Tool box 'SwingCase' SC204 - swing out - UCFR12
Ford Ranger 2012+
€385.00*
Immediately available
Delivery from 29 November 2024
Notes on purchase? Please enter here!
Product number: UC-SC204D
Product information "Tool box 'SwingCase' SC204 - swing out - UCFR12"
NOVISauto – SwingCase for the Ford Ranger 2012+ / 2019+ pickup
The ultra-practical box for tools, sporting goods and lots of small parts!
You can reach your tools and small parts by effortlessly detaching your SwingCase box from the holder with just one movement and swiveling it towards you. No slouching or "bunk climbing" is more needed! NOVISauto, the leader in selling popular Ford Ranger accessories, builds these multi-purpose storage boxes out of high-impact ABS hard plastic for your convenience - strong enough for a long Ranger pickup truck life. SwingCase is "tough", it is waterproof, space-saving and therefore ideally suited for your Ford Ranger in all loading lengths. - The purchase of two SwingCases for both sides of your Ford Ranger platform wall is the best choice - space-saving, absolutely tight and easy to handle!
Raise, lift off and take with you in a single operation, always ready to hand on any occasion: You take the SwingCase with you to your construction site or workplace - together with all the packed tools and assembly parts! SwingCase can be parked lying down or standing as usual. On the Ford Ranger 2012+, you can fix the SwingCase tool box on the side between the platform door and the wheel housing to save space.
SwingCase for your Ford Ranger truck on the passenger side can be swung out and thus fills the previously unused platform space between the wheel housing and tailgate - adapted for every pickup of all vehicle manufacturers, models and years of construction. The box can be locked with a rotary lock and permanently locked with a key. SwingCase is made of tough and durable ABS rigid plastic, strong enough to hold a weight of up to 34kg. The tool box is resistant to UV radiation and does not fade.
In addition, the tool box can be secured to the vehicle with a small padlock. This locking device is already included in many new swing case storage box series.
The tool box (tool box) and storage box is an essential Ford Ranger accessory for every tradesman or hobby - do-it-yourselfers. Suitable for all Ford Ranger models (XL, XLT, Limited, Wildtrak, Raptor).
The initial installation takes only about 15 minutes with 6 self-tapping sheet metal screws. Please note that the swing case cannot be installed in combination with an extendable loading floor. For Ford Ranger pickups with an inserted load compartment tub, this must be cut out in two places to ensure that the swing case tool box is held securely. This is the only way to ensure that the bracket fits perfectly on the vehicle.
Properties "Tool box 'SwingCase' SC204 - swing out - UCFR12"
| Construction year: | 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 |
|---|---|
| Make/Model: | Ford Ranger |
| ⓘ Accessories category: | storage & transport solutions |
| ⓘ Carrying capacity: | 34 kg |
| ⓘ Latch and lock: | Padlock, turn lock |
| ⓘ Materials: | ABS: composite material |
| ⓘ Own weight: | approx. 10 kg |
| ⓘ Place of attachment: | laterally, truck bed |
| ⓘ Shockproof: | yes |
| ⓘ Surface finish: | textured: glossy black |
| ⓘ approximate assembly time: | 15-30 min |
| ⓘ color: | black |
| ⓘ installation type: | no drilling, self-cutting screws |
| ⓘ lockable: | yes |
| ⓘ scratch resistant: | yes |
| ⓘ special feature: | portable, robust, swivels out, versatile use, weather proof |
| cabin length vehicle: | double cab, extra cab, single cab |
| Untertitel: | Ford Ranger 2012+ |
| Serie: | Modell SwingCase |
| Delivery Time: | 1-2 weeks |
Do you have any questions or need further information? Then please give us a call.
Expert advice by phone +49 (0) 2151-393593 or by e-mail: info@carryboy.de
Compare product
Image
Name
Tool box 'SwingCase' SC204 - swing out - UCFR12
CARRYBOY tool box model CB-704
Carryboy tool drawers with loading floor CB-800
Carryboy tool drawers with loading floor CB-800
CARRYBOY roof basket model CB-550x-00
CARRYBOY roof basket model CB-550-S-01
CARRYBOY tool box CB-735
CARRYBOY tool box model CB-737
NOVISauto lockable SUV trunk - security drawer
NOVISauto hunting safe and tool security box trunk
NOVISauto AutoSafe trunk vehicle safe for permanent installation
NOVISauto AutoSafe laptop security box for vehicles (max. 15 inch)
NOVISauto high-performance safety drawers for full-size pickups
NOVISauto AutoSafe cassette safe portable with holder for vehicles
NOVISauto AutoSafe vehicle safe for permanent installation in vehicles
NOVISauto AutoSafe portable tablet security box for vehicles
NOVISauto AutoSafe Valuables safe Compact size for wallets and travel documents
Carryboy transport box model CB-774
CARRYBOY roof rack CB-763-2400F
Link
Description
NOVISauto – SwingCase for the Ford Ranger 2012+ / 2019+ pickup
The ultra-practical box for tools, sporting goods and lots of small parts!
You can reach your tools and small parts by effortlessly detaching your SwingCase box from the holder with just one movement and swiveling it towards you. No slouching or "bunk climbing" is more needed! NOVISauto, the leader in selling popular Ford Ranger accessories, builds these multi-purpose storage boxes out of high-impact ABS hard plastic for your convenience - strong enough for a long Ranger pickup truck life. SwingCase is "tough", it is waterproof, space-saving and therefore ideally suited for your Ford Ranger in all loading lengths. - The purchase of two SwingCases for both sides of your Ford Ranger platform wall is the best choice - space-saving, absolutely tight and easy to handle!
Raise, lift off and take with you in a single operation, always ready to hand on any occasion: You take the SwingCase with you to your construction site or workplace - together with all the packed tools and assembly parts! SwingCase can be parked lying down or standing as usual. On the Ford Ranger 2012+, you can fix the SwingCase tool box on the side between the platform door and the wheel housing to save space.
SwingCase for your Ford Ranger truck on the passenger side can be swung out and thus fills the previously unused platform space between the wheel housing and tailgate - adapted for every pickup of all vehicle manufacturers, models and years of construction. The box can be locked with a rotary lock and permanently locked with a key. SwingCase is made of tough and durable ABS rigid plastic, strong enough to hold a weight of up to 34kg. The tool box is resistant to UV radiation and does not fade.
In addition, the tool box can be secured to the vehicle with a small padlock. This locking device is already included in many new swing case storage box series.
The tool box (tool box) and storage box is an essential Ford Ranger accessory for every tradesman or hobby - do-it-yourselfers. Suitable for all Ford Ranger models (XL, XLT, Limited, Wildtrak, Raptor).
The initial installation takes only about 15 minutes with 6 self-tapping sheet metal screws. Please note that the swing case cannot be installed in combination with an extendable loading floor. For Ford Ranger pickups with an inserted load compartment tub, this must be cut out in two places to ensure that the swing case tool box is held securely. This is the only way to ensure that the bracket fits perfectly on the vehicle.
CARRYBOY - storage box / transport box for pickup - loading area of all brands Front opening CB-704 standard size
Standard in the following version:
- dimensionally stable, unbreakable and resilient
- Lid lockable with spring lock, spring hinges, 2 keys
- Rain seal
- Chrome trim
- robust, dark and easy-care woven fabric inside, rubber mat on the floor
- Includes assembly set for attaching the storage box to the front tail lift
- assembly description
- Storage space approx. 0.2 - 0.23 cbm
NOTICE TO OUR CUSTOMERS:
Please note the dimensions (length x box width on the floor x box height x wheel arch height):
Article 704-C: 1304x350x495x282mm
Article 704-J: 1380x345x553x247mm
Other storage boxes are available:
- Painted in silver metallic
- best quality by processing high-quality materials- dimensionally stable, unbreakable and resilient
- Lid lockable with spring lock, spring hinges, 2 keys
- Rain seal
- Chrome trim
- robust, dark and easy-care woven fabric inside, rubber mat on the floor
- Includes assembly set for attaching the storage box to the front tail lift
- assembly description
- Storage space approx. 0.2 - 0.23 cbm
NOTICE TO OUR CUSTOMERS:
Please note the dimensions (length x box width on the floor x box height x wheel arch height):
Article 704-C: 1304x350x495x282mm
Article 704-J: 1380x345x553x247mm
Other storage boxes are available:
- Article 735 with a locking lid, storage space approx. 0.43 cbm
- Article 737 with two closure lids, storage space approx. 0.43 cbm
- Item 774 for lateral attachment to the long side wall of the platform, approx. 0.22 cbm
Carryboy tool drawer model CB-800
Tool drawers and pull-out shelf with three-sided frame for all European midsize pickups.
