NOVISauto sports bar Black Edition GRFS-Sportbar2 for US vehicle models

NOVISauto - edge protection for the pickup tailgate of your Ford Ranger from year of construction 2012+ Effectively and inexpensively protect the scratch-prone upper edge of the tailgate of your 2010-2020 Ford Ranger! The NOVISAuto protective strip for the Ford Ranger tailgate offers long-lasting and very effective protection against scratches in the paintwork. Ideally suited if you already have a built-in loading space liner without edge protection or if the loading space is protected with a coating - because the edges of the loading area are still unprotected with both systems! The protective cap / rubbing strip for the Ford Ranger tailgate was developed for lasting protection against scratches, dents and dents. A close fit with smooth machined edges and durable plastic material make our Ford Ranger Edge Cover Moldings an excellent addition to your vehicle. The thickness of the edge protection is 3mm, up to 4mm in particularly stressed areas. The NOVISAuto Bushwacker protective strip is made of high-quality DURA-FLEX 2000 plastic. This plastic is very durable, impact and scratch-resistant and designed for all seasons. Harmful sun rays cannot harm your plastic edge protection, because the material does not fade. The surface is visually and haptically appealing with a slightly rough black surface.

NOVISauto care spray "TONNO TONIC"  for all luggage compartment covers and tarpaulins made of ABS hard plastic and vinyl. Tonno Tonic cares, cleans and gives your cover a fresh shine in a single step -  it effectively protects against UV light. Tonno Tonic has been thoroughly tested and is 100% suitable for protecting all ABS hard plastic and vinyl covers.  Remember to take care of your cover regularly!  - she will thank you with a good, fresh appearance and a long life! Tonno Tonic protects against harsh weather, cold winter and hot summer days. For care, simply spray Tonno Tonic on the previously cleaned tarpaulin. Wipe the surface dry with a clean cloth. Feel free to use Tonno Tonic to clean your tires - please wait 5 minutes after spraying before you can wipe the tire surface dry. Your rims will not be damaged. Tonno Tonic is available in a 0.47 liter spray bottle or as a 6-pack for dealers.

Load compartment liner lower edge for Nissan Navara D40 double cab (long bed 161cm) Dimensionally stable, extremely hard-wearing and durable - therefore the best protection against scratches and damage to the loading area Protection against negative environmental influences (e.g. chemicals, acids, rust, etc.) precisely fitting and easy to assemble - no drilling required in the vehicle platform ideally suited for an exceptionally long service life it is stable and easy to use for a variety of commercial uses made of durable polyethylene (HDPE) Tailgate protection with edge included Economical in daily use, as it protects the paintwork at low cost Accesories Tailgate protection included assembly description with the necessary mounting accessories  

Equip your Ford Ranger extra cab (Spacecab), double cab or single cab (Singlecab) built in 2023+ with a CARRYBOY tailgate damper 111. Increase the usability of your pickup and increase comfort. With accessories from the Comfort & Ease of Use section. Ford Ranger accessories seamlessly adapt to your vehicle. Opt for a bespoke accessory that comes with a mounting kit and installation instructions. If you have any questions, you can contact us at any time. If you wish, we would be happy to professionally assemble the accessories for you. Take advantage of our strong CARRYBOY accessory model tailgate damper 111 from Carryboy for your Ford Ranger extra cab (Spacecab), double cab or single cab (single cab) built in 2023+. Your advantages summarized: for Ford Ranger extra cab/1.5 cab (Kingcab), double cab (Doublecab), single cab (Singlecab) year of construction from 2023+ CARRYBOY accessories manufactured by CARRYBOY Accessories designed for comfort & ease of use - black Mounting type: screws approximate assembly time: 10 min special feature: easy opening and high compatibility particularly suitable for: convenient use and simple application Attaches to tailgate and side Storage space approx. 0.5 m³ Our recommendation for your Ford Ranger Extra Cab (Spacecab), Double Cab, Single Cab (Singlecab) Our first-class CARRYBOY accessory tailgate damper 111 from Carryboy for your Ford Ranger 2023+ extra cabin (Spacecab), double cabin or single cabin (Singlecab) is suitable for every purpose! It is an ideal accessory for convenient use and easy application. Use the accessories for leisure and business! Best service - before and after the purchase You can rely on our service! Uncertainties or questions? Ask us by email or phone! We would be happy to advise you in detail and in a customer-oriented manner . Due to our daily work in the office AND warehouse, as well as our extensive wealth of experience thanks to 16 years of practical work, we are technically adept, technically competent and have practical experience. Are you concerned about sustainability or long-term use? No problem! The use of high-quality materials, raw materials and parts enables our accessories to have a long service life and useful life. Sustainability is achieved through lifelong use and thus the saving of resources for new production. More comfort and increased user-friendliness with CARRYBOY tailgate dampers 111 The accessory Carryboy tailgate damper 111 is delivered in black . The Carryboy CB-111-FT tailgate damper gas pressure spring is installed on the tailgate, on the side . The approximate installation time is 10 minutes on your Ford Ranger. Mounting with screws allows for better stability of the accessories. The accessory is particularly secure thanks to screws. The special features of the accessories are: easy opening and high compatibility . Convenient to use and easy to use : in summary, the CARRYBOY tailgate damper 111 accessory for your Ford Ranger extra cab/1.5 cab (Kingcab), double cab (Doublecab) or single cab (Singlecab) from 2023+ is particularly suitable for this.

