Tool box 'SwingCase' SC304 - swing out - UCJG20
Jeep Gladiator 2020+
€385.00*
Product information "Tool box 'SwingCase' SC304 - swing out - UCJG20"
NOVISauto – SwingCase for the Jeep Gladiator 2020+
The ultra-practical box for tools, sporting goods and lots of small parts!
You can reach your tools and small parts by effortlessly detaching your SwingCase box from the holder with just one movement and swiveling it towards you. No slouching or "bunk climbing" is more needed! NOVISauto, the leader in selling popular Jeep Gladiator 2020+ accessories, builds these versatile storage boxes out of high-impact ABS hard plastic for your comfort - strong enough for a long Jeep Gladiator. SwingCase is "tough", it is waterproof, space-saving and therefore ideally suited for your gladiator. - Purchasing two SwingCases for both sides of your Jeep Gladiator platform wall is the best choice - space-saving, completely leak-proof and easy to handle!
Raise, lift off and take with you in a single operation, always ready to hand on any occasion: You take the SwingCase with you to your construction site or workplace - together with all the packed tools and assembly parts! SwingCase can be parked lying down or standing as usual. To save space, fix the SwingCase tool box to the side between the platform flap and the wheel housing on the Gladiator with all loading area lengths.
SwingCase for your new Jeep Gladiator Truck can be swung out , and thus fills the previously unused platform space between the wheel housing and tailgate - adapted for every pickup of all vehicle manufacturers, models and years of manufacture. The box can be locked with a rotary lock and permanently locked with a key. SwingCase is made of tough and durable ABS rigid plastic, strong enough to hold a weight of up to 34kg. The tool box is resistant to UV radiation and does not fade.
In addition, the tool box can be secured to the vehicle with a small padlock. This locking device is already included in many new swing case storage box series.
The tool box (tool box) and storage box is an essential Jeep Gladiator accessory for every tradesman or hobby - do-it-yourselfers.
The initial installation takes only about 15 minutes with 6 self-tapping sheet metal screws. Please note that the swing case cannot be installed in combination with an extendable loading floor. In the case of Jeep Gladiator pickups with an inserted load compartment tub, this must be cut out in two places to ensure that the swing case tool box is held securely. This is the only way to ensure that the bracket fits perfectly on the vehicle.
| Construction year: | 2020, 2021, 2022, 2023 |
|---|---|
| Length of truck bed: | Products for all truck bed lengths |
| Make/Model: | jeep gladiator |
| ⓘ Accessories category: | storage & transport solutions |
| ⓘ Carrying capacity: | 34 kg |
| ⓘ Latch and lock: | Padlock, turn lock |
| ⓘ Materials: | ABS: composite material |
| ⓘ Own weight: | approx. 10 kg |
| ⓘ Place of attachment: | laterally, truck bed |
| ⓘ Shockproof: | yes |
| ⓘ Surface finish: | textured: glossy black |
| ⓘ approximate assembly time: | 15-30 min |
| ⓘ color: | black |
| ⓘ installation type: | no drilling, self-cutting screws |
| ⓘ lockable: | yes |
| ⓘ scratch resistant: | yes |
| ⓘ special feature: | portable, robust, swivels out, versatile use, weather proof |
| Untertitel: | Jeep Gladiator 2020+ |
| Serie: | Modell SwingCase |
| Delivery Time: | 1-2 weeks |
Do you have any questions or need further information? Then please give us a call.
Expert advice by phone +49 (0) 2151-393593 or by e-mail: info@carryboy.de
NOVISauto – SwingCase for the Jeep Gladiator 2020+
The ultra-practical box for tools, sporting goods and lots of small parts!
You can reach your tools and small parts by effortlessly detaching your SwingCase box from the holder with just one movement and swiveling it towards you. No slouching or "bunk climbing" is more needed! NOVISauto, the leader in selling popular Jeep Gladiator 2020+ accessories, builds these versatile storage boxes out of high-impact ABS hard plastic for your comfort - strong enough for a long Jeep Gladiator. SwingCase is "tough", it is waterproof, space-saving and therefore ideally suited for your gladiator. - Purchasing two SwingCases for both sides of your Jeep Gladiator platform wall is the best choice - space-saving, completely leak-proof and easy to handle!
Raise, lift off and take with you in a single operation, always ready to hand on any occasion: You take the SwingCase with you to your construction site or workplace - together with all the packed tools and assembly parts! SwingCase can be parked lying down or standing as usual. To save space, fix the SwingCase tool box to the side between the platform flap and the wheel housing on the Gladiator with all loading area lengths.