(Ford Ranger, Nissan Navara, VW Amarok, Mercedes X, Mitsubishi L200, Renault Alaskan, Fiat Fullback, Toyota Hilux, Isuzu D-Max)
- Load capacity of the pulled-out drawers/loading floor up to 100 kg!
- Easy loading and unloading - you save time with it!
- Non-slip, durable, easy-to-clean loading surface
- best quality in processing and design
- dimensionally stable, unbreakable and resilient
- secure supply of spare parts
- easy assembly - fits in every pick-up, depending on the size
- Lockable drawers for extra security
- recommended size for installation with hardtop - p
Carryboy tool drawer model CB-800
Tool drawers and pull-out shelf with three-sided frame for all European midsize pickups.
(Ford Ranger, Nissan Navara, VW Amarok, Mercedes X, Mitsubishi L200, Renault Alaskan, Fiat Fullback, Toyota Hilux, Isuzu D-Max)
- Load capacity of the pulled-out drawers/loading floor up to 100 kg!
- Easy loading and unloading - you save time with it!
- Non-slip, durable, easy-to-clean loading surface
- best quality in processing and design
- dimensionally stable, unbreakable and resilient
- secure supply of spare parts
- easy assembly - fits in every pick-up, depending on the size
- Lockable drawers for extra security
- recommended size for installation with hardtop - p
Item No. CB-550x
CARRYBOY - roof basket made of stainless steel,
light and very stable aluminum with matching crossbars
Available in 4 different sizes and 2 colors (silver or black):
CB-550x-00 100*100cm
CB-550x-01 100*120cm
CB-550x-02 100*160cm
CB-550x-03 100*130cm
The luggage rack can be mounted on most cars, SUVs, VANs, pickups, trucks and Carryboy hardtops with suitable fasteners (self-assembly is possible). - No drilling required!
- Dimensionally stable, unbreakable and resilient
- easy to assemble - do it yourself -
- available in different dimensions
- secure supply of spare parts
The roof basket is supplied with crossbars and can be attached to the roof rails using the mounting kit supplied.
Appropriate fasteners (roof racks) are required for attachment to SUVs and pickup truck cabs.
If you have any questions, please contact us by telephone on 02151-393593 or by e-mail at info@carryboy.de
Please ask for delivery times for additional sizes.
Item No. CB-550x
CARRYBOY - roof basket made of stainless steel,
light and very stable aluminum with matching crossbars
Available in 4 different sizes and 2 colors (silver or black):
CB-550x-00 100*100cm
CB-550x-01 100*120cm
CB-550x-02 100*160cm
CB-550x-03 100*130cm
The luggage rack can be mounted on most cars, SUVs, VANs, pickups, trucks and Carryboy hardtops with suitable fasteners (self-assembly is possible). - No drilling required!
- Dimensionally stable, unbreakable and resilient
- easy to assemble - do it yourself -
- available in different dimensions
- secure supply of spare parts
The roof basket is supplied with crossbars and can be attached to the roof rails using the mounting kit supplied.
Appropriate fasteners (roof racks) are required for attachment to SUVs and pickup truck cabs.
If you have any questions, please contact us by telephone on 02151-393593 or by e-mail at info@carryboy.de
Please ask for delivery times for additional sizes.
CARRYBOY - XXL storage box / transport box Jumbo 735 - front opening
for sport and business - for all pickups
- Lid can be locked in the middle with a rotary lock - 2 keys are included
- Rain seal
- Paintwork in silver metallic / matt black / plain black
- Chrome trim
- Gas pressure shock absorber
- Interior lining using robust dark gray woven fabric, floor rubber mat
- Includes assembly set for attaching the storage box to the front tail lift
- assembly description
- Storage space approx. 0.40 - 0.45 cubic meters
- Dimensions according to the attached figure (L x W x H )
CARRYBOY - pickup loading areas storage box / transport box / jumbo box - 737
side opening right / left for all pickups
Standard version:
- best quality by processing high-quality materials
- dimensionally stable, unbreakable and resilient
- Two lids can be closed on the side and in the middle with rotary locks
- 2 keyed alike are included
- Rain seal
- Paintwork in silver metallic
- Chrome trim
- Gas pressure shock absorber
- Interior lining with robust dark gray woven fabric, floor rubber mat
- Includes assembly set for attaching the storage box to the front tail lift
- assembly description
- Storage space approx. 0.45 - 0.48 cbm -
A notice:
Please note before placing your order: a mounted roll bar can be a hindrance when opening and closing the side storage box lid. - In this case, we would recommend storage box item 735 or 704 with a front-closing lid.
Other storage boxes are available:
- Item No. 735A with front-closing cover - 1290 x 550 x 555 x 285 mm, approx. 0.40 cbm
- Item No. 735B with front-closing cover - 1380 x 550 x 555 x 255 mm, approx. 0.43 cbm
- Item No. 704C with front-closing cover - 1304 x 350 x 495 x 282 mm, approx. 0.20 cbm
- Item No. 704J with front-closing lid - 1380 x 345 x 553 x 247 mm, approx. 0.24 cbm
NOVISauto - SUV trunk and pickup loading areas - safety drawers in different sizes
The compact SUV security drawers - permanently installed in the trunk - from NOVISauto offer convenient protection for your valuables in the vehicle. The thick-walled steel container is very reliable, convenient and securely lockable. Locking and unlocking is done with a double-bit safety key and pressure cylinder. You decide whether the drawer should be conveniently closed or securely locked by pressing the lock.
Benefit from a high payload and the option of stacking several drawers on top of each other to save space and connecting them on several levels. Both the drawer and the steel container around it can be loaded with 130kg each.
This safety box is available in different sizes for different requirements and vehicles. Double drawer version or stackable version available.
Drawer sizes L*W*H outside / inside (volume):
Drawer S: 76cm * 90cm * 20cm // 75cm * 73cm * 18cm (99L)
Drawer M: 92cm*76cm*30cm (210L)
Drawer L: 102cm*76cm*41cm (318L)
Drawer XL: 120cm*89cm*41cm (438L)
Standard equipment:
- SUV trunk safety drawer lockable (alternatively can also be installed in the pickup)
- Fixed installation in the vehicle
- Robust workmanship and strength: 1.3mm thick steel - welded all around - matt black powder-coated
- Heavy - duty drawer 130kg load - very smooth and easy movement thanks to sealed ball bearings
- Entire safe can be loaded with 130kg (stackable or double drawer system 250kg)
- Drawers can be stacked and used "multi-level" in the pickup or SUV trunk
- Drawer can be equipped with additional lashing points on the outside
- Lock with double bit - safety key and pressure cylinder
- Drawer is secured and snaps closed / locking by pressing the lock cylinder
- Foam padding or dividers available
NOVISauto - automobile transport box for hunting weapons / tools
When transporting rifles, firearms, but also hunting knives with a long blade, it must be ensured that these are not readily accessible. The requirement is met if the gun is in a locked container - for example in one of our car gun boxes or in a gun transport box. These reliably hide the hunting rifle from the eyes of third parties.
The compact automotive hunting gun safe from NOVISauto offers convenient protection for your valuables in the vehicle. The steel container with a thick wall - lockable with a key and combination lock - is to be attached to a fixed point in the trunk with a stainless steel wire loop.
This safety box is available in different sizes with different lids for different requirements.
Standard equipment:
- Car transport box for hunting guns and hunting equipment
- Developed in cooperation with US law enforcement agencies - tailored for everyday use
- Fastening in the vehicle with a wire loop at a fixed point or permanent installation
- Robust workmanship and strength: 1.3mm thick steel - welded all around - matt black powder-coated
- Lid with seal and continuous hinge - powder-coated
- Lock with security key - if the key is lost, it can also be unlocked with a 10-key combination lock
- Lid attached with stable continuous hinge - dampers keep lid open
- Reinforcement embossing on the top - against force and pressure
- Upholstery of the interior with foam lining
- External dimension LWH: 89cm * 31cm * 13cm
- Inside dimension LWH: 87cm * 29cm * 13cm
NOVISauto - AutoSafe / lockable storage box for valuables for permanent installation in the trunk
The trunk security box from NOVISauto offers convenient protection for your valuables in the vehicle. The steel container with a thick wall - lockable with a key or combination lock - is permanently attached to the vehicle and offers optimal protection for documents, tablets, laptops, cash and much more. The generous storage space including a shelf for small items offers space for all kinds of items.
