl!!! and therefore no risk of mold stains, easy to clean and repair Interior lamp 3-fold manually adjustable from the inside Automatic on/off switch when opening/closing the tailgate. When you close the hardtop rear door, you also lock the platform hatch Aluminum roof rails, removable - tested to 80 kg for additional loading capacity Stainless steel hinges Mounting kit and description included
Product number: S6-FTD
€3,350.00*
Available in 90 days
Delivery from April
Carryboy Hardtop with hinged window SO-FTD
Ford Ranger Double Cab 2012+
Variant - Hardtop version: SO - standard design | Variant - central locking: Without central locking
Carryboy hardtop model SO with side tinted folding windows for Ford Ranger double cab - in all body colors side tinted folding windows Tinted all-glass rear door bow window Bow sliding window optionally available (additional costs) the tailgate can be opened from the inside Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manual adjustable Automatic on/off switch when opening/closing the tailgate when you close the hardtop rear door, you also close the platform hatch the black one, detachable) Roof rails have been tested with a load capacity of 80 kg Spoiler with 3rd brake light Hinges in stainless steel Mounting kit and description are included in the delivery
Product number: SO-FTD
€3,350.00*
Available in 90 days
Delivery from April
Tip
Carryboy hardtop with glass flaps and central locking SLR(R)-IGD €3,588.00*
Isuzu D-Max Double Cab 2021+
Variant - central locking: With central locking
CARRYBOY hardtop model SLRR with side tinted folding window for Isuzu D-Max double cab 2021+ - available in all body colors side tinted folding windows in SUV style and central locking (continuous with no visible fasteners) All-glass tinted rear door with heating and central locking (SUV style) bow window Bow sliding window optionally available (additional costs) the rear door can also be opened from the inside for safety Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manual adjustable Automatic on/off switch when opening/closing the tailgate when you close the hardtop rear door, you also close the platform hatch the black roof rails have been tested with a load capacity of 80 kg GRP spoiler with paint finish and 3rd brake light Hinges in stainless steel Mounting kit and description are included in the delivery
Product number: SLR(R)-FRD
Variants from €3,350.00*
Available in 90 days
Delivery from April
Carryboy hardtop with side flaps WM-FTD
Ford Ranger Double Cab 2012+/2019+
Variant - Hardtop version: WM - standard design | Variant - central locking: Without central locking
One of our BEST for the Ford Ranger Double Cab! our Carryboy professional hardtop model WM-Workman, finished in universal white - but also available in any other color. Carryboy's robust first-class professional hardtop for trade, commerce, sports, leisure and the public sector, an ideal hardtop for the vehicle fleet! Bow sliding window optionally available (additional costs) for maximum convenience in loading and unloading available in universal white (painted finish - top coat is clear coat) also available in all vehicle colors from the world market leader Carryboy side GfK flaps Tinted all-glass rear door lockable rear door (chrome lock) the tailgate can be opened from the inside Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manual adjustable Automatic on/off switch when opening/closing the tailgate when you close the hardtop rear door, you also close the platform hatch Spoiler with 3rd brake light Hinges in stainless steel Mounting kit and description are included in the delivery
Product number: WM-FTD
€3,600.00*
Available in 90 days
Delivery from April
Tip
Carryboy hardtop with side flaps WM-FTD €3,838.00*
Ford Ranger Double Cab 2012+/2019+
Variant - Hardtop version: WM - standard design | Variant - central locking: With central locking
One of our BEST for the Ford Ranger Double Cab! our Carryboy professional hardtop model WM-Workman, finished in universal white - but also available in any other color. Carryboy's robust first-class professional hardtop for trade, commerce, sports, leisure and the public sector, an ideal hardtop for the vehicle fleet! Bow sliding window optionally available (additional costs) for maximum convenience in loading and unloading available in universal white (painted finish - top coat is clear coat) also available in all vehicle colors from the world market leader Carryboy side GfK flaps Tinted all-glass rear door lockable rear door (chrome lock) the tailgate can be opened from the inside Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manual adjustable Automatic on/off switch when opening/closing the tailgate when you close the hardtop rear door, you also close the platform hatch Spoiler with 3rd brake light Hinges in stainless steel Mounting kit and description are included in the delivery