SwingCase for your new Jeep Gladiator Truck can be swung out , and thus fills the previously unused platform space between the wheel housing and tailgate - adapted for every pickup of all vehicle manufacturers, models and years of manufacture. The box can be locked with a rotary lock and permanently locked with a key. SwingCase is made of tough and durable ABS rigid plastic, strong enough to hold a weight of up to 34kg. The tool box is resistant to UV radiation and does not fade.
In addition, the tool box can be secured to the vehicle with a small padlock. This locking device is already included in many new swing case storage box series.
The tool box (tool box) and storage box is an essential Jeep Gladiator accessory for every tradesman or hobby - do-it-yourselfers.
The initial installation takes only about 15 minutes with 6 self-tapping sheet metal screws. Please note that the swing case cannot be installed in combination with an extendable loading floor. In the case of Jeep Gladiator pickups with an inserted load compartment tub, this must be cut out in two places to ensure that the swing case tool box is held securely. This is the only way to ensure that the bracket fits perfectly on the vehicle.
CARRYBOY - storage box / transport box for pickup - loading area of all brands Front opening CB-704 standard size
- Painted in silver metallic
- best quality by processing high-quality materials- dimensionally stable, unbreakable and resilient
- Lid lockable with spring lock, spring hinges, 2 keys
- Rain seal
- Chrome trim
- robust, dark and easy-care woven fabric inside, rubber mat on the floor
- Includes assembly set for attaching the storage box to the front tail lift
- assembly description
- Storage space approx. 0.2 - 0.23 cbm
NOTICE TO OUR CUSTOMERS:
Please note the dimensions (length x box width on the floor x box height x wheel arch height):
Article 704-C: 1304x350x495x282mm
Article 704-J: 1380x345x553x247mm
Other storage boxes are available:
- Article 735 with a locking lid, storage space approx. 0.43 cbm
- Article 737 with two closure lids, storage space approx. 0.43 cbm
- Item 774 for lateral attachment to the long side wall of the platform, approx. 0.22 cbm
Carryboy tool drawer model CB-800
Tool drawers and pull-out shelf with three-sided frame for all European midsize pickups.
(Ford Ranger, Nissan Navara, VW Amarok, Mercedes X, Mitsubishi L200, Renault Alaskan, Fiat Fullback, Toyota Hilux, Isuzu D-Max)
- Load capacity of the pulled-out drawers/loading floor up to 100 kg!
- Easy loading and unloading - you save time with it!
- Non-slip, durable, easy-to-clean loading surface
- best quality in processing and design
- dimensionally stable, unbreakable and resilient
- secure supply of spare parts
- easy assembly - fits in every pick-up, depending on the size
- Lockable drawers for extra security
- recommended size for installation with hardtop - p
Carryboy tool drawer model CB-800
Tool drawers and pull-out shelf with three-sided frame for all European midsize pickups.
(Ford Ranger, Nissan Navara, VW Amarok, Mercedes X, Mitsubishi L200, Renault Alaskan, Fiat Fullback, Toyota Hilux, Isuzu D-Max)
- Load capacity of the pulled-out drawers/loading floor up to 100 kg!
- Easy loading and unloading - you save time with it!
- Non-slip, durable, easy-to-clean loading surface
- best quality in processing and design
- dimensionally stable, unbreakable and resilient
- secure supply of spare parts
- easy assembly - fits in every pick-up, depending on the size
- Lockable drawers for extra security
- recommended size for installation with hardtop - p
Item No. CB-550x
CARRYBOY - roof basket made of stainless steel,
light and very stable aluminum with matching crossbars
Available in 4 different sizes and 2 colors (silver or black):
CB-550x-00 100*100cm
CB-550x-01 100*120cm
CB-550x-02 100*160cm
CB-550x-03 100*130cm
The luggage rack can be mounted on most cars, SUVs, VANs, pickups, trucks and Carryboy hardtops with suitable fasteners (self-assembly is possible). - No drilling required!
- Dimensionally stable, unbreakable and resilient
- easy to assemble - do it yourself -
- available in different dimensions
- secure supply of spare parts
The roof basket is supplied with crossbars and can be attached to the roof rails using the mounting kit supplied.
Appropriate fasteners (roof racks) are required for attachment to SUVs and pickup truck cabs.
If you have any questions, please contact us by telephone on 02151-393593 or by e-mail at info@carryboy.de
Please ask for delivery times for additional sizes.