CARRYBOY tailgate damper CB-111 on Stabilus - shock absorber base for Ford Ranger 2012+ for Ford Ranger 2012+ Double Cab / Extra Cab / Single Cab Simple installation on existing screw connections and threads two stable, matt black coated brackets for chassis and tailgate durable Stabilus gas pressure damper The tailgate slowly slides open into the end position Tailgate damper prevents the tailgate from accidentally "falling down". suitable with all accessories, as it is installed directly in the cavity between the side wall and the tailgate

CARRYBOY tailgate damper CB-111 on Stabilus - shock absorber base for Isuzu D-Max 2021+ for Isuzu D-Max 2021+ Double Cab / Spacecab / Singlecab Simple installation on existing screw connections and threads two stable, matt black coated brackets for chassis and tailgate durable Stabilus gas pressure damper The tailgate slowly slides open into the end position Tailgate damper prevents the tailgate from accidentally "falling down". suitable with all accessories, as it is installed directly in the cavity between the side wall and the tailgate

CARRYBOY tailgate damper CB-111 on Stabilus - shock absorber base for Isuzu D-Max 2021+ for Isuzu D-Max 2021+ Double Cab / Spacecab / Singlecab Simple installation on existing screw connections and threads two stable, matt black coated brackets for chassis and tailgate durable Stabilus gas pressure damper The tailgate slowly slides open into the end position Tailgate damper prevents the tailgate from accidentally "falling down". suitable with all accessories, as it is installed directly in the cavity between the side wall and the tailgate

CARRYBOY tailgate damper CB-111 on Stabilus - shock absorber basis for Mitusbishi L200 / Fiat Fullback 2016+ for Mitsubishi L200 / Fiat Fullback 2016+ Simple installation on existing screw connections and threads two stable, matt black coated brackets for chassis and tailgate durable Stabilus gas pressure damper The tailgate slowly slides open into the end position Tailgate damper prevents the tailgate from accidentally "falling down". suitable with all accessories, as it is installed directly in the cavity between the side wall and the tailgate

CARRYBOY tailgate damper CB-111 on Stabilus - shock absorber base for Toyota Hilux 2016+ for Toyota Hilux 2016+ / 2021+ Invincible Simple installation on existing screw connections and threads two stable, matt black coated brackets for chassis and tailgate durable Stabilus gas pressure damper The tailgate slowly slides open into the end position Tailgate damper prevents the tailgate from accidentally "falling down". suitable with all accessories, as it is installed directly in the cavity between the side wall and the tailgate

CARRYBOY - aluminum cross member elliptical shape for mounting on all CARRYBOY hardtops with roof rails Length of the crossbars 125 cm Sturdy aluminum with a satin finish Including rubber insert Including attachments (matching feet) for the hardtop roof rails Can be attached to the hardtop without drilling When ordering, please name the built-in hardtop / cargo area roller blind - model The crossbars are ideal for attaching the CARRYBOY roof baskets - available in 5 different sizes.