Product number: WM(R)-FRD
Variants from €3,600.00*
Available in 90 days
Delivery from April
Carryboy Hardtop extra height with side flaps WMH-FTD €4,100.00*
Ford Ranger Double Cab 2012+/2019+
Variant - Hardtop version: WMH - extra large side flaps | Variant - central locking: Without central locking
One of our BEST for the Ford Ranger Double Cab! our Carryboy professional hardtop model WM-Workman, finished in universal white - but also available in any other color. Carryboy's robust first-class professional hardtop for trade, commerce, sports, leisure and the public sector, an ideal hardtop for the vehicle fleet! Bow sliding window optionally available (additional costs) for maximum convenience in loading and unloading available in universal white (painted finish - top coat is clear coat) also available in all vehicle colors from the world market leader Carryboy side GfK flaps Tinted all-glass rear door lockable rear door (chrome lock) the tailgate can be opened from the inside Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manual adjustable Automatic on/off switch when opening/closing the tailgate when you close the hardtop rear door, you also close the platform hatch Spoiler with 3rd brake light Hinges in stainless steel Mounting kit and description are included in the delivery
Product number: WMH-FTD
Variants from €3,600.00*
Available in 90 days
Delivery from April
Tip
Carryboy hardtop with side flaps WM-FTD €4,100.00*
Ford Ranger Double Cab 2012+/2019+
Variant - Hardtop version: WMH - extra large side flaps | Variant - central locking: Without central locking
One of our BEST for the Ford Ranger Double Cab! our Carryboy professional hardtop model WM-Workman, finished in universal white - but also available in any other color. Carryboy's robust first-class professional hardtop for trade, commerce, sports, leisure and the public sector, an ideal hardtop for the vehicle fleet! Bow sliding window optionally available (additional costs) for maximum convenience in loading and unloading available in universal white (painted finish - top coat is clear coat) also available in all vehicle colors from the world market leader Carryboy side GfK flaps Tinted all-glass rear door lockable rear door (chrome lock) the tailgate can be opened from the inside Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manual adjustable Automatic on/off switch when opening/closing the tailgate when you close the hardtop rear door, you also close the platform hatch Spoiler with 3rd brake light Hinges in stainless steel Mounting kit and description are included in the delivery
Product number: WMH-FRD
Variants from €3,600.00*
Available in 90 days
Delivery from April
Alternative: VW Hardtops
Carryboy Hardtop with folding window SO-VWAD
VW Amarok Double Cab 2010-2020
Variant - Hardtop version: SO - standard design | Variant - central locking: Without central locking
Carryboy hardtop model SO with tinted folding windows on the side Accessory for Volkswagen Amarok crew cab - available in all vehicle colors side tinted hinged windows with lock Tinted all-glass rear door with heated rear window Front sliding window All side flaps and the tailgate are frameless! Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manually adjustable Automatic on/off switch when opening/closing the tailgate when you close the hardtop rear door, you also close the platform hatch the black aluminum roof rails have been tested with a load capacity of 80 kg Spoiler with 3rd brake light in LED technology Hinges in stainless steel Mounting kit and description are included in the delivery The CARRYBOY hardtop SO-VWAD for the VW Amarok is characterized by its unique design. The tinted glass side flaps of the hard top form a unit with the shell of the hard top. The incomparable design is not insignificantly influenced by the frameless side flaps and the frameless tailgate. No more annoying frames that would disturb the design line of the hardtop and the VW Amarok pickup! The CARRYBOY hardtop SO is the ideal VW Amarok accessory for anyone who wants to access the load compartment from all sides, but at the same time would like to benefit from maximum storage volume. In addition to the hardtop, we also recommend other VW Amarok accessories from CARRYBOY for commercial businesses: MAX-SEAL tailgate seal swing-out storage boxes SWINGCASE for driver and passenger side Load compartment tub in carpet design or as a hard-shell tub pull-out loading floor with integrated drawer system CB-800. For even better illumination of the Amarok loading space, we offer our proven BLight lighting system with 6 practical LED lights that can be attached under the edge of the loading area. The wiring can be connected to the permanent power supply of the hard top.