Item No. CB-550x
CARRYBOY - roof basket made of stainless steel,
light and very stable aluminum with matching crossbars
Available in 4 different sizes and 2 colors (silver or black):
CB-550x-00 100*100cm
CB-550x-01 100*120cm
CB-550x-02 100*160cm
CB-550x-03 100*130cm
The luggage rack can be mounted on most cars, SUVs, VANs, pickups, trucks and Carryboy hardtops with suitable fasteners (self-assembly is possible). - No drilling required!
- Dimensionally stable, unbreakable and resilient
- easy to assemble - do it yourself -
- available in different dimensions
- secure supply of spare parts
The roof basket is supplied with crossbars and can be attached to the roof rails using the mounting kit supplied.
Appropriate fasteners (roof racks) are required for attachment to SUVs and pickup truck cabs.
If you have any questions, please contact us by telephone on 02151-393593 or by e-mail at info@carryboy.de
Please ask for delivery times for additional sizes.
CARRYBOY - pickup loading areas storage box / transport box / jumbo box - 737
side opening right / left for all pickups
Standard version:
- best quality by processing high-quality materials
- dimensionally stable, unbreakable and resilient
- Two lids can be closed on the side and in the middle with rotary locks
- 2 keyed alike are included
- Rain seal
- Paintwork in silver metallic
- Chrome trim
- Gas pressure shock absorber
- Interior lining with robust dark gray woven fabric, floor rubber mat
- Includes assembly set for attaching the storage box to the front tail lift
- assembly description
- Storage space approx. 0.45 - 0.48 cbm -
A notice:
Please note before placing your order: a mounted roll bar can be a hindrance when opening and closing the side storage box lid. - In this case, we would recommend storage box item 735 or 704 with a front-closing lid.
Other storage boxes are available:
- Item No. 735A with front-closing cover - 1290 x 550 x 555 x 285 mm, approx. 0.40 cbm
- Item No. 735B with front-closing cover - 1380 x 550 x 555 x 255 mm, approx. 0.43 cbm
- Item No. 704C with front-closing cover - 1304 x 350 x 495 x 282 mm, approx. 0.20 cbm
- Item No. 704J with front-closing lid - 1380 x 345 x 553 x 247 mm, approx. 0.24 cbm
CARRYBOY - XXL storage box / transport box Jumbo 735 - front opening
for sport and business - for all pickups
- Lid can be locked in the middle with a rotary lock - 2 keys are included
- Rain seal
- Paintwork in silver metallic / matt black / plain black
- Chrome trim
- Gas pressure shock absorber
- Interior lining using robust dark gray woven fabric, floor rubber mat
- Includes assembly set for attaching the storage box to the front tail lift
- assembly description
- Storage space approx. 0.40 - 0.45 cubic meters
- Dimensions according to the attached figure (L x W x H )
NOVISauto - automobile transport box for hunting weapons / tools
- Car transport box for hunting guns and hunting equipment
- Developed in cooperation with US law enforcement agencies - tailored for everyday use
- Fastening in the vehicle with a wire loop at a fixed point or permanent installation
- Robust workmanship and strength: 1.3mm thick steel - welded all around - matt black powder-coated
- Lid with seal and continuous hinge - powder-coated
- Lock with security key - if the key is lost, it can also be unlocked with a 10-key combination lock
- Lid attached with stable continuous hinge - dampers keep lid open
- Reinforcement embossing on the top - against force and pressure
- Upholstery of the interior with foam lining
- External dimension LWH: 89cm * 31cm * 13cm
- Inside dimension LWH: 87cm * 29cm * 13cm
Tablet security box for fixed or flexible installation in vehicles
- Unique tablet safe for installation in all vehicles with enough space
- Flexible installation : Reinforced steel sling, black coated, for attaching to a fixed point without screw connection or drilling - tensile load up to 1000kg - length 65cm.