CARRYBOY - aluminum cross member elliptical shape for mounting on all CARRYBOY hardtops with roof rails Length of the crossbars 125 cm Sturdy aluminum with a satin finish Including rubber insert Including attachments (matching feet) for the hardtop roof rails Can be attached to the hardtop without drilling When ordering, please name the built-in hardtop / cargo area roller blind - model The crossbars are ideal for attaching the CARRYBOY roof baskets - available in 5 different sizes.

Carryboy - full bed pull-out shelf  -  Pull-out shelf cut out of aluminum checker plate according to the contour of the wheel housing This extendable loading floor is also available in combination with a drawer system in different sizes (CB-800). - Load capacity up to 350 kg! - Easy loading and unloading - you save time with it! - Non-slip, hard-wearing, easy-to-clean loading surface made of aluminum checker plate - best quality in processing and design - dimensionally stable, unbreakable and loadable up to approx. 350 kg - secure supply of spare parts - Simple assembly according to video and written assembly instructions - Convenient securing of the load with the integrated lashing eyes - The ball-bearing loading floor is unlocked with the handle - The loading area is almost completely filled - Wheel housings are cut out A notice:  these products are so-called selection products, which are individually manufactured to your order. This pull-out drawer is divided into S / M / L categories in terms of dimensions. Due to the rectangular shape, the loading floor fits on different vehicles. As an option, the loading floor can be fully adapted to the vehicle. The area of the accessory drawer is expanded to include the area behind the wheel arches. When ordering, please indicate the vehicle in question so that we can assign you the right vehicle. You can also choose between the pull-out loading floor in aluminum or covered with an anti-slip rubber coating.

Carryboy - Slide Floor Universal  -  Pull-out shelf made of aluminum checker plate with a three-sided frame for all mid-size pickup trucks This extendable loading floor is also available in combination with a drawer system in different sizes (CB-800). - Load capacity up to 350 kg! - Easy loading and unloading - you save time with it! - Non-slip, hard-wearing, easy-to-clean loading surface made of aluminum checker plate - best quality in processing and design - dimensionally stable, unbreakable and loadable up to approx. 350 kg - secure supply of spare parts - Simple assembly according to video and written assembly instructions - Convenient securing of the load with the integrated lashing eyes - The ball-bearing loading floor is unlocked with the handle. A notice:  these products are so-called selection products, which are individually manufactured to your order. This pull-out drawer is divided into S / M / L categories in terms of dimensions. Due to the rectangular shape, the loading floor fits on different vehicles. As an option, the loading floor can be fully adapted to the vehicle. The area of the accessory drawer is expanded to include the area behind the wheel arches. The universal loading floor CB-778 is available as an accessory for these pickup vehicles with the following dimensions: Size S (1020*1380*208) - Toyota Hilux Revo, Isuzu Dmax, Mitsubishi L200, Fiat Fullback Size M (1080*1380*208) - Ford Ranger, Nissan Navara NP300, Renault Alaskan Size L (1200*1440*208) - VW Amarok Size XL - with the appropriate width, but 1700 mm length for single and extracab pickups. When ordering, please indicate the vehicle in question so that we can assign you the right vehicle. You can also choose between the pull-out loading floor in aluminum or covered with an anti-slip rubber coating.