Are you obliged to remove all valuables from the car? The car safe offers a more convenient storage option for all valuable goods in the vehicle. Also ideally suited as camping equipment, installation for caravans, mobile homes and pickups - residential structures.
The only condition for installation: There must be enough space for the safety box.
Standard equipment:
- Unique trunk safe for installation in all vehicles with enough space
- Installation: Bolt to vehicle using SAE J429 Grade 8 Fastening Kit (One of the highest tensile strength alloy steels available)
- Use: Sales staff in the field and as camping equipment for caravans, residential structures or as a lockable safety box for valuable tools / hunting equipment
- Robust workmanship and strength: 1.3mm thick steel - welded all around - matt black powder-coated
- Lid with seal and continuous hinge - powder-coated
- Integrated storage compartment for small items 225mm length // 160mm width // 75mm height
- Closure: Pryguard pressure lock with security key and weather seal. The box can either be simply closed or firmly locked by pressing the lock. Then it can only be opened with a key.
- External dimensions: 245mm length // 860mm width // 290mm height
- Inside dimensions: 230mm length // 840mm width // 280mm height
Laptop security box for fixed or flexible installation in vehicles
The laptop security box from NOVISauto offers convenient protection for your tablet or laptop in the vehicle. The steel container with a thick wall - lockable with a key or combination lock - is either firmly screwed into the vehicle or flexibly attached to a fixed point using a sheathed steel cable. The generous storage space of the box offers space for most laptops or tablets with a screen size of up to 15 inches. The inside of the safety box is lined with black foam to protect the electronics.
Are you obliged to remove all valuables from the car? The car safe offers a more convenient storage option for all valuable goods in the vehicle. Also ideally suited as camping equipment, installation for caravans, mobile homes and pickups - residential structures.
The only condition for installation: There must be enough space for the safety box. For safe, flexible installation, there should be an accessible fixing point for the steel sling.
Standard equipment:
- Unique laptop safe for installation in all vehicles with enough space
- Fixed Installation : Bolt to vehicle using SAE J429 Grade 8 Fastening Kit (One of the highest tensile strength alloy steels available) - Standard
- Flexible installation : Reinforced steel sling, black coated, for attachment to a fixed point without screw connection or drilling - to be purchased as an extra
- Use : employees in the field and as camping equipment for caravans, residential structures or as a lockable security box for valuable tools / hunting equipment
- Robust workmanship and strength : Box welded all around from 1.3 mm steel plates - powder-coated matt black
- Lid with seal and continuous particularly stable hinge - 2.6mm material thickness
- Padding: up to 5 cm thick foam padding inside prevents damage and slipping of the contents
- Closure: Exclusive Pryguard lock with security key and weather seal.
- External dimensions: 465mm length // 135mm width // 362mm height
- Internal dimensions: 400mm length // 71mm width // 288mm height
NOVISauto - Pickup high-performance safety drawers for full-size pickups in different sizes
The large heavy-duty security drawers - permanently installed in the pick-up cargo area - offer comfortable protection and at the same time organized storage space for your valuables in the vehicle. The thick-walled steel container is extremely durable and securely lockable. Locking and unlocking is done with a double-bit safety key and pressure cylinder. You decide whether the drawer should be conveniently closed or securely locked by pressing the lock. Alternatively, a combination lock for keyless access can be installed in the ergonomic handle.
Benefit from a high payload and the option of attaching lashing points to the top of the drawer. This offers more usable space and an extended payload of up to 900kg. The system has two drawers, each of which can be loaded with approx. 240kg and can be pulled out by up to 80%. Pre-punched holes make it easy to install partitions.
Standard equipment:
- Pickup high-performance drawer system, securely lockable and weatherproof
- Fixed installation in the vehicle
- Robust workmanship and strength: 1.3mm thick hardened steel - welded all around - matt black powder-coated
- Heavy - duty drawer 240kg load - very smooth and easy movement thanks to sealed ball bearings - each system has two of these drawers
- Punching in the drawers for the installation of dividers
- Entire safe can be loaded with 910kg
- Drawer can be equipped with additional lashing points on the outside
- Double-bit lock - security key and pressure cylinder (optional with additional combination lock)
- Drawer is secured and snaps closed / locking by pressing on the locking cylinder
Model selection - Length x width x height (external dimensions / internal dimensions per drawer):
Size S1: 1575mm * 1215mm * 255mm // 1465mm * 545mm * 160mm
Size S2: 1575mm * 1215mm * 355mm // 1465mm * 545mm * 260mm
Size M1: 1830mm * 1215mm * 225mm // 1720mm * 545mm * 160mm
Size M2: 1830mm * 1215mm * 355mm // 1720mm * 545mm * 260mm
Size L1: 2335mm * 1215mm * 225mm // 2230mm*545mm*160mm
Size L2: 2335mm * 1215mm * 355mm // 2230mm * 545mm * 260mm
Size S1: 1575mm * 1215mm * 255mm // 1465mm * 545mm * 160mm
Size S2: 1575mm * 1215mm * 355mm // 1465mm * 545mm * 260mm
Size M1: 1830mm * 1215mm * 225mm // 1720mm * 545mm * 160mm
Size M2: 1830mm * 1215mm * 355mm // 1720mm * 545mm * 260mm
Size L1: 2335mm * 1215mm * 225mm // 2230mm*545mm*160mm
Size L2: 2335mm * 1215mm * 355mm // 2230mm * 545mm * 260mm
The handy and compact solution for your valuables that you always want to carry with you. The valuables box from NOVISauto offers versatile protection for these items. Benefit from safe storage with maximum mobility at the same time.
The portable valuables cassette is supplied with a holder for the vehicle. Additional holders, for example for installation in the house, in the caravan or elsewhere, are available from us.
The safe cassette can be pushed into the holder and secured. To take the closed cassette with you, it can be removed from the holder again. The cassette can be stored elsewhere in another holder without opening it.
Ideally suited as hunting equipment for the vehicle. Are you obliged to remove all valuables from the car or to keep them safe? The car safe offers a more convenient storage option for all valuable goods in the vehicle. Also ideally suited as camping equipment, installation for caravans, campers and pickups - residential structures.
The only condition for installation: There must be enough space to hold the security cassette.
Standard equipment:
- Portable slide-in cassette including a holder for permanent installation
- Install Bracket: Bolt to vehicle or other suitable surface with SAE J429 Grade 8 Fastening Kit (High Tensile Alloy Steel)
- Usage: Ideal for hunting or for locking valuables that you carry with you
- Robust workmanship and strength: 1.3mm thick steel - welded all around - matt black powder-coated
- Padded inside with foam
- Lid with seal and continuous hinge - including hand strap
- Standard lock: Exclusive lock for double-bit keys with 10 tumblers
- Alternative closure: Additional pressure cylinder lock for quick opening of the box
- External dimensions: 230mm length // 255mm width // 76mm height
- Inside dimensions: 155mm length // 240mm width // 50mm height
NOVISauto - LOCKBOX - AutoSafe for permanent installation
The compact security box from NOVISauto offers convenient protection for your valuables in the vehicle. The steel container with a thick wall - lockable with a key or combination lock - is permanently attached to the vehicle and offers optimal protection for documents, tablets, laptops, cash and much more.
Are you obliged to remove all valuables from the car? The car safe offers a more convenient storage option for all valuable goods in the vehicle. Also ideally suited as camping equipment, installation for caravans, mobile homes and pickups - residential structures.
The only condition for installation: There must be enough space for the safety box.
Standard equipment:
- Unique vehicle safe for installation in all vehicles with enough space
- Installation: Bolt to vehicle using SAE J429 Grade 8 Fastening Kit (One of the highest tensile strength alloy steels available)
- Use: Sales staff in the field and as camping equipment for caravans, residential structures or as a lockable security box for valuable tools
- Robust workmanship and strength: 1.3 mm thick steel - welded all around - matt black powder-coated
- Lid with seal and continuous hinge - powder-coated
- Standard lock: Exclusive lock for double-bit keys with 10 tumblers
- Alternative lock: 3 digit combination with rotary lock without key (see accessories)
- External dimensions: 159mm length // 400mm width // 257mm height
- Internal dimensions: 146mm length // 384mm width // 248mm height
Tablet security box for fixed or flexible installation in vehicles
The tablet security box from NOVISauto offers convenient protection for your tablet or other larger valuables in the vehicle. The steel container with a thick wall - lockable with a number combination lock (3 combination) - is flexibly attached to a fixed point in the car using a coated steel cable. The generous storage space of the box offers space for most tablets with standard screen sizes. The inside of the safety box is lined with black foam to protect the electronics.