Product number: SO-VWAD
€3,350.00*
Available in 90 days
Delivery from April
Carryboy hardtop with folding window, sliding window and central locking SO56(R)-VWAD €3,438.01*
VW Amarok Double Cab 2010-2020
Variant - central locking: With central locking
Carryboy hardtop model SO56 a side tinted folding window and a sliding window for Volkswagen Amarok double cab 2010-2020 - available in all body colors tinted folding window on the driver's side tinted sliding window on the passenger side sliding front window Tinted all-glass rear door without rear window heating Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manually adjustable when you close the hardtop rear door, you also close the platform hatch the black, removable roof rails have been tested with a load capacity of 80 kg Hardtop facelift with improved contours and 3rd brake light integrated in the roof Hardened stainless steel hinges Mounting kit and description are included in the delivery
Product number: SO56(R)-VWAD
Variants from €3,200.01*
Available in 90 days
Delivery from April
Show more details
Carryboy Hardtop with folding window SO(N)R-VWAD €3,588.00*
VW Amarok Double Cab 2010-2020
Variant - Hardtop version: SON - New design without spoilers | Variant - central locking: With central locking
Carryboy hardtop model SO(N)R with tinted folding windows on the side for Volkswagen Amarok crew cab - available in all body colors side tinted hinged window with lock and connection ZV Tinted all-glass rear door with rear window heating and ZV connection Front sliding window All side flaps and the tailgate are frameless! Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manually adjustable Automatic on/off switch when opening/closing the tailgate when you close the hardtop rear door, you also close the platform hatch the black aluminum roof rails have been tested with a load capacity of 80 kg 3. Brakes with indicated GRP spoiler Hinges in stainless steel Mounting kit and description are included in the delivery The CARRYBOY hardtop SONR-VWAD for the VW Amarok is characterized by its unique design. The tinted glass side flaps of the hard top form a unit with the shell of the hard top. The incomparable design is not insignificantly influenced by the frameless side flaps and the frameless tailgate. No more annoying frames that would disturb the design line of the hardtop and the VW Amarok pickup! The CARRYBOY hardtop SO is the ideal VW Amarok accessory for anyone who wants to access the load compartment from all sides, but at the same time would like to benefit from maximum storage volume. In addition to the hardtop, we also recommend other VW Amarok accessories from CARRYBOY for commercial businesses: MAX-SEAL tailgate seal swing-out storage boxes SWINGCASE for driver and passenger side Load compartment tub in carpet design or as a hard-shell tub pull-out loading floor with integrated drawer system CB-800. For even better illumination of the Amarok loading space, we offer our proven BLight lighting system with 6 practical LED lights that can be attached under the edge of the loading area. The wiring can be connected to the permanent power supply of the hard top.