Equip your Ford Ranger 2023+, Isuzu D-Max 2021+ with a CARRYBOY 778 loading floor extension. Expand and protect your storage space for everyday use. With accessories from the stowage & transport solutions section. Our accessories for your Ford Ranger 2023+, Isuzu D-Max 2021+ Double cab (Doublecab) built up to 2022 adapts seamlessly to your vehicle. Mounting kit and installation instructions are included. If necessary, you can watch our assembly videos on Youtube. If you have any questions, you can contact us at any time. Have your accessories assembled by our technically experienced, professionally competent and practically experienced employees on request! Benefit from our strong Carryboy accessory model 778 loading floor extension for your Ford Ranger 2023+, Isuzu D-Max 2021+ double cabin. More space, more fun - loading floor pull-out 778 from CARRYBOY as ideal storage and transport solutions The accessory model "Load floor pull-out 778" from CARRYBOY for your Ford Ranger 2023+, Isuzu D-Max 2021+ double cab is particularly UV-resistant . This increases the life of the accessory - it is protected from the sun and fading. The durable accessory loading floor pull-out 778 from CARRYBOY is particularly scratch-resistant . A long use in top condition without major signs of use is made possible. Load your truck from the sides or the back. Our accessories do not block your access . The CARRYBOY 778 loading floor extension accessory is made of steel and aluminum for your Ford Ranger 2023+, Isuzu D-Max 2021+ double cab. Low weight, robustness, stability and durability are the special properties of aluminium . Among other things, the accessory uses loading floor extension 778 for your Ford Ranger 2023+, Isuzu D-Max 2021+ aluminum for this reason. The advantages of steel cannot be denied. Steel is strong, resilient and stable. This means that your accessories are well prepared for loads. Accessories Carryboy loading floor pull-out 778 is impact-resistant and thus offers effective protection against sudden loads. The loading floor pull-out accessory 778 can withstand 350 kg . The CARRYBOY loading floor pull-out rectangular 350kg is installed on the flatbed . You will need approximately 1-3 hours to fit the cover on your Ford Ranger 2023+, Isuzu D-Max 2021+. The assembly takes place without drilling. The loading floor pull-out is attached to the platform edge to ensure stability. The special features of the accessories are: easy to open, robust, versatile, extendable and easy to clean . In summary, the CARRYBOY 778 loading floor extension accessory is for your Ford Ranger 2023+, Isuzu D-Max 2021+ double cab particularly suitable for: trade, daily use, comfortable use, extreme stress, frequent use, simple use and professionals . The entire equipment at a glance: for Ford Ranger 2023+, Isuzu D-Max 2021+Double Cab CARRYBOY accessories manufactured by CARRYBOY Accessories suitable for storage & transport solutions particularly UV-resistant scratch resistant Loading area fully accessible Type of installation: without drilling Material: steel and aluminum approximate assembly time: 1-3 h particularly shockproof: yes Load capacity: 350 kg special feature: easy to open, robust, versatile, extendable and easy to clean particularly suitable for: trade, daily use, comfortable use, extreme stress, frequent use, simple use and professionals Our recommendation for your pickup truck Our first-class CARRYBOY accessory loading floor pull-out 778 from Carryboy for your Ford Ranger 2023+, Isuzu D-Max 2021+ Double cab is suitable for every purpose! It is an ideal accessory for commercial, daily use, convenient use, heavy duty use, frequent use, easy use and professional. Use the accessories for leisure and business! Our service to you - before and after the purchase Rely on our service! uncertainties? Questions? Contact us by email or phone! We would be happy to advise you in detail and in a customer-oriented manner . Due to our daily work in the office AND warehouse, as well as our extensive wealth of experience thanks to 16 years of practical work, we are technically adept, technically competent and have practical experience. Is long-term use and thus sustainability important to you? No problem! A long service life and useful life of our accessories is made possible by the use of high-quality parts, raw materials and materials. Sustainability is achieved through lifelong use and thus the saving of resources for new production.