Are you obliged to remove all valuables from the car? The car safe offers a more convenient storage option for all valuable goods in the vehicle. Also ideally suited as camping equipment, installation for caravans, mobile homes and pickups - residential structures.
The only condition for installation: There must be enough space for the safety box. For safe, flexible installation, there should be an accessible fixing point for the steel sling. Due to the attachment with a steel cable and the low weight of approx. 3.5kg, this safe can also be carried between vehicle / office / home.
Standard equipment:
- Unique tablet safe for installation in all vehicles with enough space
- Flexible installation : Reinforced steel sling, black coated, for attaching to a fixed point without screw connection or drilling - tensile load up to 1000kg - length 65cm.
- Fixed installation: Pre-drilled holes on the steel box for attaching to solid surfaces with screw connection
- Use : Electronic lock (e.g. tablet or mini-laptop), valuables lock for travelers and camping, fleet needs
- Robust workmanship and strength : Box welded from 1.3 mm steel plates - powder-coated
- Lid with seal : Continuous stable hinge - including removable hinge lock (connects full opening of the lid)
- Power supply & data exchange: passages on the cover for power and data cables
- Padding: Foam pads prevent damage and shifting of the contents
- Closure: 3-digit combination lock with twist lock - double steel bar inside
- External dimensions: 355mm length // 270mm width // 45mm height
- Internal dimensions: 330mm length // 205mm width // 25mm height
Compact size security box for flexible installation in vehicles - ideal for wallets, travel documents, cash and as hunting equipment for the vehicle
The compact size security box from NOVISauto offers convenient protection for your cash, travel documents and check cards in the vehicle. The steel container with a thick wall - lockable with a key or combination lock - is flexibly attached to a fixed point using a coated steel cable. To protect the contents, the safety box is lined with foam on the inside.
Are you obliged to remove all valuables from the car? The car safe offers a more convenient storage option for all valuable goods in the vehicle. Also ideally suited as camping equipment, installation for caravans, campers and pickups - residential structures.
The only condition for installation: There must be enough space for the safety box. For safe, flexible installation, there should be an accessible fixing point for the steel sling.
By the way: This safety box can also be used as hunting equipment. Securely lock your handgun in compact size or special knife and thus ensure the prescribed safe transport in the vehicle.
Standard equipment:
- Unique laptop safe for installation in all vehicles with enough space
- Fixed Installation : Bolt to vehicle using SAE J429 Grade 8 Fastening Kit (One of the highest tensile strength alloy steels available)
- Flexible installation : Reinforced steel sling 66cm long, for attaching to a fixed point without screw connection or drilling - tensile strength tested up to 1000kg
- Use : employees in the field and as camping equipment for caravans, residential structures or as a lockable security box for valuable tools / hunting equipment
- Robust workmanship and strength : Box welded all around from 1.3 mm steel plates - powder-coated matt black
- Lid with seal and continuous particularly stable hinge - 2.6mm material thickness
- Padding: Foam padding to protect valuables from damage
- Lock: combination lock designed as a rotary lock (alternative: Pryguard cylinder lock with security key)
- External dimensions: 245mm length // 165mm width // 45mm height - weight 1.5kg
- Inside dimensions (with pad): 200mm length // 140mm width // 30mm height
CARRYBOY - storage box / transport box / tool box model 774
Storage box for convenient access to the loading area from the side - for sport and trade
suitable in the right size for all pickups:
for Volkswagen Amarok, Nissan Navara, Toyota Hilux,
Ford Ranger, Mazda BT50, Isuzu D-max, SsangYong Actyon,
Mitsubishi L200, Nissan Navara, etc.
Standard in the following version:
- Storage space approx. 0.25 cubic meters
- universally applicable thanks to generous dimensions
- Colour: powder coating matt black
- Safely lockable with spring lock with 2 keys
- Stainless steel hinge keeps lid open at 90°
- Inside with dark grey, robust woven fabric clothing
- Floor rubber mat
- Mounting set for attachment to the side tail lift
- assembly description
- Rain seal
When ordering, please indicate whether you want to install the storage box on the right or left in the direction of travel. The models are cut out according to the wheel housing, so this must also be specified.
Item No. CB-763-2400A
CARRYBOY - Roof Rack Tradesman
120 x 240 cm with attachment
The luggage rack can be mounted on the CSV Tradesman special body (suitable for models CSV, S560, SO, S8, S7, S6) with suitable fastening elements.
- Best quality in processing and design
- at an attractive price
- dimensionally stable, unbreakable and resilient
- easy to assemble
Also available in dimensions:
120 x 190 cm - Article no. CB-763-1900A for double cabin / extra cabin
The CARRYBOY roof rack in hammer finish is supplied with the appropriate holders for the desired hardtop / box body.
If your hardtop already has roof rails, we recommend sealing the existing holes in advance. The holders for the roof load system have different attachment points that have to be created on site on the hard top / box body.
CARRYBOY has been building accessories for small pickup trucks: hardtops, tonneau covers, roll bars, running boards, roof racks, bumpers since 1969. We build hundreds of hardtops and tonneau covers and much more every day, which are sold in more than 150 countries worldwide.
Price
€385.00*
€750.00*
€2,525.00*
€2,625.00*
€750.00*
€399.99*
€875.00*
€950.00*
€1,526.00*
€1,138.00*
€898.00*
€569.68*
€6,677.00*
€510.00*
€374.90*
€393.88*
€174.00*
€675.00*
€1,300.00*
Construction year
Make/Model
ⓘ Accessories category
-
-
-
-
-
-
-
-
-
ⓘ Latch and lock
-
-
-
-
-
-
-
-
-
-
-
-
-
-
ⓘ Materials
-
-
-
-
-
-
-
-
-
ⓘ Own weight
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
ⓘ Shockproof
-
-
-
-
-
-
-
-
-
-
-
-
ⓘ Surface finish
-
-
-
-
-
-
-
-
-
-
-
-
ⓘ approximate assembly time
-
-
-
-
-
-
-
-
-
ⓘ color
-
-
-
-
-
-
-
-
-
-
-
-
ⓘ installation type
-
-
-
-
-
-
-
-
-
ⓘ lockable
-
-
-
-
-
-
-
-
-
-
-
-
ⓘ scratch resistant
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
ⓘ special feature
-
-
-
-
-
-
-
-
-
cabin length vehicle
-
-
-
-
-
-
-
-
-
Length of truck bed
-
-
-
-
-
-
-
-
-
-
-
-
-
ⓘ Height above edge of cargo area
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
ⓘ Hinges
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
ⓘ Loading area fully accessible
-
-
-
-
-
-
-
-
-
-
-
-
-
ⓘ particularly suitable for
-
-
-
-
-
-
-
-
-
-
-
ⓘ storage space
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
ⓘ particularly UV-resistant
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Assembly
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
ⓘ Product suitable in combination with
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
ⓘ Supplied (separate) accessories
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Dimensions
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Weiteres Ford Zubehör
Only 4 available
Boot lid protection strip Ford Ranger - BWFRD12
Ford Ranger 2012+
NOVISauto - edge protection for the pickup tailgate of your Ford Ranger from year of construction 2012+ Effectively and inexpensively protect the scratch-prone upper edge of the tailgate of your 2010-2020 Ford Ranger! The NOVISAuto protective strip for the Ford Ranger tailgate offers long-lasting and very effective protection against scratches in the paintwork. Ideally suited if you already have a built-in loading space liner without edge protection or if the loading space is protected with a coating - because the edges of the loading area are still unprotected with both systems! The protective cap / rubbing strip for the Ford Ranger tailgate was developed for lasting protection against scratches, dents and dents. A close fit with smooth machined edges and durable plastic material make our Ford Ranger Edge Cover Moldings an excellent addition to your vehicle. The thickness of the edge protection is 3mm, up to 4mm in particularly stressed areas. The NOVISAuto Bushwacker protective strip is made of high-quality DURA-FLEX 2000 plastic. This plastic is very durable, impact and scratch-resistant and designed for all seasons. Harmful sun rays cannot harm your plastic edge protection, because the material does not fade. The surface is visually and haptically appealing with a slightly rough black surface.