Product number: SO(N)R-VWAD
Variants from €3,350.00*
Available in 90 days
Delivery from April
Tip
Carryboy hardtop with glass flaps SLR-IGD
Isuzu D-Max Double Cab 2021+
Variant - central locking: Without central locking
CARRYBOY hardtop model SLR with side tinted folding windows for VW Amarok double cab 2023+ available in all vehicle colors SUV-style side tinted folding windows (with no visible fasteners throughout) Tinted all-glass rear door with heating (SUV style) bow window Bow sliding window optionally available (additional costs) The rear door can also be opened from the inside for safety Interior headliner made of robust, close-meshed black and gray woven fabric no vinyl! - therefore no risk of mildew, easy to clean and repair Interior lamp 3-way manual adjustable Automatic on-off switch when opening and closing the rear door When you close the hardtop rear door, you close the platform flap at the same time The roof rails have been tested with a load capacity of 70 kg GRP spoiler with paint Hinges in stainless steel Assembly kit and description are included in the delivery
Product number: SLR-VRD
€3,350.00*
Available in 90 days
Delivery from April
Carryboy hardtop with vent window and central locking S6(R)-VWAD €3,588.00*
VW Amarok Double Cab 2010-2020
Variant - central locking: With central locking
Carryboy hardtop model S6 with tinted vent windows on the side for VW Amarok double cab 2010-2020 - available in all body colors Lateral, tinted hinged windows in one piece up to the driver's cabin Tinted all-glass rear door with heated rear window sliding front window the rear door can also be opened from the inside for safety 3rd brake light integrated in the rear window Roof lining made of robust, close-meshed black-grey woven fabric No vinyl!!! and therefore no risk of mold stains, easy to clean and repair Interior lamp 3-fold manually adjustable from the inside When you close the hardtop rear door, you also lock the platform hatch Airline roof rail - tested to 80kg for extra loading capacity Stainless steel hinges Mounting kit and description included Spare parts guaranteed even after years
Product number: S6(R)-VWAD
Variants from €3,350.00*
Available in 90 days
Delivery from April
Carryboy Hardtop with side flaps WM-VWAD
VW Amarok double cab year 2010-2020
Variant - central locking: Without central locking
One of our BEST for the Volkswagen Amarok Double Cab 2010-2020 ! our Carryboy professional hardtop model WM - VWAD - Workman, finished in universal white - but also available in any other color. The robust first-class professional hardtop from Carryboy for trade, commerce, sports, leisure and the public sector, an ideal hardtop for the Volkswagen Amarok and the entire pickup vehicle fleet! Front window untinted for maximum ease of loading and unloading thanks to wing flaps the hardtop with the highest through-loading height in our range! Both from behind and from the sides. available in white (painted finish - top coat is clear coat) also available in all vehicle colors from the world market leader Carryboy side GfK wing flaps Tinted all-glass rear window for visibility securely lockable rear door and side flaps with rotary lock and cylinder (optional ZV connection) Hardtop closes the entire cargo area and the tailgate at the same time Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair bright LED interior lamp indicated spoiler with 3rd brake light in LED technology robust hinges in stainless steel on the tailgate and side flaps Mounting kit and description are included in the delivery Equip your Volkswagen Amarok double cab (2010 - 2020) with a high-quality hardtop from CARRYBOY. The WM offers the ideal basis for commercial use. Maximum through-loading height from the sides and rear, as well as the particularly robust design maximize the available hard top interior volume. All components of the hardtop for the VW Amarok were designed and tested for the stressful and frequent use in daily business. The roof rails on this model have been removed in favor of the hardtop height. However, it is possible to install a complete roof rack system on the hard top as an additional accessory. If desired, this can also extend beyond the driver's cab of the VW Amarok. It is available in the sizes 1200x1900mm and 1200x2400mm. Check with us for availability and price. An even more convenient operation of the VW Amarok WM hardtop is possible by connecting it to the vehicle's central locking system. All three flaps are locked or unlocked at the touch of a button on the vehicle key. We round off our offer with our spare parts service. For CARRYBOY hardtops, we will continue to offer the right spare parts for years and decades, even beyond the service range of the vehicle manufacturers.