Rüsten Sie Ihren Ford Ranger, Isuzu D-Max, Mitsubishi L200, Nissan Navara und Toyota Hilux Doppelkabine,Einzelkabine,Extrakabine Baujahr(e) ab 2016+ mit einer bonnet opener 106 von CARRYBOY aus. Erhöhen Sie die Benutzerfreundlichkeit Ihres Pickups und steigern Sie den Komfort. Mit Zubehör aus der Rubrik Komfort & Benutzerfreundlichkeit. Unser Zubehör für Ihren Ford Ranger, Isuzu D-Max, Mitsubishi L200, Nissan Navara, Toyota Hilux Doppelkabiner (Doublecab),Einzelkabiner (Singlecab),Extrakabiner/1,5-Kabine (Kingcab) ab Baujahr 2016 passt sich nahtlos Ihrem Fahrzeug an. Montagekit und Einbauanleitung werden mitgeliefert. Optional können Sie sich unsere Montagevideos auf Youtube anschauen. Bei Fragen können Sie uns jederzeit kontaktieren. Auf Wunsch übernehmen wir den fachmännischen Aufbau des Zubehörs. Unsere Mitarbeiter sind technisch versiert, fachlich kompetent und praktisch erfahren! Das CARRYBOY Zubehör Modell bonnet opener 106 von Carryboy sind unsere empfehlenswerten Modelle für Ihren Ford Ranger, Isuzu D-Max, Mitsubishi L200, Nissan Navara, Toyota Hilux Doppelkabine,Einzelkabine,Extrakabine Baujahr ab 2016+. Ihre Vorteile zusammengefasst: für Ford Ranger, Isuzu D-Max, Mitsubishi L200, Nissan Navara, Toyota Hilux Doppelkabine (Doublecab),Einzelkabine (Singlecab),Extrakabine/1,5-Kabine (Kingcab) Baujahr ab 2016+ CARRYBOY Zubehör hergestellt von CARRYBOY Zubehör geeignet für Komfort & Benutzerfreundlichkeit Montageart: schrauben ungefähre Montagezeit: 15 min besonderes Merkmal: einfaches Öffnen und extrem kurze Einbauzeit besonders geeignet für: bequeme Nutzung, einfache Anwendung und täglicher Gebrauch Befestigt an der Motorhaube Stauraum ca. 0,5 m³ Unsere Empfehlung für Ihren Pickup-Truck Unser erstklassiges CARRYBOY Zubehör bonnet opener 106 von Carryboy für Ihren Ford Ranger, Isuzu D-Max, Mitsubishi L200, Nissan Navara oder Toyota Hilux ab 2016+ Doppelkabine,Einzelkabine,Extrakabine ist für jeden Einsatzzweck geeignet! Es ist ein ideales Zubehör für bequeme Nutzung, einfache Anwendung und täglicher Gebrauch. Nutzen Sie das Zubehör für Freizeit und Gewerbe! Unser Service an Sie - vor dem Kauf, als auch nach dem Kauf Sie können sich auf unseren Service verlassen! Unsicherheiten oder Fragen? Sprechen Sie mit uns per Mail oder Telefon! Freuen Sie sich auf eine ausführliche und kundenorientierte Beratung. Wir arbeiten täglich im Büro UND Lager. Wir haben einen weitreichenden Erfahrungsschatz über 16 Jahre an praktischer Leistung. Freuen Sie sich auf technisch versierte, fachlich kompetente und praktisch erfahrene Mitarbeiter. Langfristige Nutzung und somit Nachhaltigkeit ist Ihnen wichtig? Kein Problem! Hochwertige Materialien, Teile und Rohstoffe ermöglichen eine lange Lebens- und Nutzungsdauer unseres Zubehörs. Nachhaltigkeit wird durch eine lebenslange Nutzung und damit das Sparen von Ressourcen zur Neuherstellung erreicht. Mehr Komfort und erhöhte Benutzerfreundlichkeit durch CARRYBOY bonnet opener 106 Die Montage des Carryboy Motorhaubenöffner CB-106 erfolgt auf der Motorhaube. Ungefähr 15 min werden für die Montage der Abdeckung auf Ihren Ford Ranger, Isuzu D-Max, Mitsubishi L200, Nissan Navara, Toyota Hilux benötigt. Eine Montage mit schrauben ermöglicht eine bessere Standfestigkeit des Zubehörs. Durch schrauben sitzt das Zubehör besonders sicher an. Einfaches Öffnen und extrem kurze Einbauzeit: Das sind die besonderen Merkmale des Zubehörs. Zusammenfassend ist das Zubehör bonnet opener 106 von CARRYBOY für Ihren Ford Ranger, Isuzu D-Max, Mitsubishi L200, Nissan Navara, Toyota Hilux Doppelkabine (Doublecab),Einzelkabine (Singlecab),Extrakabine/1,5-Kabine (Kingcab) ab 2016+ besonders geeignet für: Bequeme Nutzung, einfache Anwendung und täglicher Gebrauch.