Product number: BW-28512
€132.99*
Immediately available
Delivery from 29 November 2024
Care spray for tarpaulins - cargo area covers EX-TONNO TONIC
for all truck cargo area covers and tarpaulins
NOVISauto care spray "TONNO TONIC" for all luggage compartment covers and tarpaulins made of ABS hard plastic and vinyl. Tonno Tonic cares, cleans and gives your cover a fresh shine in a single step - it effectively protects against UV light. Tonno Tonic has been thoroughly tested and is 100% suitable for protecting all ABS hard plastic and vinyl covers. Remember to take care of your cover regularly! - she will thank you with a good, fresh appearance and a long life! Tonno Tonic protects against harsh weather, cold winter and hot summer days. For care, simply spray Tonno Tonic on the previously cleaned tarpaulin. Wipe the surface dry with a clean cloth. Feel free to use Tonno Tonic to clean your tires - please wait 5 minutes after spraying before you can wipe the tire surface dry. Your rims will not be damaged. Tonno Tonic is available in a 0.47 liter spray bottle or as a 6-pack for dealers.
Product number: EX-TONNO TONIC
€35.00*
Immediately available
Delivery from 29 November 2024
Carryboy CB-111-FR tailgate damper gas spring €165.01*
for Ford Ranger all lengths 2012+
More properties: Dämpfer: federt Auf- & hilft beim Zumachen
Equip your Ford Ranger extra cab (Spacecab), double cab or single cab (Singlecab) built in 2023+ with a CARRYBOY tailgate damper 111. Increase the usability of your pickup and increase comfort. With accessories from the Comfort & Ease of Use section. Ford Ranger accessories seamlessly adapt to your vehicle. Opt for a bespoke accessory that comes with a mounting kit and installation instructions. If you have any questions, you can contact us at any time. If you wish, we would be happy to professionally assemble the accessories for you. Take advantage of our strong CARRYBOY accessory model tailgate damper 111 from Carryboy for your Ford Ranger extra cab (Spacecab), double cab or single cab (single cab) built in 2023+. Your advantages summarized: for Ford Ranger extra cab/1.5 cab (Kingcab), double cab (Doublecab), single cab (Singlecab) year of construction from 2023+ CARRYBOY accessories manufactured by CARRYBOY Accessories designed for comfort & ease of use - black Mounting type: screws approximate assembly time: 10 min special feature: easy opening and high compatibility particularly suitable for: convenient use and simple application Attaches to tailgate and side Storage space approx. 0.5 m³ Our recommendation for your Ford Ranger Extra Cab (Spacecab), Double Cab, Single Cab (Singlecab) Our first-class CARRYBOY accessory tailgate damper 111 from Carryboy for your Ford Ranger 2023+ extra cabin (Spacecab), double cabin or single cabin (Singlecab) is suitable for every purpose! It is an ideal accessory for convenient use and easy application. Use the accessories for leisure and business! Best service - before and after the purchase You can rely on our service! Uncertainties or questions? Ask us by email or phone! We would be happy to advise you in detail and in a customer-oriented manner . Due to our daily work in the office AND warehouse, as well as our extensive wealth of experience thanks to 16 years of practical work, we are technically adept, technically competent and have practical experience. Are you concerned about sustainability or long-term use? No problem! The use of high-quality materials, raw materials and parts enables our accessories to have a long service life and useful life. Sustainability is achieved through lifelong use and thus the saving of resources for new production. More comfort and increased user-friendliness with CARRYBOY tailgate dampers 111 The accessory Carryboy tailgate damper 111 is delivered in black . The Carryboy CB-111-FT tailgate damper gas pressure spring is installed on the tailgate, on the side . The approximate installation time is 10 minutes on your Ford Ranger. Mounting with screws allows for better stability of the accessories. The accessory is particularly secure thanks to screws. The special features of the accessories are: easy opening and high compatibility . Convenient to use and easy to use : in summary, the CARRYBOY tailgate damper 111 accessory for your Ford Ranger extra cab/1.5 cab (Kingcab), double cab (Doublecab) or single cab (Singlecab) from 2023+ is particularly suitable for this.
Product number: CB-119-FR
Variants from €106.99*
Immediately available
Delivery from 29 November 2024
Carryboy CB-111-FT tailgate damper gas spring €165.01*
for Ford Ranger all lengths 2012+
More properties: Dämpfer: federt Auf- & hilft beim Zumachen
CARRYBOY tailgate damper CB-111 on Stabilus - shock absorber base for Ford Ranger 2012+ for Ford Ranger 2012+ Double Cab / Extra Cab / Single Cab Simple installation on existing screw connections and threads two stable, matt black coated brackets for chassis and tailgate durable Stabilus gas pressure damper The tailgate slowly slides open into the end position Tailgate damper prevents the tailgate from accidentally "falling down". suitable with all accessories, as it is installed directly in the cavity between the side wall and the tailgate
Product number: CB-119-FT
Variants from €106.99*
Immediately available
Delivery from 29 November 2024
Only 1 available
CARRYBOY cross member model 558 €610.00*
for all Carryboy hardtops
CARRYBOY - aluminum cross member elliptical shape for mounting on all CARRYBOY hardtops with roof rails Length of the crossbars 125 cm Sturdy aluminum with a satin finish Including rubber insert Including attachments (matching feet) for the hardtop roof rails Can be attached to the hardtop without drilling When ordering, please name the built-in hardtop / cargo area roller blind - model The crossbars are ideal for attaching the CARRYBOY roof baskets - available in 5 different sizes.
Product number: GR-59350XXT
Variants from €595.00*
Immediately available
Delivery from 29 November 2024
Show more details
Only 3 available
CARRYBOY cross member model 558
for all Carryboy hardtops
CARRYBOY - aluminum cross member elliptical shape for mounting on all CARRYBOY hardtops with roof rails Length of the crossbars 125 cm Sturdy aluminum with a satin finish Including rubber insert Including attachments (matching feet) for the hardtop roof rails Can be attached to the hardtop without drilling When ordering, please name the built-in hardtop / cargo area roller blind - model The crossbars are ideal for attaching the CARRYBOY roof baskets - available in 5 different sizes.
Product number: CB-558-00
€275.00*
Immediately available
Delivery from 29 November 2024
CARRYBOY loading floor extension full bed 350kg double cabin Ranger / Navara NP300
for all pickups
Dimensions: M (VB) - double cab Ranger 12-19 / Navara
Carryboy - full bed pull-out shelf - Pull-out shelf cut out of aluminum checker plate according to the contour of the wheel housing This extendable loading floor is also available in combination with a drawer system in different sizes (CB-800). - Load capacity up to 350 kg! - Easy loading and unloading - you save time with it! - Non-slip, hard-wearing, easy-to-clean loading surface made of aluminum checker plate - best quality in processing and design - dimensionally stable, unbreakable and loadable up to approx. 350 kg - secure supply of spare parts - Simple assembly according to video and written assembly instructions - Convenient securing of the load with the integrated lashing eyes - The ball-bearing loading floor is unlocked with the handle - The loading area is almost completely filled - Wheel housings are cut out A notice: these products are so-called selection products, which are individually manufactured to your order. This pull-out drawer is divided into S / M / L categories in terms of dimensions. Due to the rectangular shape, the loading floor fits on different vehicles. As an option, the loading floor can be fully adapted to the vehicle. The area of the accessory drawer is expanded to include the area behind the wheel arches. When ordering, please indicate the vehicle in question so that we can assign you the right vehicle. You can also choose between the pull-out loading floor in aluminum or covered with an anti-slip rubber coating.
