NOVISauto trunk liner Amarok - RLVAD10
VW Amarok Double Cab 2010-2020
€425.00*
Product information "NOVISauto trunk liner Amarok - RLVAD10"
Cargo area liner for Volkswagen Amarok double cab 2010-2020 lower edge
- dimensionally stable, extremely hard-wearing and durable - therefore the best protection against scratches and damage to the loading area
- Protection against negative environmental influences (e.g. chemicals, acids, rust, etc.)
- precisely fitting and easy to assemble - no drilling required in the vehicle platform
- Including screw points for original lashing rails on the sides of the loading area
- ideally suited for an exceptionally long service life
- stable and easy to use
- for a variety of commercial uses
- made of durable polyethylene (HDPE)
- Economical in daily use, as it protects the paintwork at low cost
- Made in the USA - no re-import from the Far East.
Accesories
- Tailgate protection lower edge included
- assembly description
- with the necessary mounting accessories
| Construction year: | 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020 |
|---|---|
| Make/Model: | VW Amarok |
| ⓘ Accessories category: | pickup & bed protection |
| ⓘ Materials: | Plastic: Polyethylene (HDPE) |
| ⓘ Place of attachment: | truck bed |
| ⓘ Product suitable in combination with: | original cargo clamps |
| ⓘ Shockproof: | yes |
| ⓘ Supplied (separate) accessories: | tailgate protection |
| ⓘ approximate assembly time: | 15 min |
| ⓘ color: | black |
| ⓘ installation type: | clamps |
| ⓘ particularly UV-resistant: | yes |
| ⓘ particularly suitable for: | Protective function, daily use |
| ⓘ special feature: | easy cleaning, made from one part, robust, versatile use, weather proof |
| cabin length vehicle: | double cab |
| Untertitel: | VW Amarok Double Cab 2010-2020 |
| Serie: | Modell RLuR |
| Length in cm: | 155.5 |
| Delivery Time: | 1-2 weeks |
Do you have any questions or need further information? Then please give us a call.
Expert advice by phone +49 (0) 2151-393593 or by e-mail: info@carryboy.de
Cargo area liner for Volkswagen Amarok double cab 2010-2020 lower edge
- dimensionally stable, extremely hard-wearing and durable - therefore the best protection against scratches and damage to the loading area
- Protection against negative environmental influences (e.g. chemicals, acids, rust, etc.)
- precisely fitting and easy to assemble - no drilling required in the vehicle platform
- Including screw points for original lashing rails on the sides of the loading area
- ideally suited for an exceptionally long service life
- stable and easy to use
- for a variety of commercial uses
- made of durable polyethylene (HDPE)
- Economical in daily use, as it protects the paintwork at low cost
- Made in the USA - no re-import from the Far East.
Accesories
- Tailgate protection lower edge included
- assembly description
- with the necessary mounting accessories
NOVISauto care spray "TONNO TONIC" for all luggage compartment covers and tarpaulins made of ABS hard plastic and vinyl.
Tonno Tonic cares, cleans and gives your cover a fresh shine in a single step - it effectively protects against UV light. Tonno Tonic has been thoroughly tested and is 100% suitable for protecting all ABS hard plastic and vinyl covers. Remember to take care of your cover regularly! - she will thank you with a good, fresh appearance and a long life! Tonno Tonic protects against harsh weather, cold winter and hot summer days.
For care, simply spray Tonno Tonic on the previously cleaned tarpaulin. Wipe the surface dry with a clean cloth. Feel free to use Tonno Tonic to clean your tires - please wait 5 minutes after spraying before you can wipe the tire surface dry. Your rims will not be damaged.
Tonno Tonic is available in a 0.47 liter spray bottle or as a 6-pack for dealers.
CARRYBOY - aluminum cross member elliptical shape
for mounting on all CARRYBOY hardtops with roof rails
- Length of the crossbars 125 cm
- Sturdy aluminum with a satin finish
- Including rubber insert
- Including attachments (matching feet) for the hardtop roof rails
- Can be attached to the hardtop without drilling
The crossbars are ideal for attaching the CARRYBOY roof baskets - available in 5 different sizes.