Item No. CB-550x CARRYBOY - roof basket made of stainless steel, light and very stable aluminum with matching crossbars Available in 4 different sizes and 2 colors (silver or black): CB-550x-00    100*100cm CB-550x-01    100*120cm CB-550x-02    100*160cm CB-550x-03    100*130cm   The luggage rack can be mounted on most cars, SUVs, VANs, pickups, trucks and Carryboy hardtops with suitable fasteners (self-assembly is possible). - No drilling required! - Dimensionally stable, unbreakable and resilient - easy to assemble - do it yourself - - available in different dimensions - secure supply of spare parts The roof basket is supplied with crossbars and can be attached to the roof rails using the mounting kit supplied. Appropriate fasteners (roof racks) are required for attachment to SUVs and pickup truck cabs. If you have any questions, please contact us by telephone on 02151-393593 or by e-mail at info@carryboy.de Please ask for delivery times for additional sizes.

Item No. CB-550x CARRYBOY - roof basket made of stainless steel, light and very stable aluminum with matching crossbars Available in 4 different sizes and 2 colors (silver or black): CB-550x-00    100*100cm CB-550x-01    100*120cm CB-550x-02    100*160cm CB-550x-03    100*130cm   The luggage rack can be mounted on most cars, SUVs, VANs, pickups, trucks and Carryboy hardtops with suitable fasteners (self-assembly is possible). - No drilling required! - Dimensionally stable, unbreakable and resilient - easy to assemble - do it yourself - - available in different dimensions - secure supply of spare parts The roof basket is supplied with crossbars and can be attached to the roof rails using the mounting kit supplied. Appropriate fasteners (roof racks) are required for attachment to SUVs and pickup truck cabs. If you have any questions, please contact us by telephone on 02151-393593 or by e-mail at info@carryboy.de Please ask for delivery times for additional sizes.

Item No. CB-550x CARRYBOY - roof basket made of stainless steel, light and very stable aluminum with matching crossbars Available in 4 different sizes and 2 colors (silver or black): CB-550x-00    100*100cm CB-550x-01    100*120cm CB-550x-02    100*160cm CB-550x-03    100*130cm   The luggage rack can be mounted on most cars, SUVs, VANs, pickups, trucks and Carryboy hardtops with suitable fasteners (self-assembly is possible). - No drilling required! - Dimensionally stable, unbreakable and resilient - easy to assemble - do it yourself - - available in different dimensions - secure supply of spare parts The roof basket is supplied with crossbars and can be attached to the roof rails using the mounting kit supplied. Appropriate fasteners (roof racks) are required for attachment to SUVs and pickup truck cabs. If you have any questions, please contact us by telephone on 02151-393593 or by e-mail at info@carryboy.de Please ask for delivery times for additional sizes.

Item No. CB-550x CARRYBOY - roof basket made of stainless steel, light and very stable aluminum with matching crossbars Available in 4 different sizes and 2 colors (silver or black): CB-550x-00    100*100cm CB-550x-01    100*120cm CB-550x-02    100*160cm CB-550x-03    100*130cm   The luggage rack can be mounted on most cars, SUVs, VANs, pickups, trucks and Carryboy hardtops with suitable fasteners (self-assembly is possible). - No drilling required! - Dimensionally stable, unbreakable and resilient - easy to assemble - do it yourself - - available in different dimensions - secure supply of spare parts The roof basket is supplied with crossbars and can be attached to the roof rails using the mounting kit supplied. Appropriate fasteners (roof racks) are required for attachment to SUVs and pickup truck cabs. If you have any questions, please contact us by telephone on 02151-393593 or by e-mail at info@carryboy.de Please ask for delivery times for additional sizes.

Item No. CB-550x CARRYBOY - roof basket made of stainless steel, light and very stable aluminum with matching crossbars Available in 4 different sizes and 2 colors (silver or black): CB-550x-00    100*100cm CB-550x-01    100*120cm CB-550x-02    100*160cm CB-550x-03    100*130cm   The luggage rack can be mounted on most cars, SUVs, VANs, pickups, trucks and Carryboy hardtops with suitable fasteners (self-assembly is possible). - No drilling required! - Dimensionally stable, unbreakable and resilient - easy to assemble - do it yourself - - available in different dimensions - secure supply of spare parts The roof basket is supplied with crossbars and can be attached to the roof rails using the mounting kit supplied. Appropriate fasteners (roof racks) are required for attachment to SUVs and pickup truck cabs. If you have any questions, please contact us by telephone on 02151-393593 or by e-mail at info@carryboy.de Please ask for delivery times for additional sizes.