Product number: CB-788-00-A-M
€1,800.01*
Immediately available
Delivery from 29 November 2024
CARRYBOY loading floor extension rectangular 350kg double cab D-MAX / Hilux / L200 €1,700.00*
for all EU pickups and loading area lengths (selectable)
Dimensions: S (UNIV.) - Hilux / D-Max / L200 / Fullback double cab
Carryboy - Slide Floor Universal - Pull-out shelf made of aluminum checker plate with a three-sided frame for all mid-size pickup trucks This extendable loading floor is also available in combination with a drawer system in different sizes (CB-800). - Load capacity up to 350 kg! - Easy loading and unloading - you save time with it! - Non-slip, hard-wearing, easy-to-clean loading surface made of aluminum checker plate - best quality in processing and design - dimensionally stable, unbreakable and loadable up to approx. 350 kg - secure supply of spare parts - Simple assembly according to video and written assembly instructions - Convenient securing of the load with the integrated lashing eyes - The ball-bearing loading floor is unlocked with the handle. A notice: these products are so-called selection products, which are individually manufactured to your order. This pull-out drawer is divided into S / M / L categories in terms of dimensions. Due to the rectangular shape, the loading floor fits on different vehicles. As an option, the loading floor can be fully adapted to the vehicle. The area of the accessory drawer is expanded to include the area behind the wheel arches. The universal loading floor CB-778 is available as an accessory for these pickup vehicles with the following dimensions: Size S (1020*1380*208) - Toyota Hilux Revo, Isuzu Dmax, Mitsubishi L200, Fiat Fullback Size M (1080*1380*208) - Ford Ranger, Nissan Navara NP300, Renault Alaskan Size L (1200*1440*208) - VW Amarok Size XL - with the appropriate width, but 1700 mm length for single and extracab pickups. When ordering, please indicate the vehicle in question so that we can assign you the right vehicle. You can also choose between the pull-out loading floor in aluminum or covered with an anti-slip rubber coating.
Product number: CB-778-00-A-S
Variants from €1,675.00*
Immediately available
Delivery from 29 November 2024
Only 1 available
Tip
CARRYBOY loading floor pull-out rectangular 350kg
for all EU pickups and loading area lengths (selectable)
Equip your Ford Ranger 2023+, Isuzu D-Max 2021+ with a CARRYBOY 778 loading floor extension. Expand and protect your storage space for everyday use. With accessories from the stowage & transport solutions section. Our accessories for your Ford Ranger 2023+, Isuzu D-Max 2021+ Double cab (Doublecab) built up to 2022 adapts seamlessly to your vehicle. Mounting kit and installation instructions are included. If necessary, you can watch our assembly videos on Youtube. If you have any questions, you can contact us at any time. Have your accessories assembled by our technically experienced, professionally competent and practically experienced employees on request! Benefit from our strong Carryboy accessory model 778 loading floor extension for your Ford Ranger 2023+, Isuzu D-Max 2021+ double cabin. More space, more fun - loading floor pull-out 778 from CARRYBOY as ideal storage and transport solutions The accessory model "Load floor pull-out 778" from CARRYBOY for your Ford Ranger 2023+, Isuzu D-Max 2021+ double cab is particularly UV-resistant . This increases the life of the accessory - it is protected from the sun and fading. The durable accessory loading floor pull-out 778 from CARRYBOY is particularly scratch-resistant . A long use in top condition without major signs of use is made possible. Load your truck from the sides or the back. Our accessories do not block your access . The CARRYBOY 778 loading floor extension accessory is made of steel and aluminum for your Ford Ranger 2023+, Isuzu D-Max 2021+ double cab. Low weight, robustness, stability and durability are the special properties of aluminium . Among other things, the accessory uses loading floor extension 778 for your Ford Ranger 2023+, Isuzu D-Max 2021+ aluminum for this reason. The advantages of steel cannot be denied. Steel is strong, resilient and stable. This means that your accessories are well prepared for loads. Accessories Carryboy loading floor pull-out 778 is impact-resistant and thus offers effective protection against sudden loads. The loading floor pull-out accessory 778 can withstand 350 kg . The CARRYBOY loading floor pull-out rectangular 350kg is installed on the flatbed . You will need approximately 1-3 hours to fit the cover on your Ford Ranger 2023+, Isuzu D-Max 2021+. The assembly takes place without drilling. The loading floor pull-out is attached to the platform edge to ensure stability. The special features of the accessories are: easy to open, robust, versatile, extendable and easy to clean . In summary, the CARRYBOY 778 loading floor extension accessory is for your Ford Ranger 2023+, Isuzu D-Max 2021+ double cab particularly suitable for: trade, daily use, comfortable use, extreme stress, frequent use, simple use and professionals . The entire equipment at a glance: for Ford Ranger 2023+, Isuzu D-Max 2021+Double Cab CARRYBOY accessories manufactured by CARRYBOY Accessories suitable for storage & transport solutions particularly UV-resistant scratch resistant Loading area fully accessible Type of installation: without drilling Material: steel and aluminum approximate assembly time: 1-3 h particularly shockproof: yes Load capacity: 350 kg special feature: easy to open, robust, versatile, extendable and easy to clean particularly suitable for: trade, daily use, comfortable use, extreme stress, frequent use, simple use and professionals Our recommendation for your pickup truck Our first-class CARRYBOY accessory loading floor pull-out 778 from Carryboy for your Ford Ranger 2023+, Isuzu D-Max 2021+ Double cab is suitable for every purpose! It is an ideal accessory for commercial, daily use, convenient use, heavy duty use, frequent use, easy use and professional. Use the accessories for leisure and business! Our service to you - before and after the purchase Rely on our service! uncertainties? Questions? Contact us by email or phone! We would be happy to advise you in detail and in a customer-oriented manner . Due to our daily work in the office AND warehouse, as well as our extensive wealth of experience thanks to 16 years of practical work, we are technically adept, technically competent and have practical experience. Is long-term use and thus sustainability important to you? No problem! A long service life and useful life of our accessories is made possible by the use of high-quality parts, raw materials and materials. Sustainability is achieved through lifelong use and thus the saving of resources for new production.
Product number: CB-778-00-ND
€1,900.00*
Immediately available
Delivery from 29 November 2024
Show more details
Only 1 available
CARRYBOY loading floor pull-out rectangular 350kg
for all EU pickups and loading area lengths (selectable)
Carryboy - Slide Floor Universal - Pull-out shelf made of aluminum checker plate with a three-sided frame for all mid-size pickup trucks This extendable loading floor is also available in combination with a drawer system in different sizes (CB-800). - Load capacity up to 350 kg! - Easy loading and unloading - you save time with it! - Non-slip, hard-wearing, easy-to-clean loading surface made of aluminum checker plate - best quality in processing and design - dimensionally stable, unbreakable and loadable up to approx. 350 kg - secure supply of spare parts - Simple assembly according to video and written assembly instructions - Convenient securing of the load with the integrated lashing eyes - The ball-bearing loading floor is unlocked with the handle. A notice: these products are so-called selection products, which are individually manufactured to your order. This pull-out drawer is divided into S / M / L categories in terms of dimensions. Due to the rectangular shape, the loading floor fits on different vehicles. As an option, the loading floor can be fully adapted to the vehicle. The area of the accessory drawer is expanded to include the area behind the wheel arches. The universal loading floor CB-778 is available as an accessory for these pickup vehicles with the following dimensions: Size S (1020*1380*208) - Toyota Hilux Revo, Isuzu Dmax, Mitsubishi L200, Fiat Fullback Size M (1080*1380*208) - Ford Ranger, Nissan Navara NP300, Renault Alaskan Size L (1200*1440*208) - VW Amarok Size XL - with the appropriate width, but 1700 mm length for single and extracab pickups. When ordering, please indicate the vehicle in question so that we can assign you the right vehicle. You can also choose between the pull-out loading floor in aluminum or covered with an anti-slip rubber coating.
Product number: CB-778-01
€1,700.00*
Immediately available
Delivery from 29 November 2024
CARRYBOY luggage net model CB-999
Supplement to Carryboy roof baskets
Dimensions: 90x90 cm
Item No. CB-999 CARRYBOY - Luggage net - Article 999 the right addition to Carryboy roof baskets - in sizes 90 x 90 cm / 90 x 110 cm / 90 x 150 cm - UV and weather resistant - with hooks for quick, uncomplicated attachment - with carry bag - Best material and processing quality - unbreakable and resilient CARRYBOY has been building accessories for small pickup trucks: hardtops, tonneau covers, roll bars, running boards, roof racks, bumpers since 1969. We build hundreds of hardtops and tonneau covers and much more every day, which are sold in more than 150 countries worldwide. If you have any questions, please contact us by telephone on 02151-393593 or by e-mail at info@carryboy.de Please ask for the exact delivery time
Product number: CB-999.3
€55.00*
Immediately available
Delivery from 29 November 2024
Only 1 available
CARRYBOY roof basket model CB-550x-00
made of aluminium
Item No. CB-550x CARRYBOY - roof basket made of stainless steel, light and very stable aluminum with matching crossbars Available in 4 different sizes and 2 colors (silver or black): CB-550x-00 100*100cm CB-550x-01 100*120cm CB-550x-02 100*160cm CB-550x-03 100*130cm The luggage rack can be mounted on most cars, SUVs, VANs, pickups, trucks and Carryboy hardtops with suitable fasteners (self-assembly is possible). - No drilling required! - Dimensionally stable, unbreakable and resilient - easy to assemble - do it yourself - - available in different dimensions - secure supply of spare parts The roof basket is supplied with crossbars and can be attached to the roof rails using the mounting kit supplied. Appropriate fasteners (roof racks) are required for attachment to SUVs and pickup truck cabs. If you have any questions, please contact us by telephone on 02151-393593 or by e-mail at info@carryboy.de Please ask for delivery times for additional sizes.