- Fixed installation: Pre-drilled holes on the steel box for attaching to solid surfaces with screw connection
- Use : Electronic lock (e.g. tablet or mini-laptop), valuables lock for travelers and camping, fleet needs
- Robust workmanship and strength : Box welded from 1.3 mm steel plates - powder-coated
- Lid with seal : Continuous stable hinge - including removable hinge lock (connects full opening of the lid)
- Power supply & data exchange: passages on the cover for power and data cables
- Padding: Foam pads prevent damage and shifting of the contents
- Closure: 3-digit combination lock with twist lock - double steel bar inside
- External dimensions: 355mm length // 270mm width // 45mm height
- Internal dimensions: 330mm length // 205mm width // 25mm height
NOVISauto - LOCKBOX - AutoSafe for permanent installation
- Unique vehicle safe for installation in all vehicles with enough space
- Installation: Bolt to vehicle using SAE J429 Grade 8 Fastening Kit (One of the highest tensile strength alloy steels available)
- Use: Sales staff in the field and as camping equipment for caravans, residential structures or as a lockable security box for valuable tools
- Robust workmanship and strength: 1.3 mm thick steel - welded all around - matt black powder-coated
- Lid with seal and continuous hinge - powder-coated
- Standard lock: Exclusive lock for double-bit keys with 10 tumblers
- Alternative lock: 3 digit combination with rotary lock without key (see accessories)
- External dimensions: 159mm length // 400mm width // 257mm height
- Internal dimensions: 146mm length // 384mm width // 248mm height
NOVISauto - SUV trunk and pickup loading areas - safety drawers in different sizes
- SUV trunk safety drawer lockable (alternatively can also be installed in the pickup)
- Fixed installation in the vehicle
- Robust workmanship and strength: 1.3mm thick steel - welded all around - matt black powder-coated
- Heavy - duty drawer 130kg load - very smooth and easy movement thanks to sealed ball bearings
- Entire safe can be loaded with 130kg (stackable or double drawer system 250kg)
- Drawers can be stacked and used "multi-level" in the pickup or SUV trunk
- Drawer can be equipped with additional lashing points on the outside
- Lock with double bit - safety key and pressure cylinder
- Drawer is secured and snaps closed / locking by pressing the lock cylinder
- Foam padding or dividers available
- Portable slide-in cassette including a holder for permanent installation
- Install Bracket: Bolt to vehicle or other suitable surface with SAE J429 Grade 8 Fastening Kit (High Tensile Alloy Steel)
- Usage: Ideal for hunting or for locking valuables that you carry with you
- Robust workmanship and strength: 1.3mm thick steel - welded all around - matt black powder-coated
- Padded inside with foam
- Lid with seal and continuous hinge - including hand strap
- Standard lock: Exclusive lock for double-bit keys with 10 tumblers
- Alternative closure: Additional pressure cylinder lock for quick opening of the box
- External dimensions: 230mm length // 255mm width // 76mm height
- Inside dimensions: 155mm length // 240mm width // 50mm height
Laptop security box for fixed or flexible installation in vehicles
- Unique laptop safe for installation in all vehicles with enough space
- Fixed Installation : Bolt to vehicle using SAE J429 Grade 8 Fastening Kit (One of the highest tensile strength alloy steels available) - Standard
- Flexible installation : Reinforced steel sling, black coated, for attachment to a fixed point without screw connection or drilling - to be purchased as an extra
- Use : employees in the field and as camping equipment for caravans, residential structures or as a lockable security box for valuable tools / hunting equipment
- Robust workmanship and strength : Box welded all around from 1.3 mm steel plates - powder-coated matt black
- Lid with seal and continuous particularly stable hinge - 2.6mm material thickness
- Padding: up to 5 cm thick foam padding inside prevents damage and slipping of the contents
- Closure: Exclusive Pryguard lock with security key and weather seal.
- External dimensions: 465mm length // 135mm width // 362mm height
- Internal dimensions: 400mm length // 71mm width // 288mm height
Compact size security box for flexible installation in vehicles - ideal for wallets, travel documents, cash and as hunting equipment for the vehicle
- Unique laptop safe for installation in all vehicles with enough space
- Fixed Installation : Bolt to vehicle using SAE J429 Grade 8 Fastening Kit (One of the highest tensile strength alloy steels available)
- Flexible installation : Reinforced steel sling 66cm long, for attaching to a fixed point without screw connection or drilling - tensile strength tested up to 1000kg
- Use : employees in the field and as camping equipment for caravans, residential structures or as a lockable security box for valuable tools / hunting equipment
- Robust workmanship and strength : Box welded all around from 1.3 mm steel plates - powder-coated matt black
- Lid with seal and continuous particularly stable hinge - 2.6mm material thickness
- Padding: Foam padding to protect valuables from damage
- Lock: combination lock designed as a rotary lock (alternative: Pryguard cylinder lock with security key)
- External dimensions: 245mm length // 165mm width // 45mm height - weight 1.5kg
- Inside dimensions (with pad): 200mm length // 140mm width // 30mm height
NOVISauto - AutoSafe / lockable storage box for valuables for permanent installation in the trunk
- Unique trunk safe for installation in all vehicles with enough space
- Installation: Bolt to vehicle using SAE J429 Grade 8 Fastening Kit (One of the highest tensile strength alloy steels available)
- Use: Sales staff in the field and as camping equipment for caravans, residential structures or as a lockable safety box for valuable tools / hunting equipment
- Robust workmanship and strength: 1.3mm thick steel - welded all around - matt black powder-coated
- Lid with seal and continuous hinge - powder-coated
- Integrated storage compartment for small items 225mm length // 160mm width // 75mm height
- Closure: Pryguard pressure lock with security key and weather seal. The box can either be simply closed or firmly locked by pressing the lock. Then it can only be opened with a key.