CARRYBOY - aluminum cross member elliptical shape
for mounting on all CARRYBOY hardtops with roof rails
- Length of the crossbars 125 cm
- Sturdy aluminum with a satin finish
- Including rubber insert
- Including attachments (matching feet) for the hardtop roof rails
- Can be attached to the hardtop without drilling
The crossbars are ideal for attaching the CARRYBOY roof baskets - available in 5 different sizes.
Carryboy - full bed pull-out shelf - Pull-out shelf cut out of aluminum checker plate according to the contour of the wheel housing
This extendable loading floor is also available in combination with a drawer system in different sizes (CB-800).
- Easy loading and unloading - you save time with it!
- Non-slip, hard-wearing, easy-to-clean loading surface made of aluminum checker plate
- best quality in processing and design
- dimensionally stable, unbreakable and loadable up to approx. 350 kg
- secure supply of spare parts
- Simple assembly according to video and written assembly instructions
- Convenient securing of the load with the integrated lashing eyes
- The ball-bearing loading floor is unlocked with the handle
- The loading area is almost completely filled - Wheel housings are cut out
A notice: these products are so-called selection products, which are individually manufactured to your order. This pull-out drawer is divided into S / M / L categories in terms of dimensions. Due to the rectangular shape, the loading floor fits on different vehicles. As an option, the loading floor can be fully adapted to the vehicle. The area of the accessory drawer is expanded to include the area behind the wheel arches.
When ordering, please indicate the vehicle in question so that we can assign you the right vehicle. You can also choose between the pull-out loading floor in aluminum or covered with an anti-slip rubber coating.
Carryboy - Slide Floor Universal - Pull-out shelf made of aluminum checker plate with a three-sided frame for all mid-size pickup trucks
This extendable loading floor is also available in combination with a drawer system in different sizes (CB-800).
- Easy loading and unloading - you save time with it!
- Non-slip, hard-wearing, easy-to-clean loading surface made of aluminum checker plate
- best quality in processing and design
- dimensionally stable, unbreakable and loadable up to approx. 350 kg
- secure supply of spare parts
- Simple assembly according to video and written assembly instructions
- Convenient securing of the load with the integrated lashing eyes
- The ball-bearing loading floor is unlocked with the handle.
A notice: these products are so-called selection products, which are individually manufactured to your order. This pull-out drawer is divided into S / M / L categories in terms of dimensions. Due to the rectangular shape, the loading floor fits on different vehicles. As an option, the loading floor can be fully adapted to the vehicle. The area of the accessory drawer is expanded to include the area behind the wheel arches.
The universal loading floor CB-778 is available as an accessory for these pickup vehicles with the following dimensions:
- Size S (1020*1380*208) - Toyota Hilux Revo, Isuzu Dmax, Mitsubishi L200, Fiat Fullback
- Size M (1080*1380*208) - Ford Ranger, Nissan Navara NP300, Renault Alaskan
- Size L (1200*1440*208) - VW Amarok
- Size XL - with the appropriate width, but 1700 mm length for single and extracab pickups.
When ordering, please indicate the vehicle in question so that we can assign you the right vehicle. You can also choose between the pull-out loading floor in aluminum or covered with an anti-slip rubber coating.
Carryboy - Slide Floor Universal - Pull-out shelf made of aluminum checker plate with a three-sided frame for all mid-size pickup trucks
This extendable loading floor is also available in combination with a drawer system in different sizes (CB-800).
- Easy loading and unloading - you save time with it!
- Non-slip, hard-wearing, easy-to-clean loading surface made of aluminum checker plate
- best quality in processing and design
- dimensionally stable, unbreakable and loadable up to approx. 350 kg
- secure supply of spare parts
- Simple assembly according to video and written assembly instructions
- Convenient securing of the load with the integrated lashing eyes
- The ball-bearing loading floor is unlocked with the handle.
A notice: these products are so-called selection products, which are individually manufactured to your order. This pull-out drawer is divided into S / M / L categories in terms of dimensions. Due to the rectangular shape, the loading floor fits on different vehicles. As an option, the loading floor can be fully adapted to the vehicle. The area of the accessory drawer is expanded to include the area behind the wheel arches.