Product number: GR-5934048T
€750.00*
Immediately available
Delivery from 29 November 2024
CARRYBOY roof rack CB-763-2400F
for all 1.5 cab/single cab hardtops and superstructures
Item No. CB-763-2400A CARRYBOY - Roof Rack Tradesman 120 x 240 cm with attachment The luggage rack can be mounted on the CSV Tradesman special body (suitable for models CSV, S560, SO, S8, S7, S6) with suitable fastening elements. - Best quality in processing and design - at an attractive price - dimensionally stable, unbreakable and resilient - easy to assemble Also available in dimensions: 120 x 190 cm - Article no. CB-763-1900A for double cabin / extra cabin The CARRYBOY roof rack in hammer finish is supplied with the appropriate holders for the desired hardtop / box body. If your hardtop already has roof rails, we recommend sealing the existing holes in advance. The holders for the roof load system have different attachment points that have to be created on site on the hard top / box body. CARRYBOY has been building accessories for small pickup trucks: hardtops, tonneau covers, roll bars, running boards, roof racks, bumpers since 1969. We build hundreds of hardtops and tonneau covers and much more every day, which are sold in more than 150 countries worldwide.
Product number: CB-763-2400F
€1,300.00*
Immediately available
Delivery from 29 November 2024
CARRYBOY roof rack model CB-763-1900A
for all double cab hardtops and superstructures
Item No. CB-763-1900A CARRYBOY - Roof RacksTradesman 120 x190 cm with attachment The luggage carrier can be attached to the special CSV Tradesman (or suitable for models CSV, S560, SO, S8, S7, S6). - Best quality in processing and design - at an attractive price - dimensionally stable, unbreakable and resilient - easy to assemble Also available in dimensions: 120 x 240 cm - Item No. CB-763-2400F for Single Cab The roof basket is supplied with crossbars and can be attached to the roof rails of a CARRYBOY hardtop using the assembly kit supplied, but also to rails from other manufacturers (see explanations below). Suitable fastening elements are required for attachment to SUVs, to the cabs of pickup trucks, which can be ordered separately. CARRYBOY has been building accessories for small pickup trucks: hardtops, tonneau covers, roll bars, running boards, roof racks, bumpers since 1969. We build hundreds of hardtops and tonneau covers and much more every day, which are sold in more than 150 countries worldwide.
Product number: CB-763-1900A
€1,300.00*
Immediately available
Delivery from 29 November 2024
Only 1 available
Carryboy roof tent for 2-3 people Series 1
Roof tent 2-3 people for mid-size / pickup / SUV
CARRYBOY ROOF TENT CB-102-2P for all common pickups, SUVs and mid-size cars: Material: Materials from the outside: Oxford polyester with silver coating and UPF50+ (absorbs more than 98% of UV rays) Material from inside: 190 g/sqm rip-stop polyester with PU 2000mm Bottom material: 210 Denier Oxford Nylon with PU 2000mm Interior: rust-free aluminum struts ensure structure and comfortable lying 6 cm foam mattress can be removed and cleaned 6 large windows with insect screens 2 shoe bags at the entrance - the dirt stays outside Comfort: Self-deploying within a few seconds using gas pressure springs spacious room for 2-3 people Protected against wind, weather and rain Foam mattress 6cm 2 extra shoe boxes Entry ladder can be extended by a maximum of 2m, fixed to the tent and foldable Fly screens in front of the windows Reliable UV protection tent size: Unfolded & erected: 1,340 x 2,165 x 1,343mm folded: 1,340 x 2,165 x 300mm Weight: 56 kg (together with ladder)
Product number: CB-102-2P
€1,760.00*
Immediately available
Delivery from 29 November 2024
Carryboy tailgate damper combination system CB-105-FTW gas spring + cable
for Ford Ranger 2012+ all lengths
CARRYBOY tailgate damper combination system CB-105-FTW for Ford Ranger 2012+ all bed lengths The pickup tailgate damper system CB-105 combines the advantages of the tailgate cable "Slingup" CB-777 with the advantages of the tailgate gas spring CB-111. Tailgate damper with two stable brackets is anchored to existing screw points, so no drilling is necessary Robust Stabilus gas pressure spring brakes the movement of the tailgate when opening and reliably prevents the pick-up platform flap from "falling down". The pick-up tailgate slowly slides open when opening and moves gently into the end position The tailgate sling-up cable saves the energy when the tailgate is opened and releases it again in a controlled manner when it is closed - noticeable support even when closing the tailgate The tailgate damping can be infinitely adjusted with an open-end wrench For Ford Ranger 2019+ please note: The tailgate cable CB-777 Slingup is attached to the car with a specially made bracket. The holder is no longer suitable for original Ford Ranger load compartment tubs with a "large bulge" behind the tailgate on the sides. The system can be used without restrictions on vehicles without a tub or on Ford Ranger pickups with an original cargo area tub built between 2012 and 2018. It can also be used on vehicles with a spray coating, so-called "elephant skin". If you have any questions or are unclear, we can immediately make a recommendation with a photo of the loading area with the tailgate open. For vehicles with tubs from 2019, we only recommend using the CB-111-FT gas spring system (springing when opening the tailgate).
Product number: CB-105-FTW
€169.50*
Immediately available
Delivery from 29 November 2024
CARRYBOY tool box CB-735
for all pickup trucks - front opening - silver metallic
CARRYBOY - XXL storage box / transport box Jumbo 735 - front opening for sport and business - for all pickups - Lid can be locked in the middle with a rotary lock - 2 keys are included - Rain seal - Paintwork in silver metallic / matt black / plain black - Chrome trim - Gas pressure shock absorber - Interior lining using robust dark gray woven fabric, floor rubber mat - Includes assembly set for attaching the storage box to the front tail lift - assembly description - Storage space approx. 0.40 - 0.45 cubic meters - Dimensions according to the attached figure (L x W x H )
Product number: CB-735-B
€875.00*
Immediately available
Delivery from 29 November 2024
CARRYBOY tool box model CB-737
for all pickup models - can be opened on the side with 2 covers - silver metallic
CARRYBOY - pickup loading areas storage box / transport box / jumbo box - 737 side opening right / left for all pickups Standard version: - best quality by processing high-quality materials - dimensionally stable, unbreakable and resilient - Two lids can be closed on the side and in the middle with rotary locks - 2 keyed alike are included - Rain seal - Paintwork in silver metallic - Chrome trim - Gas pressure shock absorber - Interior lining with robust dark gray woven fabric, floor rubber mat - Includes assembly set for attaching the storage box to the front tail lift - assembly description - Storage space approx. 0.45 - 0.48 cbm - A notice: Please note before placing your order: a mounted roll bar can be a hindrance when opening and closing the side storage box lid. - In this case, we would recommend storage box item 735 or 704 with a front-closing lid. Other storage boxes are available: - Item No. 735A with front-closing cover - 1290 x 550 x 555 x 285 mm, approx. 0.40 cbm - Item No. 735B with front-closing cover - 1380 x 550 x 555 x 255 mm, approx. 0.43 cbm - Item No. 704C with front-closing cover - 1304 x 350 x 495 x 282 mm, approx. 0.20 cbm - Item No. 704J with front-closing lid - 1380 x 345 x 553 x 247 mm, approx. 0.24 cbm
Product number: CB-737-A
€950.00*
Immediately available
Delivery from 29 November 2024
Carryboy tool drawers with loading floor CB-800
for double cab pickups
Dimensions: S - Small drawer | Variant - base: Aluminum checker plate
Carryboy tool drawer model CB-800 Tool drawers and pull-out shelf with three-sided frame for all European midsize pickups. (Ford Ranger, Nissan Navara, VW Amarok, Mercedes X, Mitsubishi L200, Renault Alaskan, Fiat Fullback, Toyota Hilux, Isuzu D-Max) - Load capacity of the pulled-out drawers/loading floor up to 100 kg! - Easy loading and unloading - you save time with it! - Non-slip, durable, easy-to-clean loading surface - best quality in processing and design - dimensionally stable, unbreakable and resilient - secure supply of spare parts - easy assembly - fits in every pick-up, depending on the size - Lockable drawers for extra security - recommended size for installation with hardtop - p
Product number: CB-800-S-A-00
€2,525.00*
Immediately available
Delivery from 29 November 2024
Carryboy transport box model CB-774
for all pickup models - side access - cargo management
CARRYBOY - storage box / transport box / tool box model 774 Storage box for convenient access to the loading area from the side - for sport and trade suitable in the right size for all pickups: for Volkswagen Amarok, Nissan Navara, Toyota Hilux, Ford Ranger, Mazda BT50, Isuzu D-max, SsangYong Actyon, Mitsubishi L200, Nissan Navara, etc. Standard in the following version: - Storage space approx. 0.25 cubic meters - universally applicable thanks to generous dimensions - Colour: powder coating matt black - Safely lockable with spring lock with 2 keys - Stainless steel hinge keeps lid open at 90° - Inside with dark grey, robust woven fabric clothing - Floor rubber mat - Mounting set for attachment to the side tail lift - assembly description - Rain seal When ordering, please indicate whether you want to install the storage box on the right or left in the direction of travel. The models are cut out according to the wheel housing, so this must also be specified.