Product number: WM-VWAD
€3,600.00*
Available in 90 days
Delivery from April
Only 1 available
Tip
Carryboy hardtop with side flaps WM-VRD €3,425.00*
Ford Ranger Double Cab 2012+/2019+
One of our BEST for the Volkswagen Amarok Doublecab 2023+! our Carryboy professional hardtop model WM-Workman, finished in universal white - but also available in any other color. Carryboy's robust first-class professional hardtop for trade, commerce, sports, leisure and the public sector, an ideal hardtop for the vehicle fleet! Bow sliding window optionally available (additional costs) for maximum convenience in loading and unloading available in universal white (painted finish - top coat is clear coat) also available in all vehicle colors from the world market leader Carryboy side GfK flaps Tinted all-glass rear door lockable rear door (chrome lock) the tailgate can be opened from the inside Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manual adjustable Automatic on/off switch when opening/closing the tailgate when you close the hardtop rear door, you also close the platform hatch Spoiler with 3rd brake light Hinges in stainless steel Mounting kit and description are included in the delivery
Product number: WM-VRD.1
Variants from €3,600.00*
Available in 90 days
Delivery from April
Show more details
Carryboy hardtop with sliding window 560-VWAD
VW Amarok Double Cab 2010-2020
Variant - central locking: Without central locking
Carryboy hardtop model 560 with tinted sliding windows on the side for Volkswagen Amarok Double Cab 2010-2020 - in all body colors. tinted sliding side windows sliding front window Tinted all-glass rear door with heated rear window Roof liner made of robust, close-meshed black-grey woven fabric no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3-way manually adjustable Automatic on/off switch when opening/closing the tailgate when you close the hardtop rear door, you also close the platform hatch the black aluminum roof rails have been tested with a load capacity of 80 kg Spoiler with 3rd brake light Hinges in stainless steel Mounting kit and description are included in the delivery The CARRYBOY Hardtop 560-VWAD for the VW Amarok is characterized by its unique design. The tinted glass sliding hardtop windows form a unit with the hardtop shell. The frame of the sliding window adapts perfectly to the contour of the hard top. No more protruding window frames that would disturb the design line of the hardtop and the VW Amarok pickup! The CARRYBOY Hardtop 560 is the ideal VW Amarok accessory for all dog owners. Your animal will thank you. The large sliding windows on all sides ensure sufficient air supply in the hard top. In order to be able to open the windows completely, we offer specially developed dog guards for installation on the windows. The Hardtop 560 also offers ideal properties for everyday use for all other users. Convenient use, durability, plenty of light in the cargo area and fuel savings of up to 10%! In addition, we ensure the supply of spare parts for all our hardtops for many years. Even in the event of damage, the GRP material used is characterized by its high user and repair friendliness. An even more convenient operation of the VW Amarok hardtop is possible with an optional connection to the vehicle's ZV!
Product number: 560-VWAD
€3,075.00*
Available in 90 days
Delivery from April
Show more details
Carryboy hardtop without windows, with central locking 560oS(R)-VWAD €3,137.99*
VW Amarok Double Cab 2010-2020
Variant - central locking: With central locking
Carryboy hardtop model 560 without side window for Volkswagen Amarok double cab 2010-2020 - available in all body colors. Standard version: without side windows, closed sides in one piece bow sliding window 2-component primer tinted all-glass rear door with heated rear window Headliner made of robust, close-meshed black-grey woven fabric, no vinyl! - therefore no risk of mold stains, easy to clean and repair Interior lamp 3 times manually adjustable from the inside, automatic on/off switch when Opening/closing the tailgate when you lock the hardtop rear door, you also lock the platform hatch the black, removable roof rails have been tested up to 80 kg Spoiler with 3rd brake light Hinges in stainless steel Construction without drilling. Installation with load compartment tray possible Mounting kit and description are included in the delivery The CARRYBOY hardtop without side windows for the Volkswagen Amarok is ideal for commercial use. Robust GRP material, high-quality paintwork and privacy protection from both sides also allow valuable goods to be transported on the loading area of your Amarok. The hardtop 560oS for the VW Amarok has a glass rear window with rear window heating for an unobstructed view to the rear, this can also be replaced with a painted tailgate if desired. With CARRYBOY hardtops you also secure our spare parts service. Benefit from a secure supply of spare parts beyond the manufacturer's service range.