- External dimensions: 245mm length // 860mm width // 290mm height
- Inside dimensions: 230mm length // 840mm width // 280mm height
NOVISauto - Pickup high-performance safety drawers for full-size pickups in different sizes
- Pickup high-performance drawer system, securely lockable and weatherproof
- Fixed installation in the vehicle
- Robust workmanship and strength: 1.3mm thick hardened steel - welded all around - matt black powder-coated
- Heavy - duty drawer 240kg load - very smooth and easy movement thanks to sealed ball bearings - each system has two of these drawers
- Punching in the drawers for the installation of dividers
- Entire safe can be loaded with 910kg
- Drawer can be equipped with additional lashing points on the outside
- Double-bit lock - security key and pressure cylinder (optional with additional combination lock)
- Drawer is secured and snaps closed / locking by pressing on the locking cylinder
Size S1: 1575mm * 1215mm * 255mm // 1465mm * 545mm * 160mm
Size S2: 1575mm * 1215mm * 355mm // 1465mm * 545mm * 260mm
Size M1: 1830mm * 1215mm * 225mm // 1720mm * 545mm * 160mm
Size M2: 1830mm * 1215mm * 355mm // 1720mm * 545mm * 260mm
Size L1: 2335mm * 1215mm * 225mm // 2230mm*545mm*160mm
Size L2: 2335mm * 1215mm * 355mm // 2230mm * 545mm * 260mm
CARRYBOY - storage box / transport box / tool box model 774
Storage box for convenient access to the loading area from the side - for sport and trade
suitable in the right size for all pickups:
for Volkswagen Amarok, Nissan Navara, Toyota Hilux,
Ford Ranger, Mazda BT50, Isuzu D-max, SsangYong Actyon,
Mitsubishi L200, Nissan Navara, etc.
Standard in the following version:
- Storage space approx. 0.25 cubic meters
- universally applicable thanks to generous dimensions
- Colour: powder coating matt black
- Safely lockable with spring lock with 2 keys
- Stainless steel hinge keeps lid open at 90°
- Inside with dark grey, robust woven fabric clothing
- Floor rubber mat
- Mounting set for attachment to the side tail lift
- assembly description
- Rain seal
When ordering, please indicate whether you want to install the storage box on the right or left in the direction of travel. The models are cut out according to the wheel housing, so this must also be specified.
Item No. CB-763-2400A
CARRYBOY - Roof Rack Tradesman
120 x 240 cm with attachment
The luggage rack can be mounted on the CSV Tradesman special body (suitable for models CSV, S560, SO, S8, S7, S6) with suitable fastening elements.
- Best quality in processing and design
- at an attractive price
- dimensionally stable, unbreakable and resilient
- easy to assemble
Also available in dimensions:
120 x 190 cm - Article no. CB-763-1900A for double cabin / extra cabin
The CARRYBOY roof rack in hammer finish is supplied with the appropriate holders for the desired hardtop / box body.
If your hardtop already has roof rails, we recommend sealing the existing holes in advance. The holders for the roof load system have different attachment points that have to be created on site on the hard top / box body.
CARRYBOY has been building accessories for small pickup trucks: hardtops, tonneau covers, roll bars, running boards, roof racks, bumpers since 1969. We build hundreds of hardtops and tonneau covers and much more every day, which are sold in more than 150 countries worldwide.
€385.00*
€750.00*
€2,625.00*
€2,525.00*
€399.99*
€750.00*
€950.00*
€875.00*
€1,138.00*
€393.88*
€374.90*
€1,526.00*
€510.00*
€569.68*
€174.00*
€898.00*
€6,677.00*
€675.00*
€1,300.00*