Product number: CB-774
€675.00*
Immediately available
Delivery from 29 November 2024
Tip
Crossbar system increases ELEVATE RACK FS
for all pickup trucks
Variante - Modell: Elevate FS - Fullsize Trucks / Ranger / Gladiator
Equip your pickup truck of any brand with an Elevate Rack crossbar from NOVISauto. Expand your storage space with accessories from the storage and transport solutions section. Our accessories adapt seamlessly to your vehicle. The assembly kit and installation instructions are included. If required, we can carry out the professional installation of the accessories ourselves. Our employees are technically skilled, professionally competent and practically experienced. Your NOVISauto accessories at a glance: For all brands of all years NOVISauto accessories manufactured by Realt Truck Truxedo Can be combined with load compartment covers with rail system or T-slot system More space, more joy - Elevate Rack crossbar system is an ideal storage and transport solution The Elevate Rack is a unique solution for your pickup truck. Expand your cargo space with raised crossbars at cab height. This means no cargo space is lost on the bed. On the contrary - new chances and opportunities arise. More cargo space, more room. We offer various accessories to optimise the loading options. Choose between a roof basket, kayak holder, load securing and lashing clamps. Our unique solution can be combined with load area covers. So don’t hesitate and use this unique product!
Product number: TX-1118570
€1,395.00*
Immediately available
Delivery from 29 November 2024
Only 10 available
NOVISauto Autosafe 317 center console Ford F-150 from 2014
for Ford F150 from year 2014+
NOVISauto - car safe for center console US pickup Ford Series F from 2015+ Your smaller valuables, such as personal documents, passport, mobile phone, medication are safely stored in the NOVISauto car safe (optionally with USB socket). When accessing the content, the lid remains open. The look of the console with the built-in NOVISauto car safe corresponds to the standard equipment. The functions of the factory armrest and cover are fully retained, and the accessory tray can also be used. The steel container of the car safe has a durable textured powder coating and can be installed in just a few minutes without drilling. For which vehicles? The NOVISauto car safe for the Ford series F (Flow-Through-Center-Console) is available for: 2015+ Ford F150 2017+ Ford F250 2017+ Ford F350 2017+ Ford F450 2017+ Ford F550 2015-2021 ford F-150 2017-2021 ford raptors 2017-2021 ford super duty Dimensions: External dimensions (LxWxH in mm / inches) total: 368.3mm / 143.5" x 295.3mm / 11.63" x 215.9mm / 8.5" Volume: 23.5 liters Shipping Weight:. 4.1kg Security: The NOVISauto car safe made of 1.5 mm steel offers security and comfort, a safe and secure place for valuables and documents that you want to have close at hand when you are out and about. While preserving the exterior appearance of your original console, NOVISauto's car safe converts your OEM console into a heavy-duty, lockable storage area. Tuffy's Pry-Guard locking system with 10 tumblers and double-bit security key is used to protect valuables from unauthorized access. Comfort NOVISauto's car safe provides access to optional OEM USB and power outlets from the console. The innovative design utilizes an exclusive lid stay that keeps the lid open while accessing the contents. The lockable car safe remains unobtrusive under the original cover and, like the armrests and the accessory tray, is always fully usable.
Product number: TUF14-ConsoleSafe-317
€419.00*
Immediately available
Delivery from 29 November 2024
NOVISauto AutoSafe cassette safe portable with holder for vehicles
for all vehicles with enough space - permanently installed
TUFFY closure: 10 combination lock
The handy and compact solution for your valuables that you always want to carry with you. The valuables box from NOVISauto offers versatile protection for these items. Benefit from safe storage with maximum mobility at the same time. The portable valuables cassette is supplied with a holder for the vehicle. Additional holders, for example for installation in the house, in the caravan or elsewhere, are available from us. The safe cassette can be pushed into the holder and secured. To take the closed cassette with you, it can be removed from the holder again. The cassette can be stored elsewhere in another holder without opening it. Ideally suited as hunting equipment for the vehicle. Are you obliged to remove all valuables from the car or to keep them safe? The car safe offers a more convenient storage option for all valuable goods in the vehicle. Also ideally suited as camping equipment, installation for caravans, campers and pickups - residential structures. The only condition for installation: There must be enough space to hold the security cassette. Standard equipment: Portable slide-in cassette including a holder for permanent installation Install Bracket: Bolt to vehicle or other suitable surface with SAE J429 Grade 8 Fastening Kit (High Tensile Alloy Steel) Usage: Ideal for hunting or for locking valuables that you carry with you Robust workmanship and strength: 1.3mm thick steel - welded all around - matt black powder-coated Padded inside with foam Lid with seal and continuous hinge - including hand strap Standard lock: Exclusive lock for double-bit keys with 10 tumblers Alternative closure: Additional pressure cylinder lock for quick opening of the box External dimensions: 230mm length // 255mm width // 76mm height Inside dimensions: 155mm length // 240mm width // 50mm height
Product number: TU-28908901
€510.00*
Immediately available
Delivery from 29 November 2024
NOVISauto AutoSafe laptop security box for vehicles (max. 15 inch)
for all vehicles with enough space - permanently installed
Laptop security box for fixed or flexible installation in vehicles The laptop security box from NOVISauto offers convenient protection for your tablet or laptop in the vehicle. The steel container with a thick wall - lockable with a key or combination lock - is either firmly screwed into the vehicle or flexibly attached to a fixed point using a sheathed steel cable. The generous storage space of the box offers space for most laptops or tablets with a screen size of up to 15 inches. The inside of the safety box is lined with black foam to protect the electronics. Are you obliged to remove all valuables from the car? The car safe offers a more convenient storage option for all valuable goods in the vehicle. Also ideally suited as camping equipment, installation for caravans, mobile homes and pickups - residential structures. The only condition for installation: There must be enough space for the safety box. For safe, flexible installation, there should be an accessible fixing point for the steel sling. Standard equipment: Unique laptop safe for installation in all vehicles with enough space Fixed Installation : Bolt to vehicle using SAE J429 Grade 8 Fastening Kit (One of the highest tensile strength alloy steels available) - Standard Flexible installation : Reinforced steel sling, black coated, for attachment to a fixed point without screw connection or drilling - to be purchased as an extra Use : employees in the field and as camping equipment for caravans, residential structures or as a lockable security box for valuable tools / hunting equipment Robust workmanship and strength : Box welded all around from 1.3 mm steel plates - powder-coated matt black Lid with seal and continuous particularly stable hinge - 2.6mm material thickness Padding: up to 5 cm thick foam padding inside prevents damage and slipping of the contents Closure: Exclusive Pryguard lock with security key and weather seal. External dimensions: 465mm length // 135mm width // 362mm height Internal dimensions: 400mm length // 71mm width // 288mm height
Product number: TU-18201
€569.68*
Immediately available
Delivery from 29 November 2024