The universal loading floor CB-778 is available as an accessory for these pickup vehicles with the following dimensions:
- Size S (1020*1380*208) - Toyota Hilux Revo, Isuzu Dmax, Mitsubishi L200, Fiat Fullback
- Size M (1080*1380*208) - Ford Ranger, Nissan Navara NP300, Renault Alaskan
- Size L (1200*1440*208) - VW Amarok
- Size XL - with the appropriate width, but 1700 mm length for single and extracab pickups.
When ordering, please indicate the vehicle in question so that we can assign you the right vehicle. You can also choose between the pull-out loading floor in aluminum or covered with an anti-slip rubber coating.
CARRYBOY - Luggage net - Article 999
the right addition to Carryboy roof baskets
- in sizes 90 x 90 cm / 90 x 110 cm / 90 x 150 cm
- UV and weather resistant
- with hooks for quick, uncomplicated attachment
- with carry bag
- Best material and processing quality
- unbreakable and resilient
CARRYBOY has been building accessories for small pickup trucks: hardtops, tonneau covers, roll bars, running boards, roof racks, bumpers since 1969. We build hundreds of hardtops and tonneau covers and much more every day, which are sold in more than 150 countries worldwide.
If you have any questions, please contact us by telephone on 02151-393593 or by e-mail at info@carryboy.de
Please ask for the exact delivery time
Item No. CB-550x
CARRYBOY - roof basket made of stainless steel,
light and very stable aluminum with matching crossbars
Available in 4 different sizes and 2 colors (silver or black):
CB-550x-00 100*100cm
CB-550x-01 100*120cm
CB-550x-02 100*160cm
CB-550x-03 100*130cm
The luggage rack can be mounted on most cars, SUVs, VANs, pickups, trucks and Carryboy hardtops with suitable fasteners (self-assembly is possible). - No drilling required!
- Dimensionally stable, unbreakable and resilient
- easy to assemble - do it yourself -
- available in different dimensions
- secure supply of spare parts
The roof basket is supplied with crossbars and can be attached to the roof rails using the mounting kit supplied.
Appropriate fasteners (roof racks) are required for attachment to SUVs and pickup truck cabs.
If you have any questions, please contact us by telephone on 02151-393593 or by e-mail at info@carryboy.de
Please ask for delivery times for additional sizes.
Item No. CB-550x
CARRYBOY - roof basket made of stainless steel,
light and very stable aluminum with matching crossbars
Available in 4 different sizes and 2 colors (silver or black):
CB-550x-00 100*100cm
CB-550x-01 100*120cm
CB-550x-02 100*160cm
CB-550x-03 100*130cm
The luggage rack can be mounted on most cars, SUVs, VANs, pickups, trucks and Carryboy hardtops with suitable fasteners (self-assembly is possible). - No drilling required!
- Dimensionally stable, unbreakable and resilient
- easy to assemble - do it yourself -
- available in different dimensions
- secure supply of spare parts
The roof basket is supplied with crossbars and can be attached to the roof rails using the mounting kit supplied.
Appropriate fasteners (roof racks) are required for attachment to SUVs and pickup truck cabs.
If you have any questions, please contact us by telephone on 02151-393593 or by e-mail at info@carryboy.de
Please ask for delivery times for additional sizes.
Item No. CB-763-2400A
CARRYBOY - Roof Rack Tradesman
120 x 240 cm with attachment
The luggage rack can be mounted on the CSV Tradesman special body (suitable for models CSV, S560, SO, S8, S7, S6) with suitable fastening elements.
- Best quality in processing and design
- at an attractive price
- dimensionally stable, unbreakable and resilient
- easy to assemble
Also available in dimensions:
120 x 190 cm - Article no. CB-763-1900A for double cabin / extra cabin
The CARRYBOY roof rack in hammer finish is supplied with the appropriate holders for the desired hardtop / box body.
If your hardtop already has roof rails, we recommend sealing the existing holes in advance. The holders for the roof load system have different attachment points that have to be created on site on the hard top / box body.
CARRYBOY has been building accessories for small pickup trucks: hardtops, tonneau covers, roll bars, running boards, roof racks, bumpers since 1969. We build hundreds of hardtops and tonneau covers and much more every day, which are sold in more than 150 countries worldwide.
€425.00*
€35.00*
€595.00*
€275.00*
€1,800.01*
€1,675.00*
€1,700.00*
€55.00*
€750.00*
€399.99*
€1,300.00*
Passendes Zubehör