Item No. CB-550x CARRYBOY - roof basket made of stainless steel, light and very stable aluminum with matching crossbars Available in 4 different sizes and 2 colors (silver or black): CB-550x-00    100*100cm CB-550x-01    100*120cm CB-550x-02    100*160cm CB-550x-03    100*130cm   The luggage rack can be mounted on most cars, SUVs, VANs, pickups, trucks and Carryboy hardtops with suitable fasteners (self-assembly is possible). - No drilling required! - Dimensionally stable, unbreakable and resilient - easy to assemble - do it yourself - - available in different dimensions - secure supply of spare parts The roof basket is supplied with crossbars and can be attached to the roof rails using the mounting kit supplied. Appropriate fasteners (roof racks) are required for attachment to SUVs and pickup truck cabs. If you have any questions, please contact us by telephone on 02151-393593 or by e-mail at info@carryboy.de Please ask for delivery times for additional sizes.

Item No. CB-550x CARRYBOY - roof basket made of stainless steel, light and very stable aluminum with matching crossbars Available in 4 different sizes and 2 colors (silver or black): CB-550x-00    100*100cm CB-550x-01    100*120cm CB-550x-02    100*160cm CB-550x-03    100*130cm   The luggage rack can be mounted on most cars, SUVs, VANs, pickups, trucks and Carryboy hardtops with suitable fasteners (self-assembly is possible). - No drilling required! - Dimensionally stable, unbreakable and resilient - easy to assemble - do it yourself - - available in different dimensions - secure supply of spare parts The roof basket is supplied with crossbars and can be attached to the roof rails using the mounting kit supplied. Appropriate fasteners (roof racks) are required for attachment to SUVs and pickup truck cabs. If you have any questions, please contact us by telephone on 02151-393593 or by e-mail at info@carryboy.de Please ask for delivery times for additional sizes.

Item No. CB-763-2400A CARRYBOY - Roof Rack Tradesman 120 x 240 cm with attachment The luggage rack can be mounted on the CSV Tradesman special body (suitable for models CSV, S560, SO, S8, S7, S6) with suitable fastening elements. - Best quality in processing and design - at an attractive price - dimensionally stable, unbreakable and resilient - easy to assemble Also available in dimensions: 120 x 190 cm - Article no. CB-763-1900A for double cabin / extra cabin The CARRYBOY roof rack in hammer finish is supplied with the appropriate holders for the desired hardtop / box body. If your hardtop already has roof rails, we recommend sealing the existing holes in advance. The holders for the roof load system have different attachment points that have to be created on site on the hard top / box body. CARRYBOY has been building accessories for small pickup trucks: hardtops, tonneau covers, roll bars, running boards, roof racks, bumpers since 1969. We build hundreds of hardtops and tonneau covers and much more every day, which are sold in more than 150 countries worldwide.

Item No. CB-763-1900A CARRYBOY - Roof RacksTradesman 120 x190 cm with attachment The luggage carrier can be attached to the special CSV Tradesman (or  suitable for models CSV, S560, SO, S8, S7, S6). - Best quality in processing and design - at an attractive price - dimensionally stable, unbreakable and resilient - easy to assemble Also available in dimensions: 120 x 240 cm - Item No. CB-763-2400F for Single Cab The roof basket is supplied with crossbars and can be attached to the roof rails of a CARRYBOY hardtop using the assembly kit supplied, but also to rails from other manufacturers (see explanations below). Suitable fastening elements are required for attachment to SUVs, to the cabs of pickup trucks, which can be ordered separately. CARRYBOY has been building accessories for small pickup trucks: hardtops, tonneau covers, roll bars, running boards, roof racks, bumpers since 1969. We build hundreds of hardtops and tonneau covers and much more every day, which are sold in more than 150 countries worldwide.