Product number: 560oS(R)-VWAD
Variants from €2,899.99*
Available in 90 days
Delivery from April
Only 2 available
Carryboy hardtopwithout side windows SR5oS-VRD €2,700.00*
Isuzu Dmax Double Cab 2021+
The high-quality CARRYBOY hardtop model SR5oS from Carryboy is the perfect extension for your double cab pickup VW Amarok 2023+. Benefit from our strong CARRYBOY hardtop model SR5 from Carryboy for your Volkswagen Amarok double cab. Our hardtop for your Amarok 2023+ double cab (Doublecab) adapts seamlessly to your vehicle. The hardtop offers your pickup high-quality and comfortable protection. High-quality CARRYBOY design in SUV style available in all colors. Choose a custom-made hardtop in the color of your car, which comes with a mounting kit and installation instructions. If you have any questions, you can contact us at any time. We can professionally assemble the hardtop if necessary. Our employees are technically skilled, technically competent and practically experienced ! All equipment at a glance: no windows on the side / closed hardtop All-glass rear window : Large and tinted for maximum ease of loading and unloading, including rear window heating Untinted front window manual lock , optionally with automatic central locking Integrated spoiler with built-in 3rd brake light in LED technology (on vehicles without a 3rd brake light in the tailgate) Available in all vehicle colors No vinyl! The interior headliner is made of robust, close-meshed, black and gray woven fabric. This means there is no risk of mildew and the fabric is easy to clean and repair Rear door with robust stainless steel hinges Roof rails Mounting kit and instructions for your hardtop are included Hardtop at cabin height Bright LED interior lamp with automatic function Our recommendation for your Volkswagen Amarok 2023+ double cab Best service from a single source - before and after the purchase Take advantage of our first-class service! Questions or uncertainties? Talk to us by email or telephone! We would be happy to advise you in detail and in a customer-oriented manner . We work in the office AND warehouse every day. We have a wealth of experience spanning 16 years of practical performance. You can look forward to technically skilled, technically competent and practically experienced employees. Our unique spare parts (service) offers you spare parts for at least 10 years after product purchase! Our hardtop SR5 perfectly complements your VW Amarok double cab (Doublecab) built in 2023+. Protect your environment by using our products for life! Hardtops from CARRYBOY! Are you worried about sustainability or long-term use? No problem! Our products achieve sustainability through lifelong usability. The high-quality parts used are very robust. Quality hardtop model SR5 for your VW Amarok double cab 2023+ fully equipped from CARRYBOY The hardtop has cabin height . A smooth transition between the cabin and the hardtop increases the visual and stylistic value. Our SR5-VRD for your VW Amarok double cab (Doublecab) fully equipped includes an untinted front window . This does not affect your view to the rear. The particularly large, tinted all-glass rear window on our hardtop model SR5 for your Volkswagen Amarok 2023+ double cab enables convenient loading and unloading. At the same time, the large rear window allows for good visibility. Robust and rust-free hinges are used to attach the rear door. Our hardtop for your VW Amarok has a manual lock . Two keys are included for convenient opening and locking of the new Volkswagen Amarok double cab hardtop. The SR5 contains an integrated spoiler with a third brake light in LED technology (if the vehicle does not have a brake light in the tailgate). At the customer's request, we paint the SR5 hardtop in any vehicle color and many desired colors . Alternatively it can be supplied primed. You can rely on high-quality materials not only on the outside, but also on the inside. A bright LED interior lamp illuminates our hardtop model SR5 for your Amarok double cab 2023+. We do not use vinyl for the interior headliner of your VW Amarok Hardtop Double Cab (Doublecab) built in 2023+! We only use robust, close-meshed, black and gray woven fabric . We do not use vinyl headliners, so there is no risk of mildew, is easy to clean and repair, and looks high quality. The shell of all our Carryboy hardtops are made of GRP (fiberglass plastic). The material has a number of advantages over alternative materials. GRP is light, robust and easy to repair and maintain. For example, in recreational shipbuilding, it is preferred and used as standard due to these advantages. The ideal base material for your VW Amarok hardtop!
Product number: SR5oS-VRD.1
Variants from €2,899.99*
Available in 90 days
Delivery from April
Show more details
